This manual is intended for users of the DA-AP2000 mounting bracket. It
includes instructions for mounting the DA-AP2000 mounting bracket to another
bracket.
• This bracket is intended to be used with DC-D1xxx series model of
cameras. Do not use it with other models of cameras.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1
Mount bracket onto another bracket. Refer to user's
manual of another bracket for details about mounting
this bracket.
Bracket
Connect your camera to the bracket as follows:
2
Screw the bottom cover onto bracket.
Bracket
Bottom
Cover
DA-AP2000 INSTALLATION MANUAL
Ver.1.0
3
Screw the camera dome cover onto the bottom cover.
4
Turn on power.
Bottom
Cover
C
amera
Dome
Cover
Dimensions
Unit: mm (inch)
90˚
45˚
90˚
90˚
Ø 126 (4.96)
Ø 113.1 (4.45)
4 - Ø 4.5 (0.18) Hole
2 - Ø 3 (0.12) Hole
12.8 (0.50)
2.8 (0.11)
139 ± 0.3 (5.47 ± 0.01)
R19
R2
3 - 6 (0.24)
3 - 6 (0.24)
1.3 (0.05)
A - A
100˚
20˚
120˚
20˚
3 - M4 TAP (DP 6mm)
3 - M4 TAP (DP 6mm)
5˚
30.1
(1.19)
Ø 101.1 (3.98)
Ø 166 (6.54)
Ø 161 (6.34)
Ø 140.6 (5.54)
Ø 134 (5.28)
Ø76.1 (3.00)
Ø 143.5±0.2 (5.65±0.01)
Ø 97±0.2 (3.82±0.01)
Ø 90±0.2 (3.54±0.01)
A
A
/