Land Pride CSA10 Series User manual

Brand: Land Pride

Model: CSA10 Series

Type: User manual

This manual is also suitable for

CSA10

Table of Contents

Cover photo may show optional equipment not supplied

with standard unit.

For an Operator’s Manual and Decal Kit in French

Language, please see your Kubota dealer.

Read the Operator’s Manual entirely. When you see this symbol,

the subsequent instructions and warnings are serious - follow

without exception. Your life and the lives of others depend on it!

Compact Loader Auger

AP-CSA10

317-407MK

Operator’s Manual

Printed 9/30/20

7369873698

9/30/20

AP-CSA10 Compact Loader Auger 317-407MK

Machine Identification

Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new

manual.

If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were

originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by

adding the machine weight and measurements provided in the Specifications & Capacities Section of this manual with

the Option(s) weight and measurements.

Dealer Contact Information

Model Number

Serial Number

Machine Height

Machine Length

Machine Width

Machine Weight

Delivery Date

First Operation

Accessories

Name:

Street:

City/State:

Telephone:

Email:

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov

California Proposition 65

Table of Contents

Kubota provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Kubota

assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Kubota reserves the right

to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Kubota is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

9/30/20

AP-CSA10 Compact Loader Auger 317-407MK

Table of Contents

Important Safety Information . . . . . . . . . . . . . 1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 9

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Further Assistance . . . . . . . . . . . . . . . . . . . . . . . . 9

Section 1: Assembly & Set-up . . . . . . . . . . . 10

Compact Utility Loader Requirements . . . . . . . . . . 10

Torque Requirements . . . . . . . . . . . . . . . . . . . . . . 10

Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Spring Hose Clamp Installation . . . . . . . . . . . . . . . 11

Auger Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Auger Disassembly . . . . . . . . . . . . . . . . . . . . . . . . 12

Auger & Extension Assembly . . . . . . . . . . . . . . . . 13

Auger Extension Disassembly . . . . . . . . . . . . . . . . 13

Section 2: Operating Procedures . . . . . . . . . 14

Operator’s Responsibilities . . . . . . . . . . . . . . . . . . 14

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 14

Compact Utility Loader Shutdown Procedure . . . . 15

Hook-up Compact Loader Auger . . . . . . . . . . . . . . 16

Hook-Up Auger Hitch Plate . . . . . . . . . . . . . . . . 16

Hook-Up Hydraulic Hoses . . . . . . . . . . . . . . . . . 17

Check Equipment Clearances . . . . . . . . . . . . . . . . 17

Unhook Compact Loader Auger . . . . . . . . . . . . . . 17

Lock Swivel Brackets . . . . . . . . . . . . . . . . . . . . . . 18

Position Auger on The Ground . . . . . . . . . . . . . . 18

Lock Double Swivel Bracket . . . . . . . . . . . . . . . . 18

Lock Single Swivel Bracket . . . . . . . . . . . . . . . . 18

Unlock Swivel Brackets . . . . . . . . . . . . . . . . . . . . . 19

Unlock Double Swivel Bracket . . . . . . . . . . . . . . 19

Unlock Single Swivel Bracket . . . . . . . . . . . . . . . 19

Transport Compact Loader Auger . . . . . . . . . . . . . 20

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . 20

Dual-Angle Teeth . . . . . . . . . . . . . . . . . . . . . . . . . 21

General Operation . . . . . . . . . . . . . . . . . . . . . . . . 22

Section 3: Options & Accessories . . . . . . . . . 23

Auger Extensions (Accessory) . . . . . . . . . . . . . . . 23

Dirt Augers (Option) . . . . . . . . . . . . . . . . . . . . . . . 23

Tree Augers (Option) . . . . . . . . . . . . . . . . . . . . . . . 23

Dirt & Tree Auger Teeth . . . . . . . . . . . . . . . . . . . . 23

Rock Auger (Option) . . . . . . . . . . . . . . . . . . . . . . . 24

Bolt-on Rock Heads (Accessory) . . . . . . . . . . . . . . 24

Rock Auger Teeth . . . . . . . . . . . . . . . . . . . . . . . . . 24

Puff Auger (Option) . . . . . . . . . . . . . . . . . . . . . . . . 25

Section 4: Maintenance & Lubrication . . . . . 26

General Maintenance . . . . . . . . . . . . . . . . . . . . . . 26

Daily Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Motor/Gearbox Disassembly . . . . . . . . . . . . . . . . . 26

Disassembly & Assembly of Motor . . . . . . . . . . . . 27

Motor/Gearbox Assembly . . . . . . . . . . . . . . . . . . . 27

Long-Term Storage . . . . . . . . . . . . . . . . . . . . . . . . 28

Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . . 29

Gearbox Output Shaft . . . . . . . . . . . . . . . . . . . . 29

Gearbox Lube Fluid Level . . . . . . . . . . . . . . . . . 29

Hydraulic Motor Output Shaft . . . . . . . . . . . . . . . 29

Section 5: Specifications & Capacities . . . . . 30

Section 6: Features and Benefits . . . . . . . . . 32

Section 7: Troubleshooting . . . . . . . . . . . . . . 33

Section 8: Torque Values Chart . . . . . . . . . . . 35

Section 9: Warranty & Legal Disclaimer . . . . 36

Table of Contents Continued

Parts Manual QR Locator

The QR (Quick Reference) code on the

cover and to the left will take you to the

Parts Manual for this equipment.

Download the appropriate App on your

smart phone, open the App, point your

phone on the QR code and take a picture.

Dealer QR Locator

The QR code on the left will

link you to available dealers

for Kubota products. Refer to

Parts Manual QR Locator on

this page for detailed

instructions.

Table of Contents

9/30/20AP-CSA10 Compact Loader Auger 317-407MK

See previous page for Table of Contents.

Important Safety Information

9/30/20

Important Safety Information

Listed below are common practices that may or may not be applicable to the products

described in this manual.



Safety at All Times

Careful operation is your best

assurance against an accident.

All Operators, no matter how much

experience they may have, should

carefully read this manual and

other related manuals, or have the

manuals read to them, before

operating the stand-on compact

utility loader and attachments.

 Thoroughly read and understand

the “Safety Label” section. Read

all instructions noted on them.

 Do not operate the stand-on

compact loader while under the

influence of drugs or alcohol as

they impair the ability to safely and

properly operate the machine.

 Operator should be familiar with all

functions of the stand-on compact

loader and attachments and be

able to handle emergencies

quickly.

 Make sure all guards and shields

appropriate for the operation are in

place and secured before

operating the stand-on compact

loader and attachments.

 Keep all bystanders away from

stand-on compact loader and work

area.

 Start the stand-on compact loader

from the Operator platform with

steering levers and hydraulic

controls in neutral.

 Never dismount from a moving

stand-on compact loader or leave

it unattended with engine running.

 Do not allow anyone to stand

between an attachment and the

stand-on compact loader while

hooking-up.

 Keep hands, feet, and clothing

away from power-driven parts.

 While transporting and operating

equipment, watch out for objects

overhead and along side such as

fences, trees, buildings, wires, etc.

 Store the stand-on compact loader

in an area where children normally

do not play. When needed, secure

attachment from falling with solid,

non concrete support blocks.

Safety Precautions for

Children

Tragedy can occur if the Operator

is not alert to the presence of

children. Children generally are

attracted to stand-on compact

loaders and their work.

 Never assume children will remain

where you last saw them.

 Keep children out of the work area

and under the watchful eye of a

responsible adult.

 Be alert and shut the attachment

and machine down if children

enter the work area.

 Never carry children on the

machine or attachment. There is

not a safe place for them to ride.

They may fall off and be run over

or interfere with the control of the

machine.

 Never allow children to operate the

power machine, even under adult

supervision.

 Never allow children to play on the

machine or attachment.

 Use extra caution when backing

up. Before the machine starts to

move, look down and behind to

make sure the area is clear.

Stand-on Compact Loader

Shutdown And Storage

 Reduce engine speed, park on

solid, level ground, disengage

auxiliary hydraulics and lower

attachment until it is flat on the

ground or sold non concrete

support blocks.

 Turn off engine and turn off the

power switch to prevent

unauthorized starting.

 Relieve all hydraulic pressures.

 Wait for all components to stop

before leaving Operator platform.

 Carefully step down from the

Operator platform.

Look for the Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety and extra precaution

must be taken. When you see this symbol, be alert and

carefully read the message that follows it. Hazard

control, and accident prevention are dependent upon the

awareness, concern, prudence, and proper training of

personnel involved in the operation, transport,

maintenance, and storage of equipment.

Be Aware of

Signal Words

A signal word designates a degree or

level of hazard seriousness. The

signal words are:

Indicates a hazardous situation that, if

not avoided, will result in death or

serious injury.

Indicates a hazardous situation that, if

not avoided, could result in death or

serious injury.

Indicates a hazardous situation that, if

not avoided, may result in minor or

moderate injury.

WARNING

CAUTION

DANGER

Important Safety Information

9/30/20

Dig Safe - Avoid

Underground Utilities

 USA: Call 811

CAN: digsafecanada.ca

Always contact your local utility

companies (electrical, telephone,

gas, water, sewer, and others)

before digging so that they may

mark the location of any

underground services in the

area.

 Be sure to ask how close you can

work to the marks they

positioned.

Listed below are common practices that may or may not be applicable to the products

described in this manual.

Transport Safely

 Comply with federal, state, and local

laws.

 Use towing vehicle and trailer of

adequate size and capacity. Secure

the stand-on compact loader to the

trailer with chocks, tie downs, and

chains.

 Sudden braking can cause a towed

trailer to swerve and upset. Reduce

speed if towed trailer is not equipped

with brakes.

 Avoid contact with any overhead

utility lines or electrically charged

conductors.

 IMPORTANT: Do not tow a load that

is more than double the weight of the

vehicle towing the load.

Operate Safely

 Always drive with load on end of

loader arms low to the ground.

 Always drive straight up and down

slopes with heavy end of the stand-

on compact loader on the “uphill”

side.

 Engage park brake when stopped on

an incline.

Practice Safe Maintenance

 Understand procedure before doing

work. Refer to the Operator’s Manual

for additional information.

