Greenlee 758 Ratchet Cutter Blade User manual

Brand: Greenlee

Model: 758 Ratchet Cutter Blade

Type: User manual

SERVICE BULLETIN

50035487

Blade Replacement Kit

for 758 Heavy-duty Ratchet

Guy Wire Cutter

Read and understand all of the instructions and

safety information in this manual before operating

or servicing this tool.

50035487 Blade Replacement Kit

Replacing the Blades

To release tension on chain drive:

1. Clamp the handle assembly in a vise so that the

handles are horizontal.

2. Spread the handles apart to extend the chain drive.

3. Place a screwdriver or other device through the

chain about three links away from the handle. This

removes tension on the chain and makes it easier to

change blades. Make sure the screwdriver will not

slip out during the blade changing procedure.

To remove and replace cutting blade:

1. Remove the pivot bolt, washers, and nut.

2. Remove the cutting blade shoulder bolts, washers,

and nuts.

3. Slide the old cutting blade from between the holder

blades.

4. Slide in the new cutting blade.

5. Reinstall the hardware. The pivot bolt should be

snug but turn freely in the assembly.

To remove and replace insert blade and blade holders:

1. Remove the pivot bolt, washers, and nut.

2. Remove the insert blade shoulder bolts, washers,

and nuts.

3. Slide the old insert blade from between the holder

blades.

4. Remove and replace blade holders by removing bolts.

5. Slide in the new insert blade.

6. Reinstall the hardware.

Introduction

This service bulletin describes how to replace the

blades on the Greenlee 758 Guy Wire Cable Cutter.

It should be used in conjunction with the instruction

manual for this cutter.

Wear eye protection when operating

or servicing this tool.

Failure to wear eye protection could

result in serious eye injury from ying

debris.

The cutting blade and insert blade are a matched set.

Replace both blades at the same time.

KEEP THIS MANUAL

Handle Assembly

Pivot Bolt

Cutting Blade

Shoulder

Bolts

Cutting Blade

Insert Blade

Shoulder

Bolts

Blade Holder Bolts

Blade Holder

For more detailed parts information,

refer to the instruction manual for

this tool: 99921715 (IM 1267).

4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070

USA Tel: 800-435-0786

Fax: 800-451-2632

Canada Tel: 800-435-0786

Fax: 800-524-2853

International Tel: +1-815-397-7070

Fax: +1-815-397-9247

www.greenlee.com

Greenlee 758 Ratchet Cutter Blade User manual

Greenlee 758 Ratchet Cutter Blade User manual

Greenlee 758 Ratchet Cutter Blade User manual

Related papers