2. BodyCraft
  3. SP-Tablet/Phone Holder

BodyCraft SP-Tablet/Phone Holder Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the BodyCraft SP-Tablet/Phone Holder Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Attach the Tablet holder by sliding the Dual
T-Tabs on the pedestal head into the Dual
T-Slots of the holder.
Insert tablet by placing it on the lower tabs and pushing
down on the spring-loaded bottom of the holder. Use
the tightening ring to adjust position and angle.
Push Down
IMPORTANT: Select the appropriate short or long
support tabs and install to holder. For large devices,
select 4 long support tabs.
Attach C-Clamp making sure the groove is in line
with the handlebar. Adjust the clamp bracket
position with a Phillips screwdriver if necessary.
C-Clamp
Tighten Knob
Rubber Boot
Tightening Ring
12”Gooseneck
1.
3.
4.
2.
Tablet Installation Instructions
/