PRASTEL EASY-DT User guide

Brand: PRASTEL

Model: EASY-DT

Type: User guide

PRASTEL EASY-DT is a versatile access control system that provides secure and convenient entry to your property. With its ability to store up to 1000 user codes and cards, it offers a flexible and scalable solution for a wide range of applications. The built-in proximity reader allows for quick and easy user identification, while the two relay outputs enable control of various devices such as gates, doors, and lights. The device's robust design and IP66 rating make it suitable for both indoor and outdoor use, ensuring reliable operation in harsh environments.

EASY-DT : SIMPLIFIED USERGUIDE ISEASY-DT_EN_09_18.pdf

= Proximity reading and

programming zone

Technical overview:

Power supply: 12-24 VAC or VDC

Average Work consumption: < 30mA

Rest consumption: < 160mA

Frequency: EM125KHz

Number of relay output: 2

Working conditions: -30°C - +70

IP66

Size / Weight: 76 X 120 X 22

Wiring diagram:

POWER

SUPPLY

Black / - = GND

} 12-24 VAC or VDC

Red /+ = +

RELA

Y 1

Pink / COM 1 = Common 1

} NO1

White / NO 1 = NO contact 1

Pink / COM 1 = Common 1

} NC1

Aqua / NC 1 = NC contact 1

RELA

Y 2

Purple / COM 2 = Common 2

} NO2

Blue/ NO 2 = NO contact 2

Purple / COM 2 = Common 2

} NC2

Grey / NC 2 = NC contact 2

Enter the setting

mode

Input the master code twice.

(default code : 1234)

Quit the setting

mode

Press the button twice.

Modify

administrator code

Enter the setting mode .

Select menu 3 by pressing :

Input the new 4-digit admin code twice.

Quit the setting mode .

Relay 1 add user

card and code

Enter the setting mode .

Input memory rank number 000 to 999 (3 digits)

Free rank

Occupied rank

Input the user card/code for the Relay 1

(4 digits by default)

Quit the setting mode .

Relay 1 activation

time

Enter the setting mode .

 Select menu 1 by pressing :

 Input the delay time in seconds from 00 to 99

(2 digits)

Quit the setting mode .

Relay 2 add user

card and code

Enter the setting mode .

 Select menu 4 by pressing :

Input memory rank from 00 to 09 (2-digits) :

Free rank

Occupied rank

 Input the user card/code for the Relay 2

(4 digits by default)

Quit the setting mode .

Relay 2 activation

time

Enter the setting mode .

 Select menu 5 by pressing :

Input the delay time in seconds from 00 to 99

(2 digits)

Quit the setting mode .

Delete one user card

and code

If a memory rank is occupied: Enter setting mode :

 Input memory rank:

Relay1: from 000 to 999

(3-digits) :

Relay2: from 00 to 09

(2-digits) :

 Erase the rank by pressing twice ::

x 2

Clean all user cards

and codes & restores

to factory defaults

Input admin code twice :

 Select menu 8 by pressing :

Press the button 9 twice :

x 2

Reset administrator

code

Shut off the power supply.

Turn on the power while pressing :

Keep pressing the button until it make a sound.

Legend: = 1 short beep; = 1 long beep; = flashing orange

PRASTEL EASY-DT User guide

PRASTEL EASY-DT User guide

PRASTEL EASY-DT User guide

Other documents