 Work on a level surface in a clean

dry area that is well-lit.

 Lower attachment to the ground and

follow all shutdown procedures

before leaving the Operator platform

to perform maintenance.

 Do not work under any hydraulically

supported equipment. It can settle,

suddenly leak down, or be lowered

accidentally. If it is necessary to work

under the equipment, securely

support it with stands or suitable

blocking beforehand.

 Use properly grounded electrical

outlets and tools.

 Use correct tools and equipment for

the job that are in good condition.

 Allow machine to cool before

working on it.

 Disconnect battery ground cable (-)

before servicing or adjusting

electrical systems or before welding

on machine.

 Inspect all parts. Make certain that

parts are in good condition &

installed properly.

 Replace parts on the stand-on

compact loader with genuine Kubota

parts only. Do not alter this machine

in a way which will adversely affect

its performance.

 Do not grease or oil while the

machine is in operation.

 Remove buildup of grease, oil, or

debris.

 Always make sure any material and

waste products from the repair and

maintenance of the machine are

properly collected and disposed of.

 Remove all tools and unused parts

from the machine before operation.

Keep Riders Off

Machinery

 Never carry riders on the stand-

on compact loader or attachment.

 Riders obstruct Operator’s view

and interfere with the control of

the machine.

 Riders can be struck by objects

or thrown from the machine.

 Never use stand-on compact

loader or attachment to lift or

transport riders.

Important Safety Information

9/30/20

These are common practices that may or may not be applicable to the products described in

this manual.

Prepare for Emergencies

 Be prepared if a fire starts.

 Keep a first aid kit and fire

extinguisher handy.

 Keep emergency numbers for

doctor, ambulance, hospital, and

fire department near phone.

911

Wear Personal Protective

Equipment (PPE)

 Wear protective clothing and

equipment appropriate for the job

such as safety shoes, safety,

glasses, hard hat, dust mask,

and ear plugs.

 Clothing should fit snug without

fringes and pull strings to avoid

entanglement with moving parts.

 Prolonged exposure to loud noise

can cause hearing impairment or

hearing loss. Wear suitable

hearing protection such as

earmuffs or earplugs.

 Operating a machine safely

requires the Operator’s full

attention. Avoid wearing

headphones while operating

equipment.

Avoid High Pressure

Fluids

 Escaping fluid

under pressure can

penetrate the skin

causing serious injury.

 Relieve all residual pressure

before disconnecting hydraulic

lines or performing work on the

hydraulic system.

 Make sure all hydraulic fluid

connections are properly

tightened/torqued and all

hydraulic hoses and lines are in

good condition before applying

pressure to the system.

 Use a piece of paper or

cardboard, NOT BODY PARTS,

to check for suspected leaks.

 Wear protective gloves and

safety glasses or goggles when

working with hydraulic systems.

 DO NOT DELAY. If an accident

occurs, see a doctor familiar with

this type of injury immediately.

Any fluid injected into the skin or

eyes must be treated within a few

hours or gangrene may result.

Important Safety Information

9/30/20

Avoid crystalline Silica

(quartz) Dust

Because crystalline silica is a basic

component of sand and granite,

many activities at construction sites

produce dust containing crystalline

silica. Trenching, sawing, and boring

of material containing crystalline

silica can produce dust containing

crystalline silica particles. This dust

can cause serious injury to the

lungs (silicosis).

There are guidelines which should

be followed if crystalline silica

(quartz) is present in the dust.

 Be aware of and follow OSHA

(or other local, State, or Federal)

guidelines for exposure to airborne

crystalline silica.

 Know the work operations where

exposure to crystalline silica may

occur.

 Participate in air monitoring or

training programs offered by the

employer.

 Be aware of and use optional

equipment controls such as water

sprays, local exhaust ventilation,

and enclosed cabs with positive

pressure air conditioning if the

machine has such equipment.

Otherwise respirators shall be worn.

 Where respirators are required, wear

a respirator approved for protection

against crystalline silica containing

dust. Do not alter respirator in any

way. Workers who use tight-fitting

respirators can not have beards/

mustaches which interfere with the

respirator seal to the face.

 If possible, change into disposable

or washable work clothes at the

work site; shower and change into

clean clothing before leaving the

work site.

 Do not eat, drink, use tobacco

products, or apply cosmetics in

areas where there is dust containing

crystalline silica.

 Store food, drink, and personal

belongings away from the work

area.

 Wash hands and face before eating,

drinking, smoking, or applying

cosmetics after leaving the exposure

area.

Listed below are common practices that may or may not be applicable to the products

described in this manual.

Handle

Chemicals Properly

 Protective clothing should be

worn.

 Handle all chemicals with care.

 Follow instructions on container

label.

 Agricultural chemicals can be

dangerous. Improper use can

seriously injure persons, animals,

plants, soil, and property.

 Inhaling smoke from any type of

chemical fire can be a serious

health hazard.

 Store or dispose of unused

chemicals as specified by the

chemical manufacturer.

Important Safety Information

9/30/20

This page intentionally left blank.

Important Safety Information

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

Safety Labels

Your Compact Loader Auger comes equipped with all safety

labels in place. They are designed to help you safely operate

your attachment. Read and follow their directions.

1. Keep all safety labels clean and legible.

2. Refer to this section for proper label placement. Replace

all damaged or missing labels. Order new labels from your

nearest Kubota dealer. To find your nearest dealer, visit

our dealer locator at www.landpride.com.

3. Some new equipment installed during repair requires

safety labels to be affixed to the replaced component as

specified by Kubota. When ordering new components make

73701

sure the correct safety labels are included in the request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean surface area where label is to be placed.

b. Spray soapy water onto the cleaned area.

c. Peel backing from label and press label firmly onto the

surface.

d. Squeeze out air bubbles with edge of a credit card or

with a similar type of straight edge.

838-293C

Warning: Read Operator’s Manual

844-194C

Danger: Underground Utilities Hazard

Important Safety Information

AP-CSA10 Compact Loader Auger 317-407MK9/30/20

Table of Contents

73701

838-094C

Warning: High Pressure Fluid Hazard

838-294C

Danger: Rotating Auger Hazard

858-148C

Warning: Pinch Point Hazard

Important Safety Information

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

73701

73702

Puff Auger

Option

Rock Auger

Option

Dirt Auger

Option

135500

Danger: Inhalation, Electrical, & Entanglement Hazard

1-Place on Puff Auger Option

1-Place on Rock Auger Options

1-Place on Dirt Auger Options

844-001C

Danger: Hot

Introduction

AP-CSA10 Compact Loader Auger 317-407MK9/30/20

Table of Contents

Introduction

Owner Assistance

The Online Warranty Registration should be completed

by the dealer at the time of purchase. This information is

necessary to provide you with quality customer service.

The parts on your Compact Loader Auger have been

specially designed by Kubota/Land Pride and should only

be replaced with genuine Kubota parts. Contact a Kubota

dealer if customer service or repair parts are required.

Your Kubota dealer has trained personnel, repair parts,

and equipment needed to service this attachment.

Serial Number

For quick reference and prompt service, record model

and serial number on the inside cover page and again on

the warranty page. Always provide model number and

serial number when ordering parts and in all

correspondences with your Kubota dealer. For location of

your serial number plate, see Figure 1.

CSA10 Series Serial Number Plate

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new

attachment. If for any reason you do not understand any

part of this manual or are not satisfied with the service

received, the following actions are suggested:

1. Discuss any problems you have with your attachment

with your dealership service personnel so they can

address the problem.

2. If you are still not satisfied, seek out the owner or

general manager of the dealership, explain the

question/problem, and request assistance.

3. For further assistance write to:

Kubota by Land Pride

Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedep[email protected]

73701

Kubota welcomes you to the growing family of new

product owners. This Compact Loader Auger has been

designed with care and built by skilled workers using

quality materials. Proper assembly, maintenance, and

safe operating practices will help you get years of

satisfactory use from this product.

Application

Kubota’s CSA10 Compact Loader Auger is designed for

attaching to compact loaders with a CII hitch plate. It

features a hydraulically driven 10-20 gpm (38-76 Lpm)

motor coupled to a planetary gearbox that can

accommodate dirt augers ranging from 6" to 24"

(15 cm to 61 cm) in diameter.

The CSA10 is designed to deliver up to 2620 ft-lbs

(3552 Nm) of torque to meet the heavy duty needs of

nurseries, landscapers, contractors, construction

companies, farmers, ranchers, and municipalities.

The CSA10 is well suited for digging in a variety of soils.

Performance in compacted soil conditions can be

improved by applying down pressure with the loader

arms. The reversible rotation allows augers to be

extracted from the soil easier and reduces strain on both

the auger and compact loader.

See “Specifications & Capacities” on page 30 and

“Features & Benefits” on page 32 for additional

information and performance enhancing options.

Using This Manual

•

This Operator’s Manual is designed to help familiarize

you with safety, assembly, operation, adjustments,

troubleshooting, and maintenance. Read this manual

and follow the recommendations to help ensure safe

and efficient operation.

• The information contained within this manual was

current at the time of printing. Some parts may change

slightly to assure you of the best performance.

• To order a new Operator’s or Parts Manual, contact

your authorized dealer. Manuals can also be

downloaded, free-of-charge, from our website at

www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by

facing the direction the machine will operate while in use

unless otherwise stated.

Definitions

IMPORTANT: A special point of information related

to the following topic. Kubota’s intention is this

information must be read & noted before continuing.

NOTE: A special point of information that the

operator should be aware of before continuing.

Section 1: Assembly & Set-up

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

Compact Utility Loader Requirements

The auger is designed to attach to compact utility loaders

meeting the following requirements:

Hitch type . . . . . . . . . . . . . . . . . . . . *CII Quick-Attach

Max. hydraulic pressure rating . . 3000 psi (20.7 MPa)

Hydraulic flow rate . . . . . . . 10-20 gpm (38-76 L/min)

Hydraulic outlets . . . . . . . . . . . . . .1 male & 1 female

* CII (Common Industry Interface)

WARNING

To avoid serious injury or death:

• Consult your power machine Operator’s Manual for

operating capacity, lifting capacity, and operating

specifications. Exceeding rated capacities and

specifications can result in loss of control, roll-over or other

serious hazard.

• Lightweight power machines may need weight added to the

rear to maintain steering control and prevent forward

tipping or side tipping caused by a heavy front load. Consult

your power machine Operator’s Manual to determine proper

weight requirements and maximum weight limitations.

Torque Requirements

Refer to “Torque Values Chart” on page 35 to determine

correct torque values when tightening hardware.

Before You Start

WARNING

To avoid serious injury or death:

Allow only persons to operate this attachment who have fully

read and comprehended this manual, who have been properly

trained in the safe operation of this attachment, and who are

age 16 or older. Serious injury or death can result from the

inability to read, understand, and follow instructions provided

in this manual.

This Compact Loader Auger has been partially

assembled at the factory. Some additional preparations

will be necessary to finish assembling the attachment.

Make sure the intended compact utility loader conforms

to the “Compact Utility Loader Requirements” provided

above. Read and understand the operator’s manual for

your Compact Loader Auger. An understanding of how it

works will aid in the assembly and setup of the auger.

Go through the “Pre-Assembly Checklist” on this page

before assembling the Compact Loader Auger. Speed up

your assembly task and make the job safer by having all

needed parts and equipment readily at hand.

Section 1: Assembly & Set-up

Pre-Assembly Checklist

 Check Reference

Have a fork lift or loader with properly sized chains and safety

stands capable of lifting and supporting the equipment on hand.

Have a minimum of two people available during assembly.

Make sure all major components and loose

parts are shipped with the attachment.

Operator’s

Manual

Double check to make sure all parts, fasteners

and pins are installed in the correct location to

lessen the chance of using a bolt incorrectly,

Refer to the Parts Manual if unsure.

NOTE: All assembled hardware from the

factory has been installed in the correct

location. Remember location of a part or

fastener if removed. Keep parts separated.

Operator’s

Manual

317-407MK

Parts Manual

317-407PK

Make sure working parts move freely, bolts are

tight & cotter pins are spread.

Operator’s

Manual

Make sure all safety labels are correctly

located and legible. Replace if damaged.

Page 6

Section 1: Assembly & Set-up

AP-CSA10 Compact Loader Auger 317-407MK9/30/20

Table of Contents

Spring Hose Clamp Installation

WARNING

To avoid serious injury or death:

Keep body, body extremities, loose clothing, pull strings, etc.

away from pinch points such as rotating, extending, and/or

retracting components. Secure pinch point areas to ensure

they will not move before working on or near them.

Refer to Figure 1-1:

1. Lock single swivel bracket (#19) with clevis pins (#20)

and secure with hairpin cotters (#21). Refer to “Lock

Swivel Brackets” on page 18 for detailed

instructions.

2. Attach spring (#3) to the auger hitch plate with

1/2"-13 x 1 1/4" GR5 bolt (#1), flat washer (#2), and

hex whiz nut (#4) as shown. Tighten whiz nut to the

correct torque.

Refer to Figure 1-2:

3. Insert 5/16" x 3" bolt (#5) through cover plate (#6)

and upper clamp half (#7).

4. Position upper clamp half (#7) above hydraulic hoses

(#13 & #14) as shown and insert bolt (#5) between

the hoses.

Refer to Figure 1-1:

5. Continue inserting bolt (#5) through lower clamp

half (#8), cover plate (#9), fender washer (#10),

spring (#3), and fender washer (#11).

Refer to Figure 1-2:

6. Secure bolt (#5) with nylock nut (#12). Draw nylock

nut up snug, do not tighten at this time.

7. Unlock single swivel bracket (#19). For detailed

instructions, Refer to “Unlock Swivel Brackets” on

page 19.

8. Adjust length of hoses (#13 & #14) between

elbows (#17 & #18) and hose clamps (#7 & #8) to

allow for full side to side movement of single swivel

bracket (#19) and full front to back movement of

double swivel bracket (#22) without stressing

elbows (#17 & #18).

9. Tighten nut (#12) to the correct torque for a

5/16"-18 GR5 bolt.

Install Spring Mounted Hose Clamp Assembly

Figure 1-1

Install Spring Mounted Hose Clamp Assembly

Figure 1-2

73721

73723

Section 1: Assembly & Set-up

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

Auger Assembly

Refer to Figure 1-3:

1. Lock single swivel bracket (#1) with clevis pins (#3)

and secure with hairpin cotters (#5). For detailed

instructions, refer to “Lock Swivel Brackets” on

page 18.

2. Lock double swivel bracket (#2) with clevis pins (#4)

and hairpin cotters (#5), For detailed instructions,

refer to “Lock Swivel Brackets” on page 18.

3. Support output shaft (#7) level with a 3" (8 cm) high

support block (#6) placed under double swivel

bracket (#2). See also Figure 1-4 on page 13.

4. Align holes (Y & Z) with each other and slide

auger (#8) onto output shaft (#7) until the larger hole

(Y) is in-line with hole (Z).

5. Insert 3/4"-10 x 4 1/2"bolt (#9) through auger hole (Y)

and output shaft hole (Z). Secure bolt with nylock

nut (#10). Tighten nylock nut to the correct torque.

NOTE: When installing and removing auger (#8), it

is recommended that the CSA10 be attached to a

loader. Refer to “Hook-up Compact Loader

Auger” on page 16.

Auger Disassembly

Refer to Figure 1-3:

1. Lock single swivel bracket (#1) with clevis pins (#3)

and secure with hairpin cotters (#5). For detailed

instructions, refer to “Lock Swivel Brackets” on

page 18.

2. Lock double swivel bracket (#2) with clevis pins (#4)

and hairpin cotters (#5), For detailed instructions,

refer to “Lock Swivel Brackets” on page 18.

3. Support output shaft (#7) level with a 3" (8 cm) high

support block (#6) placed under double swivel

bracket (#2). See also Figure 1-4 on page 13.

4. Remove nylock nut (#10) and bolt (#9).

5. Remove auger (#8) from output shaft (#7).

6. Replace bolt (#9) and nylock nut (#10) in auger (#8)

for safe keeping.

NOTE: When installing and removing auger (#8), it

is recommended that the CSA10 be attached to a

loader. Refer to “Hook-up Compact Loader

Auger” on page 16.

Auger Installation

Figure 1-3

74290

Section 1: Assembly & Set-up

AP-CSA10 Compact Loader Auger 317-407MK9/30/20

Table of Contents

Auger & Extension Assembly

Refer to Figure 1-4:

1. Lock single swivel bracket (#1) with clevis pins (#3)

and secure with hairpin cotters (#5). For detailed

instructions, refer to “Lock Swivel Brackets” on

page 18.

2. Lock double swivel bracket (#2) with clevis pins (#4)

and hairpin cotters (#5), For detailed instructions,

refer to “Lock Swivel Brackets” on page 18.

3. Support output shaft (#7) level with a 3" (8 cm) high

support block (#6) placed under double swivel

bracket (#2) as shown.

Refer to Figure 1-4:

1. Slide auger extension (#12 or #13) onto output shaft

(#7) until larger hole (Y) is in-line with hole (Z).

2. Insert 3/4"-10 x 4 1/2"bolt (#9) through hole (Y) in

extension (#12 or #13) and output shaft hole (Z).

Secure bolt with nylock nut (#10). Tighten nylock nut

to the correct torque.

3. Slide auger (#8) over auger extension (#12 or #13)

until hole (X) is in-line with hole (A or B) in extension

(#12) or hole (A, B, C or D) in extension (#13).

4. Insert 1/2"-13 x 4 1/4" GR5 bolt (#14) through

hole (X) in auger (#8). Secure bolt with nylock

nut (#15). Tighten nylock nut to the correct torque.

NOTE: When installing and removing auger

extension (#12 or #13), it is recommended that the

CSA10 be attached to a loader. Refer to “Hook-up

Compact Loader Auger” on page 16.

Auger Extension Disassembly

Refer to Figure 1-4:

1. Lock single swivel bracket (#1) with clevis pins (#3)

and secure with hairpin cotters (#5). For detailed

instructions, refer to “Lock Swivel Brackets” on

page 18.

2. Lock double swivel bracket (#2) with clevis pins (#4)

and hairpin cotters (#5), For detailed instructions,

refer to “Lock Swivel Brackets” on page 18.

3. Support output shaft (#7) level with a 3" (8 cm) high

support block (#6) placed under double swivel

bracket (#2) as shown.

Refer to Figure 1-4:

4. Remove nylock nut (#15) and 1/2" bolt (#14) from

auger (#8).

5. Remove auger (#8) from extension (#12 or #13).

6. Remove nylock nut (#10) and bolt (#9) from auger

extension (#12 or #13).

7. Remove auger extension (#12 or #13) from

output shaft (#7).

8. Replace 1/2" bolt (#14) and nylock nut (#15) in

extension hole (A) for safe keeping as shown on

extension (#13).

9. Reattach Auger (#8) to output shaft (#7) with

3/4"-10 x 4 1/2" bolt (#9) and nylock nut (#10).

Tighten nylock nut to the correct torque.

NOTE: When installing and removing auger

extension (#12 or #13), it is recommended that the

CSA10 be attached to a loader. Refer to “Hook-up

Compact Loader Auger” on page 16.

Auger Installation

Figure 1-4

74297

Section 2: Operating Procedures

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

Operator’s Responsibilities

Hazard control and accident prevention are dependent

upon the awareness, concern, prudence, and proper

training involved in the operation, transport, storage, and

maintenance of the Compact Loader Auger. Therefore, it

is absolutely essential that no one operates the auger

unless they are age 16 or older and have read, fully

understood, and are totally familiar with the Operator’s

Manual.

Perform the following inspections before using your

Compact Loader Auger.

Safety Information

DANGER

To avoid serious injury or death:

• All guards and shields must be installed and in good

working condition while operating the attachment.

• Always operate equipment from the operator’s platform.

Never operate equipment while standing next to the

machine.

• Make sure the site is free from hazards before drilling. Look

for obstacles on the ground, beneath mulching, and below

the ground that may need to be removed such as landscape

fabric, wire, etc. Hand digging may be necessary to verify

the presence of underground materials.

• Keep attachment, loader arms, and/or load away from

overhead electrical power lines. Place an orange warning

sign under overhead lines indicating type of danger above.

