9
Timer
The timer can be used in two different ways:
■ To switch a hotplate off automatically
■ As a kitchen timer
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting a cooking time
The hotplate must be selected and set.
1.Touch the 0 symbol twice. The ‹ display for the desired
hotplate lights up. The
r symbol appears and ‹‹ lights up
in the timer display.
2.Within the next 10 seconds, set the desired cooking time
from the range of settings.
The cooking time counts down.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
‹.‹ lights up on the hotplate indicator. A signal sounds. ‹‹
lights up on the timer display for 10 seconds. Touch the
0
symbol. The displays go out and the acoustic signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
0 symbol twice. Change the
cooking time or set to
‹‹ in the settings area.
Notes
■ If you have set the kitchen timer, the time on the kitchen timer
will always be shown on the timer display. To call up the
cooking time for a hotplate, select the hotplate and touch the
0 symbol twice. The cooking time appears for 10 seconds in
the timer display.
■ If you have set cooking times for several hotplates, the
cooking time for the selected hotplate always appears in the
timer display.
■ You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Select the hotplate and touch the
0 symbol twice. Change the
cooking time or set to
‹‹ in the settings area.
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
1.Touch the 0 symbol, the V indicator for the kitchen timer
lights up.
‹‹ lights up on the timer display.
2.Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the time has elapsed
A signal sounds once the time has elapsed.
‹‹ lights up on
the timer display. The
V indicator for the kitchen timer lights
up. After 10 seconds, the indicator switches off.
Changing the time
Touch the
0 symbol, the V indicator for the kitchen timer
lights up. Set the desired time in the settings range.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
”‰ lights up in the hotplate
indicator.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
- symbol. A signal sounds. The control
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.