ADC Diagnostix™ 952 User manual

Diagnostix™ 952
ADC
Brand
ADC
Model
Diagnostix™ 952
Type
User manual

This manual is also suitable for

ADC Diagnostix™ 952 is a wall-mountable blood pressure measuring device designed for accurate and convenient blood pressure monitoring. It features a large, easy-to-read manometer with a scale plate holder for clear visibility of readings. The unit includes a cuff basket for easy storage of the cuff and a coiled tubing for connecting the inflation system. It also has a locking mechanism to secure the mercury within the reservoir during maintenance or transport. The Diagnostix™ 952 is suitable for professional use in various healthcare settings.

ADC Diagnostix™ 952 is a wall-mountable blood pressure measuring device designed for accurate and convenient blood pressure monitoring. It features a large, easy-to-read manometer with a scale plate holder for clear visibility of readings. The unit includes a cuff basket for easy storage of the cuff and a coiled tubing for connecting the inflation system. It also has a locking mechanism to secure the mercury within the reservoir during maintenance or transport. The Diagnostix™ 952 is suitable for professional use in various healthcare settings.

1
Diagnostix™ 952B
• Wall Mount
Instructions
• Schematics
Parts List
• Maintenance
2
Tools Needed
• Medium slotted screwdriver
• Hammer
• Drill with 3/16” drill bit
Wall Mount Instructions
1. Unit may be wall mounted without disassembling main unit from
swivel base/wall mount bracket. Position bracket so that center
of unit is approximately 4’6” from the floor. Using a pencil, mark
the holes on either side of the wall bracket.
2. Check for level and drill 3/16” holes approximately 7/8” deep.
Gently tap the 2 screw anchors into the holes until they are
flush with the wall.
3. Position the manometer and bracket and mount to the wall
using supplied screws. Take care not to overtighten screws. Po-
sition the cuff basket approximately 2” to the right of the
manometer.
4. Using a pencil, mark the 3 holes as before. Repeat the proce-
dure for drilling the holes, inserting anchors, and mounting.
5. Attach 8 foot length of coiled tubing to air inlet underneath
mounting bracket. Insert “male” luer connector on free end of
coiled tubing to “female” luer connector on bladder tubing. Wrap
cuff around bulb and store in the basket.
Important: This instrument is designed to permit wall mounting without
first disassembling main unit from its swivel base/mounting bracket.
To remove main unit from bracket, disconnect tubing from mounting
bracket. Unscrew wingnut from bottom of mounting bracket, separating
main unit from bracket. Reverse procedure to reassemble.
WALL MOUNTING
INSTRUCTIONS (1 OF 2)
3
CONNECTING THE INFLATION
SYSTEM TO MANOMETER
Remove red safety cap which
seals the reservoir containing mer-
cury (on the 952, the red safety
cap is located on the air inlet be-
neath swivel base). Attach free
end of reservoir tube securely to
air inlet. Save red safety cap for
later use. When transporting mer-
cury instrument we recommend
placing the red safety cap on
reservoir.
Please Note:
It is normal for negli-
gible amounts of residual mercury
droplets to accumulate around the
air inlet beneath the red safety cap
during transportation.
WALL MOUNTING
INSTRUCTIONS (2 OF 2)
4
MAINTENANCE
To Lock Mercury Within the Reservoir: Tilt the en-
tire unit back 45° towards the reservoir to per-
mit mercury to flow out of cartridge tube and
into reservoir. When cartridge tube is com-
pletely emptied of ALL mercury (and while it is
still tilted 45°), move locking lever to the right
“OFF”. Mercury should be locked within the
reservoir during maintenance or transport. To
release mercury, move lever to “ON” position. If
necessary, tilt unit towards tube to allow mer-
cury to flow out of reservoir.
Lift on the spring loaded EZ-Tube
™
mechanism located at the top of the
instrument. Tilt instrument forward to
free tube. If necessary use a small
flathead screwdriver to help dislodge
the top of the tube. To replace tube,
lift EZ-Tube
™
mechanism and insert
base of tube into main unit, being
sure graduation marks face out.
Next, position top of tube and re-
lease EZ-Tube
™
mechanism.
5
SCHEMATIC PARTS LIST (1 OF 2)
14
15A
17/W
6
15
16
7
8
13
25
27
29
26
28
30
37
1
2
3
4
5
6
Ref # Item # Description
1 952-101 Butterfly Nut
2 952-102 Fitted Washer
3 952-103 Mounting Bracket
4 952-104 Basket Screws (5)
5 952-105 Molleys (5)
6 952-025 Cuff Basket
7 952-107 Basket Clips (2)
8 952-108 Rubber Tube
13 952-109 Reservoir Connector
14 952-110 Cotton Filter
15 952-111 Reservoir Connector Gasket
15A 952-112 Reservoir Feeder Tube
16 952-113 Reservoir Cover Screws (3)
17W 952-114 Reservoir Cover
18 952-115 Scale Plate Holder
19 952-116 Cartridge Top Plate
20 952-117 Rubber Gasket
21 952-118 Reservoir Holder for Top Plate
22 952-119 Rods (2)
23 952-120 Springs (2)
24 952-121 Locking Washers (2)
25 952-122 Locking Lever Handle
26 952-123 Reservoir Screws (2)
27 952-124 Reservoir Tank
28 952-125 Reservoir Rod
29 952-126 Bushing
30 952-127 Locking Screw
31W 952-128 Scale Plate
32W 952-129 Graduated Plastic Cartridge Tube
33 952-130 Rubber Gasket
34 952-132 Filter Plug
35 952-131 Diaphragm
36 952-133 Screw Cap
37 952-134 Reservoir Base Screws (2)
952B UNIT
33
35
34
36
32/W
31W
18
19
21
23
20
22
24
SCHEMATIC PARTS LIST (2 OF 2)
7
ADC
55 Commerce Drive
Hauppauge, NY 11788
ADC (UK) Ltd.
Unit 6, PO14 1TH
United Kingdom
tel: 631-273-9600, 1-800-232-2670
fax: 631-273-9659
www.adctoday.com
email: info@adctoday.com
EC REP
IB p/n 9354A-00 - rev 2
©2015 ADC • Printed in the U.S.A.
To Register Your Product, visit us at www.adctoday.com and follow the links
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

ADC Diagnostix™ 952 User manual

Diagnostix™ 952
ADC
Brand
ADC
Model
Diagnostix™ 952
Type
User manual
This manual is also suitable for

ADC Diagnostix™ 952 is a wall-mountable blood pressure measuring device designed for accurate and convenient blood pressure monitoring. It features a large, easy-to-read manometer with a scale plate holder for clear visibility of readings. The unit includes a cuff basket for easy storage of the cuff and a coiled tubing for connecting the inflation system. It also has a locking mechanism to secure the mercury within the reservoir during maintenance or transport. The Diagnostix™ 952 is suitable for professional use in various healthcare settings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents