Extron SMB 1 Template

Mounting & Cable Access Cut-Out

Template for the Extron

SMB 1

User Access

Outer Edge

(Do not cut this line.)

Cable Access Cut-out

(optional) 1" dia.

1/16" Pilot Holes

(x4)

1. Confirm the product to be installed.

2. After printing, measure the cut-out template

and pilot hole locations to verify accurate dimensions.

3. Fix the cut-out template to the mounting location.

4. Mark the pilot holes and the center of the cable access cut-out.

5. Drill the pilot holes.

6. If required, cut the cable access opening with a hole saw.

4.25" (107.95 mm)

2.125" (53.98 mm)

2.25" (57.15 mm)

1.29" (32.77 mm)

0.96" (24.38 mm)

68-2616-01 Rev. A

Page size: 8.5" x 11"

Print scale 1:1

Do not shrink.