For more informaon visit www.hoselink.com.au or call 1300 900 617
Item 2491 | How to Use - Opon 1
Click-On Adapter Set
Step 1
Disconnect Spray Gun
with Fing from the
Hose End Connector.
Step 2
Screw the Click-on
Adapter to the supplied
Accessory Connector.
Step 3
Now plug in your Click-
on Adapter to your
preferred watering
accessory. Point and twist
to connect to the Hose
End Connector.
Unfortunately the Hoselink no-burst guarantee does not apply to the Click-on Adapter.
Turn over the page for a no-burst connection option.
For more informaon visit www.hoselink.com.au or call 1300 900 617
Item 2491 | How to Use - Opon 2
How to get a no-burst connection
Step 1
Many watering
accessories will allow
you to unscrew the
click-on style ng
as shown. However, if
the ng is glued or
molded, then you will
need to follow Opon
1 overleaf.
Step 2
Once removed, the
accessory will present
with a female thread
into which you can
screw the supplied
Accessory Connector.
Step 3
Aach the Accessory
Connector to the
Hose End Connector
for a beer no-burst
connecon.
Happily, this ensures a no-burst connection!
-
1
-
2
