2. Liehuzhekeji
  3. Car Backup Camera and Monitor Kit, 7 Inch HD Quad Split Monitor 4 Pieces Waterproof IR Night Vision Front&Rear&Side View Cameras for Car RV Truck Pickup Van Camper Reversing Use

Liehuzhekeji Car Backup Camera and Monitor Kit, 7 Inch HD Quad Split Monitor 4 Pieces Waterproof IR Night Vision Front&Rear&Side View Cameras for Car RV Truck Pickup Van Camper Reversing Use User manual

  • Hello! I am an AI chatbot trained to assist you with the Liehuzhekeji Car Backup Camera and Monitor Kit, 7 Inch HD Quad Split Monitor 4 Pieces Waterproof IR Night Vision Front&Rear&Side View Cameras for Car RV Truck Pickup Van Camper Reversing Use User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instructions
Dear Customer,
Thanks you for purchased podofo wired backup camera.
Install the items is a very interesting thing, please follow the diagram and
instructions.
1. Please check the parts in the package:
1 x Quad Split Monitor
2 x Side view camera
1 x Rear view camera
1 x Front view camera
4 x Video cable
5 x Power Cable
1 x Suction cup holder
1 x Dashboard stand
1 x IR remote control
1 x Install instructions
1 x Sun hood
2. Connect the monitor with the extension cable tightly.
3. Find the rear view camera and connect the rear camera with the reverse
light.
4. Connect the front camera and side view camera with the
constant 12-24V power source.
5. All the Red port of the power cable to the Positive (+), and the black
port of the power cable to the Ground (-).
6. Connect the camera to the monitor directly by 10 meters video cable.
There is no specification of the camera and port, so you can connect any
camera to any port as your convenience.
Attention:
1. Do not open the casing if without authorization to avoid electric shock
cased by inner high voltage.If there is any problem,please switch off the
monitor immediately and then contact us.
2. Use matching cable only and correct connection is required. The
maximum car voltage is 12-24V,Lower the voltage if it is over 24V for
use.
3. Leave the blue/green cable alone when you connect the rear camera to
reverse light.
If you need any support please feel free to contact us at
liehuzhekeji@yeah.net
Thanks & Best wishes!
Liehuzhekeji shop
/