Hoselink 3560-CH User manual

Brand: Hoselink

Model: 3560-CH

Type: User manual

Hoselink 3560-CH is a sturdy metal hose reel box that simplifies garden watering tasks with convenient storage for your hose and accessories. This durable hose reel has four sturdy legs that keep it stable during use and can be positioned to face forward, backward, or downward, depending on your preference. The water inlet system can be installed on either side of the unit, adding to its versatility. Its crank handle allows for easy winding and unwinding of the hose. Explore hoselink.com.au or call 1300 900 617 for more information.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

Metal Hose Reel Box

User Manual

MODEL: 3560-CH - 3561-CH

User Manual KIT CONTENTS

1 1 x Crank Handle

1 x Crank Screw

2 1 x Leader Hose with Tap and

Hose Connectors attached

3 1 x Water Inlet System with

Hoselink Connector

4 4x Legs

4 x Leg screws

5 1 x Hose Reel Box

1 x Accessory Connector

1 x 8-Pattern Flow Control Sprayer

1 x Hose Clamp

( ITEM 3561-CH also includes: 1 x 30m Hose)

Tools Required:

Phillips Head Screwdriver

For more information visit hoselink.com.au or call 1300 900 617

ASSEMBLY INSTRUCTIONS

STEP ONE:

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink Hose Fittings,

legs and leg screws.

STEP TWO:

CAUTION

Be careful not to scratch the unit during this step.

While holding the lid closed,

rotate the Hose Reel Box upside

down and place on a clean, soft

working surface. With the open

sides of the legs facing inward,

attach a leg to each corner with

the supplied screws. Return the

Hose Reel Box to its normal

standing position.

STEP THREE:

Install the Crank Handle on

the right-hand side of the

Hose Reel Box, using the

supplied crank screw.

STEP FOUR:

Install the Water Inlet System on the

left-hand side of the unit. This can be

positioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch down ( located

on the underside of the

water inlet on the side

of the Hose Reel Box ),

insert inlet in the desired

orientation and lock by pushing

the latch back into place.

STEP FIVE:

If not already attached, screw

on the included Universal Tap

Connector with black reducer

to the end of the water inlet.

Connect the end of the Leader

Hose to the Tap Connector. Ensure

it is tight to prevent leaking.

STEP SIX

(for model 3561-CH, Metal Hose Reel Box with 30m Hose):

To pull the end of the hose through the hose guide you will

need to undo the end ﬁtting. First, unscrew the nut at the

back of the ﬁtting. Once undone, pull the ﬂow control ﬁtting

off the hose and slide the hose through the hose guide. Push

the Flow Control Fitting back onto the end of the hose and

tighten the nut.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Kit contents

Assembly Instructions

Step 1

Open Hose Reel Box cover

and remove the parts box

containing: crank with screw,

leader hose, water inlet

system, Hoselink hose ngs,

legs and leg screws.

Step 3

Install the Crank Handle on the

right hand side of the Hose Reel

Box, using the supplied Crank

Screw.

Step 2

While holding the lid closed,

rotate the Hose Reel Box

upside down and place on a

clean, so working surface.

With the open sides of the

legs facing inward, aach a leg

to each corner with a screw.

Return the Hose Reel Box to its

normal standing posion.

Be careful not to scratch the unit during this step.

CAUTION

1 1x Crank Handle

1x Crank Screw

2 1x Leader Hose with Tap and

Hose Connectors aached

3 1x Water Inlet System with

Hoselink connector

4 4x Legs

4x Leg screws

5 1x Hose Reel Box

1x Premium Metal Spray Gun

1x Accessory Connector with Swivel

1x Hose Clamp

(ITEM 3561 also includes: 1x 30m Hose)

Tools Required:

Phillips Head Screwdriver

Step 4

Install the Water Inlet System on the

le hand side of the unit. This can be

posioned to face forward, backward

or downward. To install the Water Inlet

System, pull the latch

down (located on the

underside of the water

inlet on the side of the

Hose Reel Box), insert in

the desired orientaon and lock

by pushing the latch back into place.

Step 5

Connect the end of the Leader Hose

to the Water Inlet System. Ensure it

is ght to prevent leaking.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Hose Installation (If installing your own hose)

Storage tips

Step 1

Verify that the hose guide

is lined up with the water

outlet inside the Hose Reel

Box. If necessary, rotate

the crank handle unl the

hose guide is aligned with

the water system outlet on

the le side of the unit as

shown.

Before rewinding the hose: turn water o at the tap and

squeeze the trigger to release pressure from inside the

hose. Turn the handle clockwise to reel the hose in.

If possible, the unit is best stored in a shaded area.

Drain water from unit to prevent damage from freezing.

Step 2

Uncoil the garden hose to be

installed and insert through

the hose guide. Place the

included hose clamp over

the hose. Push the hose onto

the coupling. Align the hose

clamp over the hose and

coupling and ghten.

Step 4

Screw the Hoselink Tap Connector

onto the tap. Connect the end of

the Leader Hose to the Tap.

Step 3

Close the cover and wind the hose back into the box by

turning the Crank Handle clockwise. Follow the supplied

Hoselink Fing Instrucons to t the supplied Hoselink

Hose Connector to the end of the hose.

Do not over-ghten the hose clamp.

CAUTION

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

youtube.com/hoselink

Cultivating Connections

Metal Hose Reel Box

User Manual

MODEL: 3560-CH - 3561-CH

HOSE INSTALLATION

(IF INSTALLING YOUR OWN HOSE)

STEP ONE:

Verify that the hose guide is

lined up with the water outlet

inside the Hose Reel Box.

If necessary, rotate the crank

handle until the hose guide is

aligned with the water system

outlet on the left side of the

unit, as shown in the diagram.

STEP TWO:

Uncoil the garden hose to be

installed and insert through

the hose guide. Place the

included hose clamp over

the end of the hose. Push

the hose onto the water

outlet stem inside the box

and tighten the clamp.

CAUTION

Do not over-tighten the hose clamp

STEP THREE:

Close the cover and wind the hose into the box by

turning the crank handle clockwise. Follow the supplied

Hoselink Fitting Instructions to ﬁt the supplied Hoselink

Hose Connector to the end of the hose.

STEP FOUR:

Screw the Hoselink Tap

Connector onto the tap.

Connect the end of the

Leader Hose to the Tap Fitting.

HOSE INSTALLATION

Before rewinding the hose: Turn water off at the tap

and squeeze the trigger to release pressure from inside

the hose. Turn the handle clockwise to reel the hose in.

If possible, the unit is best stored in a shaded area.

Drain water from the unit to prevent damage from freezing.

For more informaon visit www.hoselink.com.au or call 1300 900 617

Hose Installation (If installing your own hose)

Storage tips

Step 1

Verify that the hose guide

is lined up with the water

outlet inside the Hose Reel

Box. If necessary, rotate

the crank handle unl the

hose guide is aligned with

the water system outlet on

the le side of the unit as

shown.

Before rewinding the hose: turn water o at the tap and

squeeze the trigger to release pressure from inside the

hose. Turn the handle clockwise to reel the hose in.

If possible, the unit is best stored in a shaded area.

Drain water from unit to prevent damage from freezing.

Step 2

Uncoil the garden hose to be

installed and insert through

the hose guide. Place the

included hose clamp over

the hose. Push the hose onto

the coupling. Align the hose

clamp over the hose and

coupling and ghten.

Step 4

Screw the Hoselink Tap Connector

onto the tap. Connect the end of

the Leader Hose to the Tap.

Step 3

Close the cover and wind the hose back into the box by

turning the Crank Handle clockwise. Follow the supplied

Hoselink Fing Instrucons to t the supplied Hoselink

Hose Connector to the end of the hose.

Do not over-ghten the hose clamp.

CAUTION

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

For more informaon visit www.hoselink.com.au or call 1300 900 617

Hose Installation (If installing your own hose)

Storage tips

Step 1

Verify that the hose guide

is lined up with the water

outlet inside the Hose Reel

Box. If necessary, rotate

the crank handle unl the

hose guide is aligned with

the water system outlet on

the le side of the unit as

shown.

Before rewinding the hose: turn water o at the tap and

squeeze the trigger to release pressure from inside the

hose. Turn the handle clockwise to reel the hose in.

If possible, the unit is best stored in a shaded area.

Drain water from unit to prevent damage from freezing.

Step 2

Uncoil the garden hose to be

installed and insert through

the hose guide. Place the

included hose clamp over

the hose. Push the hose onto

the coupling. Align the hose

clamp over the hose and

coupling and ghten.

Step 4

Screw the Hoselink Tap Connector

onto the tap. Connect the end of

the Leader Hose to the Tap.

Step 3

Close the cover and wind the hose back into the box by

turning the Crank Handle clockwise. Follow the supplied

Hoselink Fing Instrucons to t the supplied Hoselink

Hose Connector to the end of the hose.

Do not over-ghten the hose clamp.

CAUTION

Assembly guide

Metal Hose Reel Box

Item: 3560 - 3561

Hoselink 3560-CH User manual

Hoselink 3560-CH User manual

Hoselink 3560-CH User manual

Related papers

Other documents