Page is loading ...
Ins-30006 TOUCHLOCK K series stainless steel keypad
Fitting
12/07/2006
Technical Support
Technical help is available Monday - Friday from 07:00 - 19:00.
Other documentation on Net2 can be found on our web site - http://www.paxton-access.co.uk/
+44 (0)845 8381716 [email protected].uk
Suitability
Security sensitive doors
Mounted on metal surface
Wet environments
Wiring
The keypads in the K series range, including the stainless steel and KP versions, can only be used with Switch2
controllers fitted with yellow wiring labels. Earlier versions of the Switch2 are incompatible with these products.
Cable extensions
Readers can be extended using Belden CR9540 10-core overall screened cable. The maximum cable length
between reader and control unit is 100m.
Serial number
241821
Test ID: 012345678901
z-1440
123
456
789
0#
*
witch
2
S
CAUTION
123
456
789
0#
*
When using the K series keypads with Net2 the software version used must be v3.21 or later. Before this version
the K series keypads were not supported by Net2.
Serial number
241821
Test ID: 012345678901
z-1440
123
456
789
0#
*
Screw connector
/