ASI AWPUC2-G-4.2A-02W Installation guide

ASI Wall Plate Charger Installation Guide

Please Read Before Installing the Product!

1. Turn Off Power to the AC Outlet Before Installation.

2. NOT for Use with GFCI AC Outlets.

3. When Installed Correctly and Working, Green LED will appear in the USB

Connector Slot.

TROUBLESHOOTING:

Wall Plate USB Charger Will Not Snap onto the AC Outlet

Wall Plate USB Charger Installed But Not Working, No Green LED

ASI

Automation Systems Interconnect, Inc

Innovative Interconnect and Interface Solutions

Wire Connection Screws are

Backed Out Too Far.

Solution: Access Side

Wiring Screws, Turn In

Enough to Accept Charger

and Make Contact with

Wall Plate Contact.

Wire Connection Screws are

Turned In Too Far, Not Making

Contact.

Solution: Access Side

Wiring Screws, Turn Out

Enough to Make Good

Contact with Wall Plate

Contacts.