NK1-116

MB QUART NK1-116 User manual

  • Hello! I am an AI chatbot trained to assist you with the MB QUART NK1-116 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
If you are replacing an older or inferior speaker, the
location is chosen for you. Make sure the speaker ts
properly in the hole for the old speaker.
If you are creating your own new location, you must be
careful to verify that there is suf cient depth to mount the
speaker.
Choose a suitable
mounting location
Speaker Mounting Location
Speaker Dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Congratulations on your choice of a MBQuart speaker.
This “Quick Start” Installation guide is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
con guration, and full speci cations by model, visit our
website at mbquart.com
It’s a good idea to con rm that you have purchased the
correct size speakers to t your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.
ABCDE
NK1-116 / NK1-116L
6.58”(174) 3.02”(77) 1.14”(29) 3.58”(91) 5.59”(142)
NK1-120 / NK1-120L
8.46”(215) 3.58”(91) 1.26”(32) 5.20”(132) 7.09”(180)
NK1-169 / NK1-169L
9.69”/6.86”
(246/174)
3.50”(89) 1.20”(30) 3.87”(99) 8.58”/5.74”
(218/147)
Before you start
Once you are sure the speaker ts and has
adequate clearance, connect the positive and
negative wires to the proper terminals. Securely
screw the speaker into place.
Carefully select a route for the speaker wires. If
using existing speaker wires, con rm that the wire
is in good shape and not shorted. In the case of an
illuminated model, route a positive and negative wire
from a switched +12V source.
Con rm t and
mount speaker
Route signal and
illumination wires
Speaker installation
Wiring
A
C
B
D
E
Illumination
Negative
Illumination
Positive
Audio Signal
Negative
Audio Signal
Positive
Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and speci cally excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
NK1-116
NK1-116
NK1-120
NK1-120
NK1-169
NK1-169
NK1-116L
NK1-116L
NK1-120L
NK1-120L
NK1-169L
NK1-169L
NAUTIC
NAUTIC
MBQ NK skr QSG 01 - rev1
Illumination control
If you have purchased an illuminated version, consider getting an N1-RC remote
control. The remote allows you to adjust color, speed and brightness of the
illumination. Check with an authorized MBQuart retailer or check our website
www.mbquart.com for further details.
/