Welcome
Thank you for purchasing the new LED Bluetooth Speaker SY-X212BT. Please read
this manual carefully before operating your product and pay close attention to the
precautions which are mentioned below. Store this user manual in a safe place for
future reference
Function description
Charge description
a. Please fully charge the battery before using the device for the first time.
b. Connect one end of the USB cable to the unit and the other end to PC in order to commence
charging. The Red LED will turn on indicating that the unit is now charging. Once the light goes
off, this means that the unit is completely charged and ready to use.
Caution
This unit has a built-in lithium battery in the speaker. Do not disassemble or replace the battery. Do
not put the speaker in high temperature environment or throw it into fire.
Modes
The SY-X212BT has 2 different modes (Bluetooth and Radio). To change from one mode to
another, simply press the “M/LED” button:
Mode 1: Bluetooth mode (when you on the unit, the mode is set to BT mode).
Mode 2: Radio mode
For USB, Micro SD and Line in, the unit automatically detects the source and will start to play the
music automatically.
Bluetooth connection & hands free for calling
a. Turn on the unit and the LED light will come on. A sound will be heard and will indicate that the
unit is now in Bluetooth mode.
b. Turn on the Bluetooth on your device to search for the speaker. Search for the device name
and then click on it to pair it and establish a connection. The device should show SY-X212BT.
Connect your device to the speaker by clicking on SY-X212BT. When a sound is heard, this
means that the connection has been established.
c. Press the ▶ǁ button once to play/pause the music. Press the I◀◀ button to go to the previous
track and press ▶▶I to go to the next track. Press V-&V+ for adjusting the volume.
d. When there is an incoming phone call, short press the ▶ǁ button to receive the call and the
hands free function will commence automatically. Short press the ▶ǁ button to stop the calling
function. If music was playing before the phone call, the device will automatically return to
music playing mode after the call function has ended.
Audio connection
a. Turn the power on of the Bluetooth speaker, and connect the audio cable with the audio-in port
of the speaker with another end into the audio-out port of your external music device.
b. Press the ▶ǁ button once to play & pause. Press V-&V+ to adjust the volume level accordingly.
TF card player
a. Power on the speaker and insert a TF card inside the TF card slot to play your music
b. To playback your music, press the ▶ǁ button once to play or pause the music, and press ▶▶I
button once to skip to the next track. Press the I◀◀ button to skip to the previous track. Use the
V-/V+ buttons to adjust the volume.
USB mode
a. Power on the speaker and insert the USB flash disk inside to play music
b. To playback your music, press the ▶ǁ button once to play or pause the music, and press ▶▶I
button once to skip to the next track. Press the I◀◀ button to skip to the previous track. Use the
V-/V+ buttons to adjust the volume.
FM mode
a. Power on the speaker and short press the M/LED button switch to FM mode, a sound will be
heard.
b. To search for channels, press the ▶ǁ once to play/pause the channel. Press the ▶▶I button
once to jump to the next channel, press the I◀◀ button once to jump to the previous channel
and use the V-/V+ buttons to adjust the volume.
c. Press and hold the ▶ǁ button so that the unit can automatically search for FM channels and
save them automatically. The unit can save up to a maximum of 30 channels.
LED ON/OFF
a. Power on the Bluetooth speaker and the default mode is in Bluetooth connection mode
b. Press and hold the M/LED button for turning the LED lights on or off.
Product Specifications
Bluetooth compliant: 2.1
Support profiles: A2DP, AVRCP, and HFP
Operating Frequency Range： 2.4GHz-2.48GHz
Bluetooth transmission distance: 10meters
Audio formats supported: MP3/WMA
FM range: 87.5-108.0 MHz
Speaker driver: Stereo 45mm 3Ohm
Speaker output power: 2*3Watts
Frequency Response: 100Hz-20 KHz
Signal-to-Noise Ratio:
≧
95dB
Distortion:
≦
0.5%
Working voltage： DC3.7V
Charging voltage： DC5V
Battery capacity：1200mAh
Playing time： 3 hours (max volume)
Product size：180*50*55mm
Weight: 300g
Declaration of Conformity
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Bluetooth Speaker with LED
Sytech® SY-X212BT complies with the following directives:
CE Standard: Directive 2004/108/EC
R&TTE Standard: Directive 1999/5/EC
RoHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
/