AIS Hutch Mount Tackboards Calibrate Installation

Type
Calibrate Installation
1
C-CXTBINSTALL Revision date 09-20-2017
Calibrate Installation
Hutch Mount Tackboards
Tool Rail
RL-TRxx
#8 x ¾” long
Flat head wood screw
Philips Drive #2
RH-WSFP834
Tackboard
Install Top
Bracket
A-WMTBB
onto Tackboard
Remove tape backing
from top brackets prior
to installing tackboards
Tool Rail
Tackboard
Hutch
Bottom
Brackets
Install Bottom Brackets
A-WMTBB
to Hutch using #10 x ¾” long
Flat head wood screw
Philips Drive #2
RH-WSFP1034
2
C-CXTBINSTALL Revision date 09-20-2017
Calibrate Installation
Wall Mount Tackboards
Tool Rail
RL-TRxx
#8 x ¾” long
Flat head wood screw
Philips Drive #2
RH-WSFP834
Tackboard
Install Top
Brackets
A-WMTBB
onto Tackboard
Remove tape backing
from top brackets prior
to installing tackboards
Tool Rail
Tackboard
Wall
Secure Bottom Brackets
A-WMTBB
to studs in wall using #8 or #10
drywall screws (not included)
  • Page 1 1
  • Page 2 2

AIS Hutch Mount Tackboards Calibrate Installation

Type
Calibrate Installation

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI