1 2
3
4
5
6
Pull the overflow filter forward from
the wash tub in the direction of the
arrow.
Turn the net over and rinse in water.
Use a brush or your hand to remove all
of the lints which has adhered to the
overflow filter.
Insert the overflow filter back into the
wash tub.
Insert the rotation filter-C back
into the overflow filter.
If only rotation filter-C need washing, proceed the process 1 > 3 > 6 on the upper figure.
Overflow filter & Rotation filter-C
Lift up the area A of the overflow filter.
Take out the rotation filter-C by
pulling in direction shown.
* For WP-25145SD
1 2 3
4
5
6
1 2 3
4
5
6
13
CARE AND MAINTENANCE
Washing machine
l Be sure to disconnect the power cord from the electric outlet before starting care and
maintenance.
n If the washing machine itself becomes dirty
l The washing machine can be cleaned with a mild liquid detergent. Never use abrasive
cleaner or chemicals such as benzene or thinner to clean the washing machine,
because these materials will damage both the painted surfaces and the plastic parts.
Pulsator
n If a button or some other object gets caught in the pulsator.
1. Take out the pulsator cap with “-” type driver. (Fig. a)
2. Use a screwdriver to loosen the screw in the center of the
pulsator and lift the pulsator straight up in order to remove the
button or other object. (Fig.b)
3. Replace the pulsator and tighten the screw.
4. Replace the pulsator cap.
Fig. a
Fig. b
