Greenlee 40790 Chain Brake Shroud User manual

Hello! I am an AI chatbot trained to assist you with the Greenlee 40790 Chain Brake Shroud User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

SERVICE BULLETIN

40790 Chain Brake

Shroud Replacement

for use on HPS513CB

and HCS8160CB Chain Saws

Read and understand all of the instructions and

safety information in this manual before operating

or servicing this tool.

40790 Chain Brake Shroud Replacement

Important Safety Information

Read and understand all of the

instructions and safety information

in this bulletin before operating or

servicing this tool. Refer also to the

instruction manuals for your saw.

Failure to observe this warning could

result in severe injury or death.

Wear eye protection when operating

or servicing this tool.

Failure to wear eye protection could

result in serious eye injury from ying

debris or hydraulic oil.

Instructions

1. Loosen bowden pin (2) to release cable (6).

2. Remove shoulder bolt (5) and washers (4).

3. Remove socket head cap screw (3).

4. Slide cable (6) from bowden pin (2) on shroud (1).

5. Repeat steps in reverse order, replacing shroud (1),

shoulder bolt (5), and washers (4) with new congu-

ration (shown below) contained in kit.

4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070

USA Tel: 800-435-0786

Fax: 800-451-2632

Canada Tel: 800-435-0786

Fax: 800-524-2853

International Tel: +1-815-397-7070

Fax: +1-815-397-9247