Page is loading ...
Helpful Installation Tips
For Your New Watts Faucet
During shipping the
toggle bolt on your new
faucet may push up out
of position. Prior to
installing hold the faucet
as shown in the picture
pull down on the wing nut
this will make sure the
orings are in their proper
position and your faucet
will have a good seal.
Disassembling your faucet
is never recommended this
could void your warranty. If
you have to remove the
fitting at the end of the
toggle bolt you must insert
the 3/8” blue tube prior to
reconnecting the fitting.
There are small orings that
could be pushed out of
position if the blue tube is
not fully inserted first.
/
