Vivitek D803W Installation guide

Category
Stereoscopic 3D glasses
Type
Installation guide

Vivitek D803W: Experience Stunning Visuals with this Versatile Multimedia Projector. Unleash your creativity with an array of connectivity options, including HDMI, USB, and wireless capabilities. Engage your audience with dynamic presentations and immersive multimedia content, all in stunning WXGA resolution. Enjoy vivid, true-to-life colors and sharp images that will captivate your viewers.

Vivitek D803W: Experience Stunning Visuals with this Versatile Multimedia Projector. Unleash your creativity with an array of connectivity options, including HDMI, USB, and wireless capabilities. Engage your audience with dynamic presentations and immersive multimedia content, all in stunning WXGA resolution. Enjoy vivid, true-to-life colors and sharp images that will captivate your viewers.

©2011 Vivitek Corporation. All rights reserved. Vivitek and the Vivitek logo are registered trademarks of Vivitek Corporation. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Turn on “Side-by-Side” or
“Top/Bottom” if needed.
Note: Selection is based on content
requirement.
View the 3D content with DLP
®
Link
Active Shutter glasses.
Note: XPand X102 DLP-Link 3D glasses are recommended
HOW TO SET UP YOUR VIVITEK 2D-3D PROJECTOR USING A 3D SOURCE
Using HDMI, connect your 3D source to the projector.
Note: If using a 3D laptop, please refer to guide on How to Set Up Vivitek PC 3D-Ready Projectors”
Go to the OSD menu on the projector and ensure the 3D function is on.
Under “Installation II”, select “Advanced” Then select “3D” Make sure “DLP-Link” is selected for “3D”
Select source as “HDMI on
the projector.
Note: Menu and source options will vary
depending on the projector
HOW TO SET UP YOUR VIVITEK 2D-3D PROJECTOR USING 2D TO 3D CONVERSION
Using HDMI, connect your source to the projector.
Select source as “HDMI
on the projector.
Notes:
Menu and source options will vary
depending on the projector
The projector should be set as
only/solo display for the source if
option is available
On the remote, press “2D -> 3D”. OR Activate the 2D-3D function through the projectors OSD menu.
Under “Installation II”, select “2D to 3D Make sure “2D to 3D Enable” is “On
View the 3D content with DLP Link Active Shutter glasses.
Note: XPand X102 DLP-Link 3D glasses are recommended
Cable/Satellite Game ConsoleBlu-Ray
Player
VGARS-232
L-AUDIO-R
VIDEO
AUDIO IN
HDMI
S-VIDEO
Cable/Satellite Game ConsoleDVD Player PC/Laptop
HOW TO SET UP VIVITEK 2D-3D PROJECTORS
D512-3D
D536-3D D538W-3D H1086-3D
VGARS-232
L-AUDIO-R
VIDEO
AUDIO IN
HDMI
S-VIDEO
  • Page 1 1

Vivitek D803W Installation guide

Category
Stereoscopic 3D glasses
Type
Installation guide

Vivitek D803W: Experience Stunning Visuals with this Versatile Multimedia Projector. Unleash your creativity with an array of connectivity options, including HDMI, USB, and wireless capabilities. Engage your audience with dynamic presentations and immersive multimedia content, all in stunning WXGA resolution. Enjoy vivid, true-to-life colors and sharp images that will captivate your viewers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI