Kromtek AK-035LA User manual

Type
User manual

This manual is also suitable for

The Kromtek AK-035LA is a 3.5-inch ultra-high brightness rearview mirror monitor with a variety of features to enhance your driving experience:

High-Reflectance Mirror: Provides a clear and comfortable view, even in strong light conditions.

Back-Up Camera Display: Automatically switches to display the rearview camera feed when the vehicle is in reverse.

Auto-Adjusting Screen Brightness: Adjusts the screen's brightness based on ambient light levels to ensure optimal visibility.

Adjustable Guide Lines: Customizable guide lines assist with distance estimation while reversing.

The Kromtek AK-035LA is a 3.5-inch ultra-high brightness rearview mirror monitor with a variety of features to enhance your driving experience:

High-Reflectance Mirror: Provides a clear and comfortable view, even in strong light conditions.

Back-Up Camera Display: Automatically switches to display the rearview camera feed when the vehicle is in reverse.

Auto-Adjusting Screen Brightness: Adjusts the screen's brightness based on ambient light levels to ensure optimal visibility.

Adjustable Guide Lines: Customizable guide lines assist with distance estimation while reversing.

ksize.ru
Ultra high brightness mirror monitor
User manual
E
13
AK-035LA AK-043LA EK-035LABK-043LA DK-043LA EK-043LA HK-043LA
ksize.ru
Product intruction
Installation and wire
Basic functionsoptional functions
Table of contents
Chapter One: Product introduction .......................2
1.1 Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter two: Installation and wire. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 How to install high brightness mirror monitor . . . . . . . . . . . 5
2.3 Special bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 How to install reverse camera . . . . . . . . . . . . . . . . . . . . . . . . 6
2.5 How to wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter three: Basic functions..............................9
3.1 High reflection mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 Back up camera display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 The screen brightness adjust automatically . . . . . . . . . . . . . 9
3.4 Glass and bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter four: Optional function. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Adjustable guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4 Parking sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.5 Special for GM On Star and HYUNDAI Blue Link system. . . 21
4.6 Dimming functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ksize.ru
2
1
Product intruction
Installation and wire
Basic functionsoptional functions
Introduction
Chapter one: Product Introduction
4.3TFT-
LCD
480(H)
×272(V)
Screen
Size
16 : 9 DC 12V
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
PAL/
AUTO/
NSTC
Mode number Color
Depth
Working
Voltage
Video
Input
Signal
System
Display
Screen
Aspect
Resolution
AK/EK-035LA
AK/EK-043LA
BK-043LA
3.5
4.3
TFT-
LCD
TFT-
LCD
320(H)
×240(V)
480(H)
×272(V)
4: 3
16 : 9
DC 12V
DC 12V
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
PAL/
AUTO/
NSTC
PAL/
AUTO/
NSTC
4.3TFT-
LCD
480(H)
×272(V) 16 : 9 DC 12V
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
PAL/
AUTO/
NSTC
DK-043L A
1.3 Specification
User's Manual
Welcome to use our ultra high brightness Rearview mirror monitor.
●We reserve the final explanaon right on this User's Manual.
●Specificaons are subject to change without noce. Sorry for any inconvenience
caused!
●Please make a copy of the important data. We assume no responsibility for the
data loss.
●This manual has been carefully checked. Please contact our service center when
any typing mistake is found.
●Please read the operang instrucon carefully and use the accessories only
provided by the original factory to avoid any unexpected damage. No warranty will
be executed if you are not following the instrucon or connecng with the
