Renkforce Passive PA speaker 10 " PA 102 150 W 1 pc(s) Owner's manual

Brand: Renkforce

Model: Passive PA speaker 10 " PA 102 150 W 1 pc(s)

Category: Soundbar speakers

Type: Owner's manual

This manual is also suitable for

inch;;PA122Premium

Page is loading ...

Installation

Do not place your PA Box directly near displays such as TV sets or computer monitors.

The magnetic ﬁeld from the loudspeakers might distort the image on such devices.

When setting up the PA Box, make sure that the loudspeakers have a stable footing

and that the surface they rest on is stable.

If you install the PA box in an elevated position or stack boxes on top of one another,

the boxes must be secured with suitable securing devices. When so doing, ensure

that the fastening material and the anchoring area are sufﬁciently dimensioned.

Serious injury to persons can be caused if the PA Box falls down. Therefore, securing

the PA-Box must be done by experienced and trained personnel.

It is not permitted to suspend the loudspeakers from the carrier handles.

If the PA box is set up on a stand, it must be robust enough and appropriate for the

weight of the loudspeaker.

Always route the cables so that nobody can trip over or become entangled in them.

There is a risk of injury.

• Locate the PA box in a desired location.

• If necessary, a loudspeaker stand can be inserted in the loudspeaker ﬂange underneath the box.

• Align the sound outlet as desired.

Connection

When connecting the PA box, ensure that the connecting cable is not pinched or dam-

aged by sharp edges.

The loudspeakers may only be connected to suitable loudspeaker outputs of audio

devices.

Make sure that impedance and power rating speciﬁed in the technical data resonate

with the connected ampliﬁer’s data. Otherwise the PA-Box or the ampliﬁer may be

damaged.

The power ampliﬁer to which the PA loudspeaker is connected must be switched off

during the connection process.

Do not route the connecting cable in such a way that people may trip over it

• Connect the SPK plug INPUT of the PA Box to the ampliﬁer’s loudspeaker output. If the ampliﬁer

does not have a suitable connection, please use suitable adapter cables.

Pin assignment: Positive pole Pin1+

Negative pole Pin1-

• If you want to connect another speaker parallel to the same ampliﬁer channel, connect the free

SPK plug OUTPUT with that loudspeaker. Both connections are wired in parallel. The connection

OUTPUT is not inﬂuenced by the built-in diplexer.

• Pay attention to the loading capacity of the terminal element . The total impedance of the con-

nected loudspeakers should be less than the minimum impedance of the power ampliﬁer.

Maintenance

The PA box does not require any maintenance.

Only wipe the outside with a dry or slightly moistened cloth. Make sure not to touch the sensitive

speaker membranes.

Never use aggressive cleaning agents or chemical solutions as the housing’s surfaces or the loud-

speaker membrane could be damaged.

Disposal

Electronic devices are recyclable waste materials and must not be disposed of in the

household waste!

Please dispose of the product, when it is no longer of use, according to the current

statutory requirements.

Technical Data

...................................................... PA102 PA122 PA152

Power rating (RMS/max.) ........ 150/300 W 200/600 W 280/700 W

Frequency range .......................55-20000 Hz 40-20000 Hz 30-20000 Hz

Impedance ................................. 8 Ohm 8 Ohm 8 Ohm

Sound pressure .........................101 dB 95 dB 96 dB

Dimensions................................. 310 x 500 x 310 mm 360 x 620 x 360 mm 440 x 800 x 440 mm

Weight ......................................... 12 kg 17 kg 25 kg

Operating instructions

PA Box

PA102 item no. 1306872

PA122 item no. 1306914

PA152 item no. 1306915

Intended use

The PA-Box is used to convert the electric output signals from audio ampliﬁers into audible sound

waves and is only intended for connection to the loudspeaker outputs of such devices.

The product may only be used in enclosed indoor locations. Outdoor use is not allowed. Do not

expose to moisture, for example in bathrooms or similar spaces.

Any other use than the one described above may lead to damage to the PA-Box and involves other

risks, such as short circuits, ﬁre or electrical shocks etc.

No part of the product may be modiﬁed or rebuilt.

This product complies with the applicable national and European regulations. All company and

Observe all the safety instructions in these operating instructions.

Package contents

• PA Box

• Operating instructions

Explanation of symbols

The exclamation mark indicates important information in these operating instructions.

Please read all the instructions before using these devices; they contain important in-

formation on its proper operation.

Safety instructions

Damage due to not following these operating instructions will void the warranty! We

do not assume any liability for any resulting damage!

We do not assume any liability for material and personal damage caused by improper

use or non-compliance with the safety instructions! In such cases, the warranty will

be null and void!

• For safety reasons, any unauthorised conversion and/or modiﬁcation to the product

is not permitted.

• When connecting the PA Box, the safety instructions of the device to which they are

connected must also be observed.

• Never pour liquids over electrical devices and never place objects ﬁlled with liquid

on top of them.

• Do not place sources of open ﬁre such as burning candles on the appliance.

• Do not store any magnetic storage media such as ﬂoppy disks, video tapes etc. in the

proximity of the PA box, as the magnetic ﬁeld from the loudspeaker may corrupt the

information stored on the storage media.

• Do not listen to excessively loud music for long periods of time. This may damage

your hearing.

• Do not expose the PA box to high temperatures, drips or water spray, strong vibra-

tions or high humidity.

• This product is not a toy; it is not suitable for children. Children are not aware of the

potential dangers involved when using electrical devices.

• Don’t leave packaging material lying around carelessly; it may become a dangerous

plaything for children.

• If you are unsure about how to connect the product properly, or should you have any

questions that are not answered in these operating instructions, please contact our

technical service or consult a professional.

• Moreover, please observe the additional safety instructions contained in the indi-

vidual chapters of these operating instructions.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

Page is loading ...

Renkforce Passive PA speaker 10 " PA 102 150 W 1 pc(s) Owner's manual

Brand: Renkforce

Model: Passive PA speaker 10 " PA 102 150 W 1 pc(s)

Category: Soundbar speakers

Type: Owner's manual

This manual is also suitable for

inch;;PA122Premium

Download PDF

report

Renkforce Passive PA speaker 10 " PA 102 150 W 1 pc(s) Owner's manual

This manual is also suitable for

Renkforce Passive PA speaker 10 " PA 102 150 W 1 pc(s) Owner's manual

in other languages

Related papers

Other documents