• Never make contact with underground utilities such as

electrical power lines, gas lines, phone lines, etc. They can

cause serious injury or death from electrocution, explosion,

or fire. Always call 811 (USA) before digging so that they

can mark the location of underground services in the area.

For contact information, see Dig Safe in the “Important

Safety Information” starting on page 1.

Operating Checklist



Check Page

Read and follow all safety rules carefully.

Refer to “Important Safety Information”.

Make sure all guards and shields are in place.

Refer to “Important Safety Information”.

Make sure there are no hydraulic leaks.

Refer to “Avoid High Pressure Fluids Hazard”.

Read and follow hook-up & preparation.

Refer to “Section 1: Assembly & Set-up”.

Read and follow all operating procedures.

Refer to “Section 3: Options & Accessories”.

Read and follow all maintenance instructions.

See “Section 4: Maintenance & Lubrication”.

Read and follow all lubrication instructions.

Refer to “Lubrication Points”.

Make sure gearbox is properly lubricated.

Refer to gearbox lubrication.

Check equipment initially and periodically for

loose hardware. See “Torque Values Chart”.

• Do not allow anyone to manually push down on the auger,

or put anything or anyone on the attachment for the purpose

of adding weight to the attachment. Objects and people can

be thrown, pinched, or entangled in the auger.

• Keep all persons away from the auger while lowering and

raising the unit. A person can be hit, pinched, or crushed by

the unit.

• Do not drill through landscape fabric. Prior to drilling, cut

a hole in the fabric sufficiently larger than the diameter of

the auger to prevent auger entanglement with the fabric.

Fabric caught in the auger can pull a bystander into the

auger.

• Do not allow anyone to manually guide the auger to

position its point on the ground while it is rotating. A person

will become entangled in the auger or hit by the auger.

• Keep others away from the post hole digger while the auger

is rotating. A person can become entangled in the auger or

hit by the auger if it swings erratically. Anyone helping

should be kept a safe distance (a minimum of 10 feet or 3

meters) from the unit while it is rotating.

• Do not remove spoil-pile with hand tools while auger is

operating. The person can become entangled in the auger or

hurt by tools that become entangled in the auger.

• Do not go near or under raised loader arms without first

securing loader arms in the raised position with an

approved lift-arm support.

• Keep mud, snow, ice, and debris off the standing platform

and out of the controls.

• Always secure equipment with solid, non-concrete supports

before working under it. Never go under equipment

supported by concrete blocks or hydraulics. Concrete can

break, hydraulic lines can burst, and/or hydraulic controls

can be actuated even when power to hydraulics is off.

WARNING

To avoid serious injury or death:

• Always start the engine from the operator's platform. Do

not start the engine while standing next to the machine.

• Allow only persons to operate this attachment who have

fully read and comprehended this manual, who have been

properly trained in the safe operation of this attachment,

and who are age 16 or older. Serious injury or death can

result from the inability to read, understand, and follow

instructions provided in this manual.

• Always shut power machine down following the “Shutdown

Procedure” provided in this manual before leaving the

operator’s standing platform.

• Keep body, body extremities, loose clothing, pull strings,

etc. away from pinch points such as rotating, extending,

and/or retracting components. Secure pinch point areas to

ensure they will not move before working on or near them.

• Never work near utilities such as gas lines, electrical lines,

or other hazards that can cause serious injury or death from

electrocution, explosion, or fire.

Section 2: Operating Procedures

AP-CSA10 Compact Loader Auger 317-407MK9/30/20

Table of Contents

•

Do not travel across inclines where equipment could slip or

roll-over. Consult your power machine Operator’s Manual

for acceptable inclines they are capable of crossing.

• Never carry riders on the attachment or power machine.

Riders can obstruct the operator’s view, interfere with

controls, be pinched by moving components, become

entangled in rotating components, struck by objects, thrown

about, fall off and be run over, etc.

• Hydraulic fluid under high pressure can penetrate the skin

and/or eyes causing a serious injury. Wear protective gloves

and safety glasses or goggles when working with hydraulic

systems. Use a piece of cardboard or wood rather than

hands when searching for leaks. A doctor familiar with this

type of injury must treat the injury within a few hours or

gangrene may result. DO NOT DELAY.

• Check hitch fit-up frequently. An improper fit-up can cause

the attachment to come loose from the loader hitch plate

and fall.

• Always travel with adequate clearance between ground and

auger. Hitting an object while traveling can damage

equipment and cause operator to lose control.

• Always transport with attachment carried low to protect

against rollover, hitting overhead objects, power lines, and

loss of control.

• Do not install a bolt that is longer than what was originally

supplied with the auger. Protruding hardware is more likely

to entangle a bystander by catching on loose clothing.

• This attachment has a 3000 psi (20.7 kPa) maximum

hydraulic pressure rating. Make sure your powered

machine’s hydraulic pressure to this attachment does not

exceed 3000 psi (20.7 kPa). Exceeding this rating can result

in equipment damage, serious injury, or death.

• Do not use this attachment to lift, carry, push or tow other

equipment or objects. It is not properly designed or guarded

for this use. The operator could lose control resulting in

equipment damage and/or tipping hazard.

• Protect freshly dug holes immediately after digging by

filling it with a post, covering the hole with a cover capable

of supporting a person, or place a physical boundary

around the hole to stop entry into the area.

• Do not use post hole digger to wrap wire or any other items.

Doing so can result in bodily injury and/or damage to the

equipment.

• Avoid exposure to dust containing crystalline silica

particles. This dust can cause serious injury to the lungs

(silicosis). Because crystalline silica is a basic component

of sand and granite, many activities at construction sites

produce dust containing crystalline silica. Trenching,

sawing, and boring of material containing crystalline silica

can produce dust containing crystalline silica.

CAUTION

To avoid minor or moderate injury:

• Auger tip gets hot after digging. Allow time for the tip to

cool before touching or servicing the tip.

Compact Utility Loader Shutdown

Procedure

The following are basic compact loader shutdown

procedures. Follow these procedures and any additional

shutdown procedures provided in your compact loader

Operator’s Manual before leaving the operator’s platform.

1. Park compact utility loader and attachment on solid,

level ground.

2. Reduce engine speed.

3. Shut-off auxiliary power to the attachment.

4. Lower loader arms until they are fully down or until

the attachment is flat on the ground or on

non-concrete support blocks.

5. Turn off the compact utility loader engine. Refer to

the compact utility loader Operator’s Manual for

engine shutdown procedures.

6. If the compact utility loader is equipped with a

hydraulic pressure relief lever, move the lever back

and forth to relieve all hydraulic pressures to the

loader arm. See your compact utility loader

Operator’s Manual for additional instructions on how

to release the hydraulic pressures.

7. Wait for all components to come to a complete stop

before leaving the operator’s platform.

8. Use grab-handles, and anti-slip surfaces when

stepping on and off the compact utility loader.

Section 2: Operating Procedures

AP-CSA10 Compact Loader Auger 317-407MK 9/30/20

Table of Contents

Hook-up Compact Loader Auger

DANGER

To avoid serious injury or death:

A crushing hazard exists while hooking-up and unhooking the

attachment. Do not allow anyone to stand between attachment

and power machine while approaching or backing away from

the attachment. Do not operate lift and/or tilt controls while

someone is near the power machine and/or attachment.

WARNING

To avoid serious injury or death:

• Use steps, grab-handles, and anti-slip surfaces on the

compact loader to get on and off the loader. Using

unapproved stepping surfaces and/or handholds can result

in a falling hazard.

• Check hitch fit-up frequently. An improper fit-up can cause

the attachment to come loose from the loader hitch plate

and fall.

• Consult your power machine Operator’s Manual for

operating capacity, lifting capacity, and operating

specifications. Exceeding rated capacities and

specifications can result in loss of control, roll-over or other

serious hazard.

Hook-Up Auger Hitch Plate

Refer to Figure 2-1 on page 16:

1. Check loader and auger hitch plates before hooking-

up the auger. Make sure all components are in good

working condition before putting them into service:

a. Check for and remove any debris in the loader

and auger hitch plates.

b. Check for structural cracks in the hitch plates.

Repair or replace hitch plates as needed.

c. Check hitch components frequently. Repair or

replace any part that is excessively worn, bent,

broken, or missing.

d. Lubricate lock pins (#1) at the prescribed interval

in your compact loader manual.

e. Check operation of lock pins (#1). Lock pins must

move freely and extend fully into the hitch plate

bottom slots (#5).

2. Raise lock pins (#1) by rotating the handles 180

until

they point out as shown.

3. Use anti-slip steps/surfaces and grab handles on the

compact loader when stepping on and off the unit.

4. Start compact loader.

5. Drive slowly to the auger making sure the loader

hitch plate top (#2) is parallel with the auger’s top

angle bar (#4).

6. Tilt top of loader hitch plate (#2) slightly forward.

7. Place top of loader’s hitch plate (#2) under the

auger’s top angled bar (#4) and slowly raise loader

hitch plate (#3) up until the loader hitch plate is

seated under the top angle bar.

8. Tilt top of loader hitch plate (#2) back until the auger

hitch plate (#6) makes full contact with the face of

loader hitch plate (#3) and auger hitch plate (#6) is

slightly off the ground.

9. Shut compact loader down before dismounting.

Follow “Compact Utility Loader Shutdown

Procedure” on page 15.

10. Lower lock pins (#1) by rotating the handles 180

until they point in. If needed tap on lock pins to drive

them down through bottom slots (#5).

11. Check hitch hook-up to verify it is locked properly.

a. Make sure top of loader hitch plate (#2) is fully

seated under the auger’s top angle bar (#4).

b. Make sure bottom of loader hitch plate (#3) is

seated against auger hitch plate (#6)

c. Make sure lock pins (#1) are fully inserted through

bottom slots (#5) and are fully down.

Hook-up & Unhook Compact Loader Auger

Figure 2-1

74302

Page is loading ...

Land Pride CSA10 Series User manual

Brand: Land Pride

Model: CSA10 Series

Type: User manual

This manual is also suitable for

CSA10

Download PDF

report

Land Pride CSA10 Series User manual

This manual is also suitable for

Land Pride CSA10 Series User manual

Related papers

Other documents