Clas Ohlson KT-3268-UK User manual

KT-3268-UK
Clas Ohlson
Brand
Clas Ohlson
Model
KT-3268-UK
Category
Alarm clocks
Type
User manual

This manual is also suitable for

English
GREAT BRITAIN • customer service
tel: 0845 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
1 5
6
7
2
3
4
8 11
9 12
15
10 13
14
Ver. 20140609
Clock Radio
Art.no 18-2924 Model KT-3268 UK VERSION
36-5775 KT-3268 NORDIC
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for
any errors in text or images and any necessary changes made
to technical data. In theevent of technical problems or other
queries, please contact our Customer Services.
Safety
• Theproduct should not be taken apart or modified. Certain
non-shielded components inside theclock radio’s casing
carry dangerous current. Contact with these can lead to fire
or electric shock.
• Theclock radio is designed for indoor use only.
• Theclock radio should only be connected to awall outlet
with a230 V, 50 Hz power supply.
• Never expose theproduct to high temperatures from
cookers, radiators or other types of heat sources. Never
subject theclock radio to dusty environments, heavy
vibration, impacts, humidity or moisture.
• Never run its mains lead around sharp edges/corners or in
such away where its lead risks being pinched or damaged
in some other fashion. Place the mains lead where there is
no risk of people tripping over it.
• Do not place theclock radio where there is arisk of it falling into
water or other liquid. Do not place any objects containing
liquid on theclock radio, such as vases, drinks, etc.
• Do not cover theclock radio. Do not place theclock radio
on soft, unstable surfaces such as on blankets, comforters
or similar. Always place it on asolid flat surface to prevent it
from possible overheating. Make sure to keep at least 5 cm
of free space around theclock radio.
• Switching off theclock radio with its power switch only
puts it into standby mode. It does not totally cut it off from
themains. Pull theplug from thewall socket to disconnect
theclock radio completely from themains.
• Remember always to protect your hearing. Listening on
high volume for prolonged periods can lead to permanent
hearing loss.
• Theclock radio must only be repaired by authorised service
technicians and only using genuine spare parts.
Buttons and functions
1. [ VOL+/AL2 ] volume up, alarm 2 settings
2. [ VOL-/AL1 ] volume down, alarm 1 settings
3. [ SNOOZE/DIMMER/SLEEP ] settings
4. [ MEMORY/TIME SET ] station presets, time settings
5. [ TUNING-/HOUR ] Back, hour settings
6. [ TUNING+/MINUTE ] Forward, minute settings
7. [
/FUNCTION ] On/off, function settings
8. PM indicator, 12-hour clock only
9. Alarm 1 indicator with “buzzer” alarm
10. Alarm 1 indicator with radio alarm
11. Sleep timer indicator
12. Alarm 2 indicator with “buzzer” alarm
13. Alarm 2 indicator with radio alarm
14. Mains lead
15. FM aerial
Operating instructions
Batteries
• Batteries are used for backup which preserve time settings
during apower cut.
• Thedisplay will not show thetime during apower cut but all
settings will be saved.
Note: Thealarm will not sound when run strictly on thebatteries.
1. Open thebattery cover on thebottom of theclock radio.
2. Insert 2×AA/LR06 batteries. Note thepolarity markings in
thebattery compartment to ensure correct battery insertion.
3. Refit thebattery cover.
English
GREAT BRITAIN • customer service
tel: 0845 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
Ver. 20140609
Setting thetime
Note: You have no more than about a3-second interval
between setting thehours and minutes. Theclock radio will
revert back to its original setting if you wait more than 3 seconds
between these two stages.
1. Hold in [ TIME SET ] for 2 seconds until the “24 H” symbol
shows in thedisplay.
2. Press [ MEMORY/TIME SET ] to confirm your selections.
Theclock display should then begin flashing.
3. Press or hold in [ TUNING-/HOUR ] to set thehours.
4. Press or hold in [ TUNING+/MINUTE ] to set theminutes.
5. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
confirm your settings.
Setting thealarm
• Two separate alarms are available, alarm 1 (AL1) and
alarm 2 (AL2).
• Select either radio or “buzzer”.
1. Press [
/FUNCTION ] until theclock display appears.
2. Make sure that theclock is set to thecorrect time.
3. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] (depending on whether you
are setting alarm 1 or 2) for 2 seconds until “0:00” appears.
4. Press or hold in [ TUNING-/HOUR ] to set thehours.
5. Press or hold in [ TUNING+/MINUTE ] to set theminutes.
6. Press [ VOL-/AL1 ] or [ VOL+/AL2 ] again to select thetype of
alarm, radio or “buzzer”. Your selection will be indicated
(9, 10, 12 and 13) on thedisplay.
7. Press [ MEMORY/TIME SET ] to confirm your selections.
Deactivating thealarm/s
1. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] until theset alarm time
begins flashing.
2. Short press [ VOL-/AL1 ] or [ VOL+/AL2 ] twice so that both
alarm indicators disappear.
3. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
deactivate thealarm.
Snooze
When thealarm sounds, press [ SNOOZE/DIMMER/SLEEP ]
to activate thesnooze function. Thealarm will sound again
after 9 minutes.
Sleep timer
1. Press [ /FUNCTION ] to turn theradio on.
2. Hold in [ SNOOZE/DIMMER/SLEEP ] until “90” appears.
3. Short press [
/FUNCTION ] again to select thedesired
sleep timer setting (90, 80, 70, 60, 50, 40, 30, 20 and
10 minutes).
4. To deactivate thesleep timer, repeat steps 1 and 2 as
described above until thedisplay shows “OFF”.
Display backlight
Short press [ SNOOZE/DIMMER/SLEEP ] at any time to adjust
thebacklight.
FM radio
Note: Try moving theaerial to another position whenever
you experience bad FM reception. You may also try moving
theradio to another location to address this problem.
1. Make sure that theFM aerial is fully extended.
2. Press [
/FUNCTION ] to turn theradio on.
3. Hold in [ TUNING-/HOUR ] or [ TUNING+/MINUTE ] until
thestation scan begins or short press [ TUNING-/HOUR ]
and/or [ TUNING+/MINUTE ] to search for stations manually.
4. Adjust thevolume level using, [ VOL-/AL1 ] or [ VOL+/AL2 ].
Saving station presets
20 station presets are available.
1. Select thedesired radio station.
2. Hold in [ MEMORY/TIME SET ] until anavailable preset slot
begins flashing.
3. Press [ TUNING-/HOUR ] or [ TUNING+/MINUTE ] for
selecting aspecific preset (1–20).
4. Press [ MEMORY/TIME SET ] to save thestation.
5. You may also save thestation onto anexisting occupied
preset by saving over it.
Selecting existing presets
1. Press [ /FUNCTION ] to turn theradio on.
2. Press [ MEMORY/TIME SET ] repeatedly until thedesired
preset appears.
Care and maintenance
• Unplug theclock radio before cleaning it with adamp cloth.
Use only mild cleaning agents for cleaning, never solvents
or corrosive chemicals.
• Unplug themains lead during thunderstorms or if theclock
radio is not to be used for any extended period.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Rated voltage 230 V, 50 Hz
Batteries 2×AA/LR6
Frequency range FM 87.5–108.0MHz
Size 12 x 11 x 4.5 cm
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Clas Ohlson KT-3268-UK User manual

KT-3268-UK
Clas Ohlson
Brand
Clas Ohlson
Model
KT-3268-UK
Category
Alarm clocks
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents