Danfoss DHP-AQ – Schematics User guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss DHP-AQ – Schematics User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DHP-AQ Schematics
The following schematics refer to models:
DHP-AQ Mini
DHP-AQ Midi
DHP-AQ Maxi
Control engineering Master/Slave
When using master/slave in a system with a hot water tank and/or pool, the division is as follows:
1. The master and the slave operate for the heating/cooling system
2. The master heat pump operates for the pool.
3. The slave operates for the hot water tank.
MIDI
Buffer
DHW
2x DHP-AQ (MIDI) M/S Htg & DHW
M
S
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0001/Q.B
42mm
MAXI
Buffer
2x DHP-AQ (MAXI) M/S Htg & DHW
S
M
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0002/Q.B
42mm
Buffer
DHW
2x DHP-AQ (MINI) M/S Htg & DHW
MINI
S
M
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0003/Q.B
42mm
DHP-AQ (MINI) Htg & DHW
Buffer
DHW
MINI
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0004/Q.B
Buffer
DHW
MINI
POOL
DHP-AQ (MINI) Htg, DHW & Pool
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0005/Q.B
DHP-AQ (MINI) Htg only
Buffer
MINI
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0006/Q.B
MAXI
Buffer
DHP-AQ (MAXI) Htg & DHW
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0007/Q.B
MIDI
Buffer
DHW
DHP-AQ (MIDI) Htg & DHW
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0008/Q.B
MIDI
Buffer
DWC
DHP-AQ (MIDI) DWC & boiler
Please note!
The information contained within this document is
intended for theoretical guidance only.
It is incumbent on the installer to ensure that all
installation and design criteria is compliant with the
relevant standards.
* Heating circuit must be frost protected and treated in accordance with BS 7593
011-0009/Q.B
Boiler
IP65 isolator
Auxillliary heat control
Electrical wiring
Motor Exchange valve
Auxilliary heater
Circulation pump (Class A)
Isolation valve
Primary expansion & PRV
Filter
Temperature & pressure relief valve
Danfoss boundary
CW stop tap
CW outlets
DHW outlets
Potable expansion and PRV
CW non-return valve
Balanced CW
Pressure reducing valve
CW strainer
Flow direction
Legend
/