MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame Installation User manual

Type
User manual

MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame Installation

The MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame is a versatile and durable message center perfect for displaying important messages, reminders, and other materials. With its spacious 36"x48" surface, it provides ample room for posting documents, photos, and other items. The rubber tackboard surface is easy to use and allows for quick and easy posting and removal of items. The sturdy aluminum frame ensures durability and longevity, making it ideal for use in high-traffic areas. The unit can be mounted securely to the wall using the included mounting hardware, and the recommended mounting height is 78" from the floor to the top of the unit. The included instructions provide clear and concise guidance on the mounting process.

MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame Installation

The MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame is a versatile and durable message center perfect for displaying important messages, reminders, and other materials. With its spacious 36"x48" surface, it provides ample room for posting documents, photos, and other items. The rubber tackboard surface is easy to use and allows for quick and easy posting and removal of items. The sturdy aluminum frame ensures durability and longevity, making it ideal for use in high-traffic areas. The unit can be mounted securely to the wall using the included mounting hardware, and the recommended mounting height is 78" from the floor to the top of the unit. The included instructions provide clear and concise guidance on the mounting process.

Ghent 36"x48" 2-Door Rubber
Tackboard w/ Bronze
Alum. Frame - Black
Instruction Manual
WIDTH
HEIGHT
B
76-7/16"
78" REF.
A
A
FLOOR LINE
2
5
16
"
1
5
16
"
DETAIL A
For the most secure mounting of the unit, install all mounting screws directly to wall studs. When wall studs can
not be used we recommend using hollow wall anchors.
The recommended mounting height of the unit is 78" from the floor to the top of the unit.
Mounting Instructions:
1.) Scribe a level line on the wall at 76-7/16"
2.) Space the holes using the attached charts.
3.) Drill and install the mounting hardware and allow
the screw head to protrude 1/4" max from the wall.
4.) Hang unit onto protruding screw heads using the
sheet metal brackets on the rear of the unit.
NOTE:
To mount a 96" long unit, use the "L"-hangers
(provided) in addition to wall anchors (not provided)
and follow the mounting instructions enclosed with
the "L"-hangers.
**Important**:
Units with lighted headers require electrical installation by a licensed electrician. Consult your local electrical code
to determine the correct method of installation.
The lamps have been mounted in the unit, but have not been wired.
Access to the lamps can be made by removing the rear panel of the header section of the unit.
**Important**: Specific u
nits that are designed for outdoor use are water-resistant, not water-proof. When being hung outdoors, unit should
be under cover to prevent damage.
Message Center
Instruction Sheet
ISMCT9709 10-14
NOTE:
For permanent mounting, drill a 1/8"
hole through the back of the sheet
metal brackets. The hole should be
located at 1-5/16" vertical & 2-5/16"
horizontal. Fasten to the wall with 2"
#8 self-tapping screws.
(Before
drilling through the face of the board
make sure to score the board surface
so that it doesn't get tangled in the
screw.)
1
Unit
Width
18" 24" 30" 36" 48" 60" 72" 96"
A
14-
13
16
"
20-
13
16
"
26-
13
16
"
32-
13
16
"
43-
15
16
"
55-
15
16
"
67-
1
16
"
92-
13
16
"
Unit
Height
24" 36" 48"
B
20-
7
8
"
32-
7
8
"
44-
1
16
"
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
Gently tap corner
with door open.
Largest door gap
ISMCT9709 10-14
Message Center
Instruction Sheet
Your new Ghent Message Center has been assembled and inspected to Ghent's high quality
standards. Occassionally during shipment, your message center's door(s) may shift. This shift results
in an uneven gap between the door(s) and the body of your unit.
The uneven gap is easily remedied. Mount your unit per the instructions on page 1. Then simply
open the affected door(s) and gently tap the door corner opposite the largest gap (see the figure
above). When you tap the door, be sure to use a rubber mallet or a block of wood and a hammer so
the door's finish is not marred. After you've tapped the door corner, close the door and inspect the
surrounding gap. If needed repeat the tapping procedure.
2
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
  • Page 1 1
  • Page 2 2
  • Page 3 3

MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame Installation User manual

Type
User manual

MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame Installation

The MyBinding Ghent 2 Door Rubber Tackboard W Alum Frame is a versatile and durable message center perfect for displaying important messages, reminders, and other materials. With its spacious 36"x48" surface, it provides ample room for posting documents, photos, and other items. The rubber tackboard surface is easy to use and allows for quick and easy posting and removal of items. The sturdy aluminum frame ensures durability and longevity, making it ideal for use in high-traffic areas. The unit can be mounted securely to the wall using the included mounting hardware, and the recommended mounting height is 78" from the floor to the top of the unit. The included instructions provide clear and concise guidance on the mounting process.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI