Mounting Bracket for STAND-TV03E
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pt-st-va03e
SKU: PT-ST-VA03E
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2 3
STEP 2
Attach the square plate (1) to the square
plate connectors (3) with M6x10 bolts
(5) and eight M6 washers (10) using
Allen wrench from tool kit (4).
PACKAGE CONTENTS
TOOLS NEEDED
70lbs
(31.75kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
1 (x1)
Square Plate
2 (x1)
TV Arm Set
9 (x4)
M4 Washer
10 x12)
M6 Washer
11 (x4)
M8
Washer
12 (x6)
M4 Spacer
M6/8 (20mm)
Spacer
4 (x1)
Tool Kit
5 (x8)
M6x10
6 (x4)
M4x12
M4x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
13 (x8)
M6/8 (5mm)
Spacer
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3
YEARS. ADULT SUPERVISION IS REQUIRED.
8 (x4)
M8x20
M8x35
M8x45
ASSEMBLY STEPS
STEP 1
Slide the square plate connectors and
rubber pads (3) over the top of the poles
on your VIVO STAND-TV03E TV cart.
Tighten the grub screws using Allen
wrench from tool kit (4).
3 (x2)
Square Plate
Connector and
Rubber Pad
7 (x4)
M6x20
M6x35
STEP 3
Clip bubble level from tool kit (4) onto
the square plate (1). Adjust the level of
the square plate by loosening the grub
screw on the back of the square plate
connector (3). Retighten grub screw
when square plate is level.
STEP 4
Secure TV arm set (2) to the back of
your TV using bolts (6, 7, 8) and washers
(9, 10, 11), depending on the size and
depth of the mounting holes in the TV.
For curved or recessed back TVs, spacers
(12, 13) may be required.
STEP 5
Attach the TV arm set (2) with TV to
the square plate (1). Tighten the safety
bolts on the bottom of the TV arm set to
secure the TV to the stand. If additional
leveling and height adjustment is
required aer TV is attached, repeat
Step 3.
STEP 6
If used to upgrade a VIVO STAND-
TV03E TV cart to hold dual screens, we
recommend positioning both TVs to
face forward with one mounted over
the other. Please note that the shelf
included with STAND-TV03E cannot be
attached when two TVs are mounted.
110lbs
(49.90kg)
SINGLEDUAL
LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
-
1
-
2
-
3
Vivo STAND-KIT-TV03E User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vivo STAND-TV03E User manual
-
-
-
-
-
-
-
-
-