Poly Deluxe Adirondack Chair
Assembly Instructions
A. B.
C.
D.
Base Parts List
2 - (A) Armrest Assembly
1 - (B) Seat Assembly
1 - (C) Back Assembly
2 - (D) Back Legs
4 - ⁄" x 3⁄" Bolts
2 - ⁄" x 3" Bolts
2 - ⁄" x 2⁄" Bolts
8 - Nuts
16 - Washers
10 - 2" Screws
Hardware List
INSTRUCTIONS: *Always match numbers/letters printed on each individual piece. (1 to 1, 2 to 2, A to A, B to B, etc.)
Step 1 - Fasten
armrest assembly to
seat assembly with
two 3⁄" bolts, four
washers, and two nuts.
Repeat with other
armrest.
Step 2 - Fasten back
legs to seat assembly
with slanted side up.
Use a 3” bolt, two
washers, and a nut on
each leg.
Position back and seat
assembly to prepare
for Step 2.
Washer
Put two nuts and
two washers on
bottom.
Step 3 - Fasten back
legs to armrests with a
2⁄" bolt, two washers,
and a nut.
Armrest
Back Leg
Step 4 - Fasten back
legs to armrests with a
2" screw in each leg.
continued on back
0 1 2 3 4 5 6 7
INCH
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com