Extron SMB 303 Template

1.50 inches

(38.1 mm)

2.31 inches (58.7 mm)

4.62 inches (117.5 mm)

1.90 inches

(48.2 mm)

SMB 303

Direct Furniture Mounting

and

Cutout Template

1. Conﬁrm product to be installed.

2. After printing, measure the cutout template

and pilot hole locations to verify accurate dimensions.

3. Fix cutout template to mounting location.

4. Mark pilot holes and cutout center location.

5. Drill pilot holes.

6. If required, cut the cable access opening with a hole saw.

68-1945-01

Rev. A

12 10

Print this

template

at 100% on

11” x 8.5” paper

Drill 1/16 inch (1.6 mm)

Pilot Holes (x4)

Cable Access

Cutout (Optional)

Diameter = 1 inch (min.)

Outer Edge

(Do not cut this line)