incompable accessories, we assume no responsibility for any loss and damage
caused hereby.
●Users can update and upgrade soware from website at his/her opon.
●Any discrepancy between the pictures with real products hereinaer, the real one
prevails.
The packing box contains the following accessories, please confirm:
Rearview mirror monitor
wire rod
User's manual
wire cover
remote control(opon)
For the items listed above, please confirm the actual products. If any damage,
Please contact with the distributor or the agent as soon as possible.
1.1 Package
Back up camera display
Automacally brightness adjustment
4.0mm glass and 23mm car factory OEM bracket
Adjustable guide line (opon)
Compass and temperature (opon)
Parking sensor (opon)
Manual dimming (opon)
Auto dimming (opon)
1.2 Features
φ
ksize.ru
4
3
BK-043LA
AK-035LA / EK-035LA
AK-043LA / EK-043LA
The V1/V2 button can switch the 2 video signal input, Press
it can switch back and forth between the two video signals.
Up
1.Press the menu, which can adjust the brightness,
contrast, color saturation of the screen. All the default
parameters is 50, you can adjust the parameters through
the up and down buttons according to your preference.
2.Continue to press the MENU button, it can set the
ANGLE(Every country has a specific number),
o
o
CALIBRATION(AUTO/OFF), TEMP UNIT ( C/ F),
SCALE(ON/OFF: it can use remote control to adjust),
LANGUAGE(You can choose the language what you need:
English, Spanish, Portuguese, Italian, French, German,
Dutch, etc.)
3.Select the “RESET” and press UP/DOWN can back to
factory default settings.
Down
Turn on/off the screen
The menu tabs will automatically be hidden in 10seconds and lighted up again as
soon as you press the touch buttons
5
7
12 3 4
V1/V2
MENU
1
5
6
7
8
9
V1/V2
MENU
1
5
6
7
8
9
6
8
9
No. Descrion
1
2
3.5/4.3 ultra high brightness display screen
Light sensor
4
Mirror without auto-dimming funcon: When the screen
turns off or doesn't have video signal, the indicator light will
light up, conversely, it turns off .
Mirror with auto-dimming funcon: when the auto-dimming
acvates, the indicator light will become light; conversely,
it will turn off.
3
Mirror without auto-dimming funcon:
video input: turn on/off the screen
camera input: adjust the brightness of the screen image
Mirror with auto-dimming funcon:
Video input: short press to turn on/off auto-dimming
long press to turn on/off the screen.
camera input: adjust brightness of the screen image
Product intruction
Installation and wire
Basic functionsoptional functions
Keyboard
Chapter two: Installation and wire
2.1 Keyboard
1378 6 HK-043LA
DK-043LA
ksize.ru
2.2.1 Remove the original mirror
1
Different cars have different brackets. It depends on your vehicle maker and
manufacturer.
There are many methods to remove the original rear-view mirror, however ,please
don’t force the mirror off the bracket.
The manufacturer will not be responsible for damage caused to your vehicle as a
result of installation of this mirror monitor.
1
5
3
4 6
2
2.2.2 Install high brightness mirror monitor on the base
6
5
Product intruction
Installation and wire
Basic functionsoptional functions
Installation
2.2 How to install high brightness mirror monitor
1
We have many kinds of brackets. one of them must suit for your car, and we are
not going to go through anymore examples, because the space is limited.
If you don’t find the same bracket here as your car, please contact us.
Rearview mirror monitor
1BAM 2XX
camera License Plate
General installation location
When a camera needs to be installed at the rear of vehicle, a good position is
usually at the top of the License plate where there is an under ledge.
2.3 Special bracket
2.4 How to Install Reverse Camera ( Option Not included )
2
ksize.ru
After the mirror is mounted, you need to run the cable along the roof lining and
down the pillar so you can connect to Power and the rear view camera
13
5
7
8
2
4
6
Video in
Green to back
5
6
7
8
9
3
Camera(Not Included)
8
9
23
4
6
8
57
7
3
rearview mirror monitor
mirror monitor cable
Car camera extension cable
3
1
5
9
camera (not included)
9
3
4
6
8
7
Product intruction
Installation and wire
Basic functionsoptional functions
Installation
8
5 5 55
78
2.5 How to wire
ksize.ru
When the car is in reverse, the monitor will automacally display backup camera.
in reverse
not in reverse
automacally display
9
The thickness of our mirror’s glass is 4mm. It is strong enough to bear impact
and reach every countrys safety standards on rearview mirror
4.0mm
OEM bracket for special rearview mirror monitor with 23mm-thickness pipe.
23mm
φ
The brightness of screen varies with ambient light, thereby, to make driver
get a clear and comfortable image when reversing.
Product intruction
Installation and wire
Basic functionsoptional functions
10
Basic functions
Clear back up view displayed on high-reflectance mirror.
high-reflectance mirror normal-reflectance mirror
Chapter Three: Basic functions
3.1 High reflectance mirror
3.2 Back up camera dispaly
3.3 The brightness of screen automatically adjusts
3.4 Glass and bracket
A perfect reflecon monitor
Top grede Mirror
Budget grade Mirrors
Strong lightWeak light
Strong lightWeak light
ksize.ru
Generally, to help drivers estimate the distance from obstacles, there are
three lines for reference -red, yellow and green. Those three lines are
displayed on the monitor when car is reversing. The green line is 3m from the
back of car and the yellow line is 2m. The distant red line is 1m from the
backside of car while the closed red line is 0.4m. Both reference lines on the
left and right should leave 0.2m space from the car.
20C M20C M
4.1.3 How to adjust the guide line
According to the site of standard reference line, we can put reference objects
such as desks in the back area of car. Compared with the marked reference
objects, we can adjust the sites and angle of two guide lines displayed on the
monitor. You will get the accurate and safety guide lines once they coincide with
the reference objects.
Long press seng buon is to enter into “guide line adjustment” mode. The
upper half of the remote is to adjust le guide line while the boom half of the
remote is to adjust the right one. The up, down, le and right buons are to
adjust the locaon of guide lines. The clockwise rotaon contra rotaon buons
are to adjust the angle of guide lines. It is easy to operate and calibrate.
4.1.1 About guide line
Regular guide line is fixed. But installation sites of cameras are different as
well as car size. The fixed guide line is not accurate enough for drivers. There
will be a great difference between regular and fixed guide lines and car's
real guide lines, especially when camera is mounted on the left or right side
of car backside. It may cause accidents.
4.1.2 What the regular guide line is
Product intruction
Installation and wire
Basic functionsoptional functions
1211
Adjustable guide line (option)
Chapter Four: Optional functions
4.1 Adjustable guide line
L R
Display on the monitor
POWER
LEF T
RIGHT
Check Surrounding for safety
Long press to set guide line
M E N U U P
R E C
DOWNMODE
Use the buons move and
rotaon the leguide line
Use the buons move and
rotaon the right guide line
Wrong posion
Right posion
ksize.ru
V1/V2
MENU
This compass can be calibrated by driving your vehicle in several complete
circles. A quick guide is stated as below. If the vehicle's compass headings
become inaccurate, the compass can be manually calibrated by:
4.2.1 Digital Compass Calibration(BK-043LA / DK-043LA)
2. Press enter into the “CALIBR AT ION, the default mode is “OFF,
press , select the “AU TO” 4-2-2
3. Drive your vehicle in at least 2 circles' counterclockwise, allowing 45
seconds to complete one circle
4. For best calibration, keep your circle radius close to 5 meters and
speed less than 10km/h.4-2-3
MAGNETIC ANGLE
0
MENU
MAGNETIC ANGLE 0
4-2-1
1.Press the enter into “MAGNETIC ANGLE, and press
button to choose the appropriate magnetic declination4-2-1.
