Epson Moverio BT-35ES User guide

Brand: Epson

Model: Moverio BT-35ES

Type: User guide

This manual is also suitable for

Moverio BT-35E

User's Guide

CPD-55906R1

Information on the Moverio Website

Provides technical information.

https://tech.moverio.epson.com/en/bt-35e/

Contents

Safety Instructions ...............................4

Notes on Usage ..................................8

Included Items ...................................9

Part Names and Functions ......................10

Interface Unit ....................................... 10

Headset ............................................. 11

Connecting the Interface Unit

and External Devices ............................12

Inputs and Outputs ................................. 12

Connecting by HDMI ................................ 13

Connecting by USB Type-C .......................... 14

Turning On/Displaying Images ..................16

Standby Mode and AV Mute ......................... 17

Extended Features ..............................18

Wearing the Headset ............................20

Wearing over Glasses ................................ 21

Using the Shade ..................................... 21

Using the Belt Clip/Cable Retainer ...............22

Replacing the Parts .............................24

Attaching and Removing the Shield ................. 24

Replacing the Temple Grip .......................... 25

Replacing the Nose Pads ............................ 26

Supported Equipment and Software .............27

Updating the Firmware ..........................28

Maintenance ....................................29

Troubleshooting ................................30

Specifications ...................................31

Product Specifications ............................... 31

Video Input ......................................... 32

Power ............................................... 32

Intellectual Property Rights. . . . . . . . . . . . . . . . . . . . . .33

General Notes ..................................34

List of Safety Symbols ............................... 36

Contact List .....................................38

User's Guide Organization

User's Guide

This guide provides information on safely using this product, basic operating methods, and trouble-

shooting. Make sure you read this guide before using the product.

Start Guide

Explains procedures for using this product for the first time.

Symbols Used in this Guide



Warning

This symbol indicates information that, if

ignored, could possibly result in serious

personal injury or even death due to incor-

rect handling.

Caution

This symbol indicates information

that, if ignored, could possibly result

in personal injury or physical damage

due to incorrect handling.



Indicates procedures which may result in

damage or injury if sufficient care is not

taken.

Indicates additional information and

points which may be useful to know

regarding a topic.

[ ]

Indicates buttons and keys on the interface

unit.

➡

Indicates a reference to related top-

ics.

01_Chapter title

01_Head A

02__lead

Do not touch the plug during a thunderstorm. Failure to comply

with these precautions could result in fire or electric shock.

Do not leave this product in locations subject to temperatures be-

yond the specified operating range, such as cars with the windows

closed, in direct sunlight, or in front of air-conditioning or heater

outlets. Also, avoid locations subject to sudden changes in tempera-

ture. Doing so may result in fire, breakdown, malfunction, or failure.

This product is not waterproof. Do not touch the AC adapter or the

connectors and cables for each of the connector ports with wet

hands. Failure to comply with these precautions could result in fire,

burns, or electric shock.

Do not use the product in locations where it may get wet or is sub-

ject to high levels of humidity such as in a bath or shower. Failure to

comply with these precautions could result in fire or electric shock.

Do not place this product in locations subject to smoke, steam, high

humidity, or dust such as kitchen counters or near humidifiers. Do-

ing so may result in fire, electric shock, or deterioration in image

quality.

Do not cover this product with a cloth or similar material during use.

Doing so may change the shape of the case through heat, or fire.

Do not touch the interface unit for too long while it is operating.

Doing so may result in low temperature burns if it is in contact with

your skin for too long, even if it is in a pocket or over clothing.

Do not expose the camera lens to direct sunlight for a long time.

Doing so may result in fire or explosion due to condensed beams

of light from the lens.

For your safety, read the attached documents carefully to use the product

correctly. After you have read the documents, keep them in a safe place so

that you can refer to them quickly at a later date.

Warning Usage environment and condition

precautions

Only use this product at the stated power-supply voltage.

Only use the AC adapter and dedicated micro-USB power supply

cable supplied with the product. Using other power supply devices

could result in heat, fire, explosion, malfunction, or liquid leakage.

Take the following precautions when handling the AC adapter. Fail-

ure to comply with these precautions could result in fire or electric

shock.

• Do not plug the AC adapter into an outlet being used by many

other devices.

• Do not insert the AC adapter into a dusty outlet.

• Insert the AC adapter firmly into the outlet.

• Do not hold the plug with wet hands.

• Do not cover or wrap the AC adapter in a cloth and so on.

• Do not use near a fire, stove, or electric heater.

Do not use the AC adapter, dedicated micro-USB power supply

cable, or any USB Type-C cable if they are damaged. Failure to

comply with these precautions could result in fire or electric shock.

For your safety, unplug the power supply cable when not using this

product. The insulation may deteriorate, which may result in electric

shock, fire, or malfunction.

Safety Instructions

personnel. Also, do not disassemble or remodel the product (in-

cluding consumable items). Many of the parts inside the product

carry a high voltage and could cause fire, electric shock, accident,

or poisoning.

Do not subject the lens of the product to strong shocks or knock

it against hard objects. If the lens is damaged, it could splinter and

cause serious injuries to the eyes and face.

Do not throw the product into a fire and do not heat the product.

Do not place objects with open flames, such as candles, on this

product. Doing so may result in heat, fire, or explosion.

 Warning Viewing image precautions

Do not wear this product while driving a car, riding a motor bike

or bicycle, or performing any other dangerous tasks. Doing so may

result in accident or injury.

Do not use this product in unstable locations such as stairs or at alti-

tude. Also, do not use the product while walking in dangerous loca-

tions such as near machinery or equipment that might get caught

on the cables, where there is a lot of traffic, or where it is dark. Doing

so may result in accident or injury.

When walking while viewing images on the product, be aware of

your surroundings. If you are too focused on the image, it could re-

sult in accidents, falling down, and colliding with other people.

When viewing in dark locations, it is difficult to see your surround-

ings due to the brightness of the image. Be aware of your surround-

ings.

 Warning Product usage precautions

Do not start using this product at a high volume. Doing so

may result in hearing impairment. Lower the volume before

turning off the product, and gradually increase the volume

after turning on the product. To prevent possible hearing

damage, do not listen at high volume for prolonged periods

of time.

Do not pull on the cable when inserting/removing it from the con-

nector for the connector ports. Also, make sure you plug the con-

nector straight into the connector port. If the connection is incom-

plete or incorrect, it could result in fire, burns, or electric shock.

Make sure you use genuine, certified products for cables connected

to the USB-C port or the HDMI port. Failure to comply with these

precautions could result in fire, burns, electric shock, or damage to

the product due to incorrect wiring and so on when not using certi-

fied products.

Do not allow any conductive foreign objects to touch the external

device connector or earphone microphone socket, and do not put

any conductive foreign objects into the connection ports. Doing so

may cause a short circuit and result in fire or electric shock.

Do not allow solvents such as alcohol, benzene, or thinner to touch

the product. Also, do not clean this product with a wet cloth or sol-

vents. Doing so may warp or crack the product housing and may

result in electric shock, malfunction, or fire.

The product housing should only be opened by qualified service

Safety Instructions

 Caution Usage environment and condition

precautions

Do not place the product in locations subjected to vibrations or

shocks.

While using the product to view images, play games, or listen to

music, make sure you confirm the safety of your surroundings and

do not leave any fragile items in your immediate vicinity. The images

you are viewing may cause you to move your body involuntarily,

resulting in damage to nearby items or personal injury.

Do not place this product near high-voltage lines or magnetized

items. Doing so may result in breakdown, malfunction, or failure.

When performing maintenance, make sure you unplug the power

supply cable and disconnect all wires. Otherwise, it may result in

electric shock.

 Caution Product usage precautions

Stop using this product if the skin that touches the product (face

and so on) feels itchy when wearing the product, or any unusual

rashes occur, and consult your local dermatologist.

If you sweat while using the product, wipe the sweat from your face

and the product. Continuing to use under these conditions may re-

sult in itching or a rash.

For your own safety, do not use a conversion adapter or extension

cable when using the USB-C port or the HDMI port.

When using this product in small locations, be aware of your sur-

roundings.

When wearing this product, do not look directly at the sun or other

light sources even if you are using the shaded shield. This could

cause serious injury to your eyes or loss of eyesight.

Make sure the cable does not catch on anything in the surrounding

area while wearing the product. Also, make sure the cable does not

wind around your neck. Doing so may result in accident or injury.

Make sure the cable does not get damaged. Otherwise, it may result

in fire or electric shock.

• Do not damage the cable.

• Do not place heavy objects on top of the cable.

• Do not bend, twist, or pull the cable with excessive force.

• Keep the power cable away from hot electrical appliances.

 Warning Product abnormality precautions

In the following situations, unplug the power supply cable, and

contact the Epson service call center. Continuing to use under

these conditions may result in fire or electric shock. Do not try to

repair this product yourself.

• If you see smoke, or notice any strange odors or noises.

• If any water, beverages, or foreign objects get into the product.

• If the product was dropped or the case was damaged.

Safety Instructions

Stop using this product if your skin feels unusual when wearing this

product and consult your local dermatologist. Sometimes allergies

may occur due to the coating or material of the product.

How a 3D image is perceived varies depending on the individual.

Stop using the 3D function if you feel strange or cannot see in 3D.

Continuing to view the 3D images could make you feel nauseous.

This product must not be used by children under the age of

thirteen.

Do not use this product if you are sensitive to light, or feel nauseous.

Doing so may aggravate your pre-existing conditions.

Do not use this product if you have prior eye conditions. Doing so

may aggravate the symptoms such as strabismus, amblyopia, or an-

isometropia.

Hold the interface unit securely or place it on a stable surface and

make sure the cables are not pulled with undue force.

Dispose of this product in accordance with your local laws and

regulations.

 Caution Viewing image precautions

Always take periodic breaks when viewing images using this prod-

uct. Long periods of viewing images may result in eye fatigue. If you

feel fatigued or uncomfortable even after taking a break, stop view-

ing immediately.

Do not drop this product or treat it with unnecessary force. Also, if

the product breaks due to an impact such as a fall, stop using the

product. Continuing to use this product may result in injury due to

glass fragments.

When wearing this product, be aware of the edges of the frame.

Also, do not place your finger between the moving parts of this

product. Doing so may result in injury.

Make sure you are wearing this product correctly. Incorrect usage

could make you feel nauseous.

This product should only be used for the purposes stated in the

manuals. Doing so may result in injury.

If a problem or malfunction occurs, stop using this product imme-

diately. Continuing to use this product may result in injury or could

make you feel nauseous.

01_Chapter title

01_Head A

02__lead

Notes on Usage

This product uses an Si-OLED display panel. Due to the characteris-

tics of the Si-OLED, you may notice burn-in or decreasing luminance

on the panel. This is not a malfunction.

To reduce the burn-in, do the following.

• Do not display the same image for a long time.

• Hide markers or text that always appear in the same position.

• Decrease the display brightness.

List of Safety Symbols (corresponding to IEC60950-1 A2)

The following table lists the meaning of the safety symbols labeled

on the equipment.

Approved standards: IEC60417 No.5031

Meaning: Direct current

To indicate on the rating plate that

the equipment is suitable for direct

current only; to identify relevant

terminals.

Caution Headset usage precautions

Do not drop this headset or treat it with unnecessary force.

The temples can only be opened outwards. Do not apply force in

other directions. If excessive force is applied to the temples, they

may be damaged.

When transporting the device, make sure you use the box that the

device came in and the dedicated carrying case so as not to apply

excessive force to the temples.

01_Chapter title

01_Head A

02__lead

Included Items

Headset

➡"Headset" p.11

Interface unit

➡"Interface Unit" p.10

AC adapter with plug attachment

➡"Inputs and Outputs" p.12

Dedicated micro-USB power

supply cable

➡"Inputs and Outputs" p.12

Clear and shaded safety shields

➡"Attaching and Removing the

Shield" p.24

Belt clip

Cable retainer

Installation screw

➡"Using the Belt Clip/Cable Re-

tainer" p.22

Carrying case

*Not waterproof.

01_Chapter title

01_Head A

02__lead

Part Names and Functions

Interface Unit

[ / ] (Brightness adjustment)

keys

Adjusts the brightness incrementally

within a range of 0 to 20. Hold the keys

down to increase or decrease the bright-

ness.

USB-C port

Connects to external devices

that support USB Type-C.

You can input video signals

and supply power from the

connected device. You can

also output camera data and

sensor data from the head-

set to the connected device.

➡"Connecting by USB Type-

C" p.14

HDMI port

Inputs video signals from video equip-

ment or computers that support HDMI.

➡"Connecting by HDMI" p.13

Micro-B port

This port is dedicated to supplying

power.

(It cannot be used for data communica-

tion.)

[ / ] (Volume) keys

Adjusts the volume incrementally within

a range of 0 to 15. Hold the keys down to

increase or decrease the volume.

[ ] (Standby) button

Set and release standby mode and AV

mute, and show/hide images.

➡"Standby Mode and AV Mute" p.17

LED indicator

Indicates the status of the product.

Orange: On Standby mode

Blue: Flashing No video signal detected

Blue: On Displaying images

Blue: Flashing

slowly

AV mute enabled

Orange: Flashing Error has occurred

Headset connector

Connects the headset.

➡"Connecting by HDMI" p.13

➡"Connecting by USB Type-C" p.14

Part Names and Functions

Headset

Nose pads

If the nose pads get dirty, it can be

replaced.

➡"Replacing the Nose Pads" p.26

Temples

Open the temples to wear.

➡"Wearing the Headset" p.20

Temple grip

If the temple grip gets dirty or deterio-

rates, it can be replaced.

➡"Replacing the Temple Grip" p.25

3.5 mm audio jack

You can connect commercially available

earphones and microphones.

➡"Wearing the Headset" p.20

Camera

Captures images and movies.

Remove the protective film before

use.

Interface unit connector

Inserts into the interface unit.

➡"Connecting by HDMI" p.13

➡"Connecting by USB Type-C" p.14

Safety shield (shaded shown)

ANSI Z87.1-compliant. Shaded

shield helps minimize ambient light.

➡"Attaching and Removing the

Shield" p.24

Ambient light sensor

Senses the brightness of your sur-

roundings and automatically ad-

justs the brightness of the screen.

01_Chapter title

01_Head A

02__lead

Connecting the Interface Unit and External Devices

Inputs and Outputs

The interface unit and external devices input/output the following data and power supply.

Port Name Input/Output

USB-C

• Outputs camera or sensor data.

• Inputs video signals.

• Supplies power.

HDMI Inputs video signals.

Micro-B

Only supplies power.

(Connects the AC adapter with the dedicated micro-USB power supply

cable.)

Camera/Sensor

Video signals

Power

USB Type-C cables and HDMI cables are not

supplied with this product. You need to obtain

your own in advance.

USB-C

HDMI

Micro-B

USB Type-C

Connecting the Interface Unit and External Devices

Connecting by HDMI

Follow the steps below to display images from external devices connected by HDMI.

A

Connect the headset.

B

Connect the external device.

C

Connect the power supply.

• Make sure you connect the headset before you connect the power

supply.

• Do not connect or disconnect the headset while it is operating.

• Make sure you unplug the dedicated micro-USB power supply cable

before unplugging the headset cable.

• HDMI cannot be connected using a conversion adapter.

• To prevent excessive wear on the connectors, do not disassemble

the AC adapter once it has been assembled.

When using the headset sensor or camera data, connect to the USB-C port. Video signals from the HDMI port have

priority over video signals from the USB-C port.

➡"When using the headset sensors or camera" p.15

HDMI

Micro-B

Connecting the Interface Unit and External Devices

Connecting by USB Type-C

A

Connect the headset.

B

Connect the external device.

• Make sure you connect the headset before you connect the power

supply.

• Do not connect or disconnect the headset while it is operating.

• Make sure you unplug the USB Type-C cable before unplugging the

headset cable.

• The connected equipment must support USB 2.0/3.0.

• Make sure you use a genuine USB-IF certified USB-C 3.1 cable.

• USB Type-C cannot be connected using a conversion adapter.

When connecting to an external device with USB Type-C, you can use data from the headset sensors and camera as well

as view the images. Also, since it can be used as a power supply source, you can perform three operations simultane-

ously using one USB Type-C cable; input video signals, output sensor/camera data, and supply power.

USB-C

Connecting the Interface Unit and External Devices

Notes on displaying images by USB Type-C

• This product supports DisplayPort Alternate mode (DP Alt

mode) for USB Type-C.

➡"Supported Equipment and Software" p.27

• To display images using USB Type-C, the connected device

must support video output by USB Type-C.

• Depending on the device, displaying images may not be sup-

ported. See the manual supplied with the equipment you want

to connect for more information.

Notes on supplying power by USB Type-C

• This product supports USB Type-C Current @ 1.5 A.

• Check that the connected equipment supports a power supply

of 5 V/1.5 A or more by USB Type-C.

• If power cannot be supplied from the connected equipment,

connect the AC adapter supplying power to the Micro-B port.

• Power supplied from the Micro-B port has priority over this

product. If you change power supply during use, the product

turns off temporarily.

If you are using the sensor/camera feature, make sure you re-

configure the connected device as necessary.

When using the headset sensors or camera

Data from the sensors and camera built into the headset

are output from the USB-C port. Some devices do not

support the use of data from sensors or cameras. See the

following for more details.

➡"Supported Equipment and Software" p.27

01_Chapter title

01_Head A

02__lead

Turning On/Displaying Images

See the following for information on using the but-

tons.

➡"Interface Unit" p.10

➡"Extended Features" p.18

• When playing a movie, the movie continues to

playback even though images are hidden and

audio is muted in standby mode or AV mute. To

stop the movie, you need to stop it on the exter-

nal device.

• This product is not chargeable. You need to con-

nect equipment that can supply enough power.

➡"Connecting by HDMI" p.13

➡"Connecting by USB Type-C" p.14

When power is supplied from the Micro-B port or USB-C

port, this product turns on. Also, when a video signal is

being input, the video is displayed automatically.

When no video signal is being input, is

shown on the display.

While viewing an image, you can hide the images and

mute the audio by pressing the [ ] button (AV Mute).

Press the [ ] button again to release AV mute and re-

sume the images and audio.

To turn off the product, disconnect the power supply

source.

Turning On/Displaying Images

Standby Mode and AV Mute

Although standby mode and AV mute will hide the im-

ages and mute the audio, there are a few differences.

Select the appropriate mode to suit your needs.

Setting

Time to Display

Images

Power

Consumed

Standby

mode

Hold down the [ ]

button

Long

(approx. 8 secs.)

Low power

consumption

AV mute

Briefly press the [ ]

button

Short

More than

in standby

mode

This product automatically switches to standby

mode (in Mode 1 only) after 20 minutes of inactivity

or after 20 minutes if AV mute is enabled.

➡"Extended Features" p.18

01_Chapter title

01_Head A

02__lead

Extended Features

Switching between 2D and 3D display

This product uses the side-by-side 3D display format.

To switch between 2D and 3D mode, hold down the

[ ] and the [ ] keys at the same time.

The following is shown on the display when switching

modes.

Adjusting the screen brightness automatically

This product can automatically adjust the brightness of

the screen according to the brightness of the environ-

ment in which it is being used.

To turn auto brightness adjustment on or off, hold down

the [ ] and the [ ] keys at the same time.

The following is shown on the display when switching

modes.

You can access extended features by holding down two buttons at the same time.

You can check the status of the extended features in the display or by using the LED indicators.

Extended Features

Changing the mode setting

The following three modes are available. To switch the mode, hold down the [ ] key

and the [ ] button at the same time.

Power saving feature

[ ] button

When switching mode

LED indicator

Display

Mode 1 (Default setting) Enabled Operations available Flashes white once

Mode 2 Disabled Operations available Flashes white twice

Mode 3 Disabled Operations unavailable

Flashes white three

times

*1 This feature automatically switches to standby mode after 20 minutes of inactivity when no image is being input, or after 20 minutes when AV mute is

enabled.

*2 The [ ] button shows/hides images. Hold down to switch to standby mode.

➡ "Standby Mode and AV Mute" p.17

*3 You can check the mode by the number of times the LED flashes white immediately after making settings.

In Mode 3, the [ ] button is disabled which helps to avoid operation mistakes when you want to show the display at

all times.

01_Chapter title

01_Head A

02__lead

Wearing the Headset

• How an image is perceived varies depending on

the individual.

• You can connect earphones and microphones us-

ing the 3.5 mm audio jack.

Use earphones that conform to the CTIA standard.

You may hear some noise if the cables are

disconnected or connected while content is

being played.

You can clip the headset cable to your clothes.

Make sure the cable does not catch on anything in

the surrounding area while wearing the product.

Also, make sure the cable does not wind around

your neck.

A

Use both hands to open the temples, and then put

on the headset.

Do not use too much force when opening the

temples of the headset.

B

Adjust the position of the headset so that you can

see the image.

Page is loading ...

Epson Moverio BT-35ES User guide

Brand: Epson

Model: Moverio BT-35ES

Type: User guide

This manual is also suitable for

Moverio BT-35E

Download PDF

report

Epson Moverio BT-35ES User guide

This manual is also suitable for

Epson Moverio BT-35ES User guide

Related papers

Other documents