(Using the map 4-2 in the page18 to find your geographic location, note the
zone that you are located)
MENU
MENU
R>5M
5. Press enter into the “CALIBR AT ION, press ,
select the “OF F” 4-2-4
MENU
4-2-3
2 circles
speed<10km/h
counterclockwise
Product intruction
Installation and wire
Basic functionsoptional functions
1413
4.2 Compass
CA L IBR ATI O N
AU TO
CALIBRATION
AUTO
V1/V2
MENU MENU
4-2-2
CA L IBR ATI O N
OF F
CALIBRATION
OFF
V1/V2
MENU MENU
4-2-4
Compass (option)
ksize.ru
2. Press to select the “CALI BRATION”, the default mode is “OFF,
press , select the “AU TO” 4-2-2-2
4.2.2 Digital Compass Calibration(AK-035LA AK-043LA
EK-035LA EK-043LA)
This compass can be calibrated by driving your vehicle in several complete
circles. A quick guide is stated as below. If the vehicle's compass headings
become inaccurate, the compass can be manually calibrated by:
1.Press the three times enter into “SE T TING” menu, and press
button to choose the “ANGLE”. you can press to adjust the angle.
4-2-2-1 (Using the map 4-2 in the page18 ) to find your geographic location,
note the zone that you are located)
4-2-2-1
3. Drive your vehicle in at least 2 circles' counterclockwise, allowing 45
seconds to complete one circle
4. For best calibration, keep your circle radius close to 5 meters and
speed less than 10km/h.4-2-2-3
R>5M
4-2-2-3
2 circles
speed<10km/h
counterclockwise
5. Press to select the “CALI BRATION”, press , select the
OFF” 4-2-2-4
Product intruction
Installation and wire
Basic functionsoptional functions
1615
Compass (option)
4.2 Compass
SE T TI NG
ANGL E
CAL IBR ATION
FRON T S ENSRO
BACK SE N SOR
TEMP U N IT
00
OFF
01
01
oF
ANGLE 00
SE T TI NG
ANGL E
CAL IBR ATION
FRON T S ENSRO
BACK SE N SOR
TEMP U N IT
00
AUTO
01
01
oF
CALIBRATION
AUTO
4-2-2-2
SE T TI NG
ANGL E
CAL IBR ATION
FRON T S ENSRO
BACK SE N SOR
TEMP U N IT
00
OFF
01
01
oF
CALIBRATION
OFF
4-2-2-4
ksize.ru
4.3.1 How to set (BK / DK SERIALS)
Press the enter into “TEMP UNI T”, press , you can
o
o
switch F to C 4-3-1
MENU
4.3.2 How to set (AK / EK SERIALS)
1.Press the enter into “SETTINGmenu, and press button to
o
o
choose the “ TEMP U NIT.press you can switch F to C 4-3-2
SE T TIN G
ANGLE
CAL IBRATION
FRONT SENSRO
BACK SENSOR
TEMP UNIT
00
AUTO
01
01
oF
TEMP UNIT OC
4.3.3 Temperature sensor installation
Locate the temperature sensor between the front of the radiator and the
front bumper
Locate edge of sheet metal or plastic shield, and slide metal clip over edge
until secure.
Sensor should be in the flowing of fresh air. Do not locate it next to a
heated engine part.
Product intruction
Installation and wire
Basic functionsoptional functions
1817
Temperature (option)
4.3 Temperature
TEMP UNIT OC
TEMP UNIT OC
V1/V2
MENU MENU
4-3-1
4-3-2
12
14
16
18
22
26
24
12
14
16
18
22
24
26
28
34
44
54
66
2
4
6
8
-2
-4
-6
-8
-12
-14
-16
-18
-12
-14
-16
-2
-4
-6
-8
2
4
6
8
12
14
16
18
22
24
26
-2
-4
-6
-8
-12
-14
-16
-16
2
4
6
8
12
14
16
18
USA
CANADA
Brazil
Peru
Chile
Aryentina
RUSSIA
CHINA
South Africa AUSTRALIA
Brit ain
Franch
Spai n
Germany
swed en
印度
los Angeles A
-18
-22
-24
-26
-28
-32
-34
-36
-38
3-2-1-1
New York: -13
Oawa:-15
Sao Paulo:-20 Canberra: 12
BeiJing: -7
New Delhi:1
DuBai:2
Paris:0
Moscow: 10
Capetown: 16
Berlin: 4
Los angeles: 4
We do not recommend to use compass in the area where the
magnec lines of flux is intensive. For example, the north of Canada.
4-2
ksize.ru
4.4.1 How to wire
5
3
rearview mirror monitor
mirror monitor cable
extension cable
3
1
camera
13
5
7
11
2
4
6
10
5
9
9
10
8
8
11
parking sensor
Video in
PUSH OUT OPEN
ECU
3
2
4
567
11
9
8
10
Green to back
10
11
4.4.2 Two display styles
Top view display style
LMR display style
Product intruction
Installation and wire
Basic functionsoptional functions
2019
Parking sensor (option)
Mirror without auto-dimming funcon:
Video input: turn on/off the screen
Camera input: short press adjust the brightness of the screen image
long press to turn on/off the voice Bi...
Mirror with auto-dimming funcon:
Video input: short press to turn on/off auto-dimming
long press to turn on/off the screen.
Camera input: short press adjust the brightness of the screen image
long press to turn on/off the voice Bi...
Power buon
4.4 Parking sensor
ksize.ru
4.5.1 The buttons
Parking sensor (option)
4.5 Special for GM Onstar system and HYUNDAI Bluelink system
Product intruction
Installation and wire
Basic functionsoptional functions
2221
Special for GM On Star system
Special for HYUNDAI Blue link system
Video in
Green to back
5
6
7
8
9
3
Original Onstar or Bluelink connector
10
11
57
car camera extension cable
3
mirror monitor cable
5
79
camera (not included)
9
8
rearview mirror monitor
10
1
3
11
10
3
4.5.1 How to wire
Camera(Not Included)
8
9
23
4
6
8
3
4
6
5 5
78
Note: Onstar system and Bluelink system are the patent and trade mark
from GM and HYUNDAI car factories respecvely.
ksize.ru
4.6.1 Why need dimming function
● To protect drivers from night glare of headlight.
● It is a function that can improve the car safety level.
● It may cause a series of legal disputes once removed by car dealers or sellers
4.6.2 manual dimming
The interior rearview mirror will reflect the glare of rearward-approaching vehicles
and it shines to driver's eyes when driving at night, which would cause a serious
crisis. While the manual dimming rearview mirror comes with special glass and
rotating device, when the strong light comes from the back of the car, the driver
only needs to rotate it to another angle, that is, strong light will be reflect to
another area which ensures the safe driving at night.
mirror plane (high reflectance)
glass surface(low reflectance)
the reflectance of glass surface is much lower than mirror plane
4.6.3 Auto dimming
The auto-dimming of our mirror works automatically when you start the
engine, then the indicator light also lights. The light sensor in the back of the
rearview mirror will always detect the ambient light. The auto-dimming
doesn't work in the broad day for the adequate daylight. However, when night
falls and the ambient light is below 5lux, the auto-dimming starts to work and
automatically dims to eliminate the glare of rearward-approaching vehicles.
Furthermore, the degree of brightness of the auto-dimming glass depends on
the level of the light. The stronger the light from the back of the car is, the
darker the glass is. Hence it protects drivers from becoming dizzy and avoiding
car accident.
Auto-dimming bleaching state
mirror plane (high reflectance)
glass surface(low reflectance)
when driving car at daytime.
the image from the backside
car is the reflect image of the
mirror , which is the same
principle of cosmetic mirror.
when driving at night, there is strong
light from rearward-approaching
vehicles, the driver can rotate the
manual shank to another angle, that is,
strong light will be reflected to
another area . At this moment, the
image from backside car is the
reflectance of glass surface.
the light sensor from the back of
mirror detects the ambient light
front light sensor detects the light
from rearward-approaching vehicles.
manual-dimming working state
manual-dimming bleaching state
Product intruction
Installation and wire
Basic functionsoptional functions
2423
Dimming (option)
Auto-dimming working state
4.6 Dimming Functions
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Kromtek AK-035LA User manual

Type
User manual
This manual is also suitable for

The Kromtek AK-035LA is a 3.5-inch ultra-high brightness rearview mirror monitor with a variety of features to enhance your driving experience:

High-Reflectance Mirror: Provides a clear and comfortable view, even in strong light conditions.

Back-Up Camera Display: Automatically switches to display the rearview camera feed when the vehicle is in reverse.

Auto-Adjusting Screen Brightness: Adjusts the screen's brightness based on ambient light levels to ensure optimal visibility.

Adjustable Guide Lines: Customizable guide lines assist with distance estimation while reversing.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI