Welcome
Thank you for purchasing the new Professional Wireless DJ acoustic system, “XtremeBass” SY-XT9000DJ. Please
read this manual carefully before operating your product. And pay close attention to the precautions which are
mentioned below. Store this user manual in a safe place for future reference.
Safety Precautions
Points to observe for safe usage
Read this manual carefully before using the product. They contain instructions on how
to use this product in a safe and effective manner. SYTECH will not be responsible
for problems resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product.
Return it to your authorized SYTECH dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please
dampen the cloth with water only. Anything else has the chance of dissolving the paint or
damaging the plastic.
Maintenance.
If you have problems, do not attempt to repair the unit yourself.
Heat.
Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.
Accessories.
Use only supplied accessories
Remote Control Functions
1. Standby
2. Previous FM frequency
3. Next track
4. Previous track
5. Increase volume
6. Decrease volume
7. Numerical keys
8. Repeat mode: (All, Normal, Single, Folder, Random, Browse)
9. Input selection (USB/SD/FM/Bluetooth/Recording)
10. Next FM frequency
11. EQ Mode
12. Play / Pause / Auto FM scan
***This picture is for reference purposes only.
1. Under normal circumstances, the remote control should be aimed directly at the receiving window of the unit from about 6
meters and within a 30° angle.
2. When operating the remote control, aim the remote control at the receiving window of the unit and ensure that there are no
obstacles between the remote control and the unit.
3. If the remote receiver is in a position to direct sunlight, it may fail. In this case, move the speaker away to avoid the light.
4. Avoid mixing old and new batteries. Replace the remote control batteries regularly.
Functions and connections
Function of front board:
1. USB/SD/Bluetooth control panel (Channel 1 & Channel 2) 12. Input selector (Channel 2)
2. Track control / folder selection 13. Microphone “Talk over”
3. VU meter 14. Crossfader (CH1/CH2)
4. Microphone Echo level control knob 15. Headphone volume control knob
5. Microphone volume control knob 16. Party Light Switch (On/Off)
6. Input selector (Channel 1) 17. Audio output (RCA)
7. Treble control 18. Audio input (AUX1)
8. Bass control 19. Audio input (AUX2)
9. Cue Selector 20. Line In
10. Channel fader control 21. Microphone input
11. Master volume control 22. Headphone input
23. Sound effect volume control
24. Sound effect speed control
25. Sound effects (8 modes)
Control Panel
The SY-XT9000DJ Speaker includes two panel controls. Each panel is totally independent and can control the
following sources:
Control Panel 1 (Channel 1):
• Bluetooth
• FM radio
• Recording
• Remote control
• USB / SD (Channel 1)
• Line In
• Audio input (AUX1)
Control Panel 2 (Channel 2):
• USB / SD (Channel 2)
• Aux 2
Functions on Control board
USB/SD/Bluetooth control panel (1) (Channel 1)
The control panel (1) is used to select the different modes.
A. Mode: Select the different modes:
USB / SD
Bluetooth
FM radio
Recording
B. Play: USB/SD: Start music playback
Bluetooth: Start music playback
FM: Start the auto scan function
Record: Records the voice when a microphone is connected
C. Stop: Stop the Playback of any selected mode.
D. Repeat: Repeat function: All, Normal, Single, Folder, Random, Browse
E. Previous: Select the previous track in the following mode: USB / SD, Bluetooth, FM
F. Next: Select the next track in the following mode: USB / SD, Bluetooth, FM
USB/SD/ control panel (2) (Channel 2)
The control panel (1) is used to select the different modes.
A. Mode: Select the different modes:
USB / SD
LCD Display information
1. Root directory.
2. Input source
3. Track number
4. Track or folder name
5. Elapsed time
Track Selection (2) (Channel 1&2)
• The track button will only work under USB /SD mode.
• Select your desired track, folder or playback the selected track.
• Insert a USB / SD card. The display will indicate the first track of the first folder.
• Turn the knob left or right to search for a track. Press the track button downwards to play the desired track.
• If the USB or SD card contain different folders, press the track button downwards to access the selection of the
folder. After selecting the folder, press the track button downwards to access the tracks located in the folder.
Joggle the knob until you find the desired track. Press once more the track button to play the selected track.
VU-Meter (3)
LED indicator of the output signal
Microphone echo control (4)
Adjust the echo level of the microphone output
Microphone volume control (5)
Adjust the microphone volume output
Input selector (6) (Channel 1)
Select the desired input source:
AUX1 (18): AUX in RCA input to connect an external device such as TV, DVD, MP3, etc.
Line In (20): Line in 3.5mm jack input to connect any external audio device such as Smartphone, Tablet, MP3, etc.
SD1/USB1 (1): 2.0 USB port or SD card slot. Insert the desired memory device for playback.
Treble control (7) (Channel 1&2)
Turn the knob to adjust the High frequencies of channel 1 or channel 2.
Bass control (8) (Channel 1&2)
Turn the know to adjust the low frequencies of channel 1 or channel 2
Cue selector (9) (Channel1&2)
Press the CUE button to monito the audio via the headphone
Channel fader (10) (Channel1&2)
Adjust the volume level of each channel independently.
Master volume fader (11) (Channel1&2)
Adjust the master volume of all the channels.
Input selector (12) (Channel 2)
Select the desired input source:
AUX2 (19): AUX in RCA input to connect an external device such as TV, DVD, MP3, etc.
SD2/USB2 (1) (Channel 2): 2.0 USB port or SD card slot. Insert the desired memory device for playback.
Microphone talk over (13)
Press the Talk over button to reduce the volume level of all the audio sources by 20dB. The microphone output level
will remain at its normal level. This function is ideal for making announcements, without stopping the music.
Crossfader CH1/CH2 (14)
The cross fader function is used to create a smooth transition from channel 1 to channel 2. Mix your tracks by simply
moving the knob from channel 1 to channel 2, or vice versa.
Headphone volume control (15)
Adjust the volume level of the headphone output.
LED light (16)
Press the party Light button to activate the LED lights located on the speaker grill.
Line out (17)
Line output enabling connection to a mixer, amplifier, etc.
Aux 1 (18) (Channel 1)
Connect an external device for audio input such as: DVD, TV, VCR, MP3, etc.)
Aux 2 (19) (Channel 2)
Connect an external device for audio input such as: DVD, TV, VCR, MP3, etc.)
Input 3.5mm jack (20)
Connect an external audio device such as MP3, Laptop, Tablet, Smartphone, etc.
XLR Microphone input (21)
Connector for 3 pin XLR microphone
Headphone input (22)
Headphone input 6.5mm. Jack connector
Sound effects volume (23)
Adjust the volume level of the sound effects.
Sound effect speed (24)
Adjust the sound effect speed level
Sound effect modes (25)
Select from the 8 different sound effects: Crowd, Bird, Scream, Glass, Applause, Siren, Croak and Alien
Bluetooth function
Select the BLUETOOTH mode in channel 1, using the “INPUT” switch on the top panel of the unit or from the remote
control itself.
Please ensure the BT devices you wish to connect has the Bluetooth function enabled and visible.
Start the scan function from your device and search for “SY-XT9000DJ”.
Once you have found the device, press on it and connect the speaker with the device.
When the connection is successful, a “tick” tone will be heard. If the speaker can’t be connected, please restart the
speaker or the device and try again.
After the connection is successfully established, you can begin to play music. To ensure
continuous stability of the music signal, try to keep the BT device and the mobile phone facing one another.
The BT of the unit can be used up to 10 meters if there are no obstacles.
Note: Bluetooth function is only available on Channel 1.
Before pairing a device to the speaker, disconnect the previous device.
Due to different Bluetooth Profiles and versions, we cannot guarantee all devices can connect successfully.
FM Radio
- Press the “MODE” button (1) to select the FM mode.
- Press the “Pause/Play” button to start the automatic search of the stations.
- The unit will start to search all the main stations and will store them automatically.
- Once the scan search has finalized, press the “NEXT” (F) or “PREVIOUS” (E) buttons to access to the stored
channels.
- The unit will store up to 40 presets.
Note: The FM stations can only be stored automatically. The position of the channel store number will start from the
lowest FM frequency to the highest.
USB /SD-MMC Function
The SY-XT9000DJ speaker includes 2 x USB control panels. It is possible to insert 1x USB pen drive on channel 1
and another USB on channel 2.
Before starting to playback a USB, make sure the USB is formatted as FAT32 or else the unit will not be able to
detect the files.
- Insert the USB drive into the USB slot of the Sound system
- The unit should detect the USB automatically and play the first track
- If in the case the USB does not start automatic playback, press the Mode button (1) and select USB mode.
- If you wish to pause the music, simply press the pause button (B)
- To select the next track, simply press the “Next” button (F)
- To select the previous track, simply press the “Previous” button (E)
- While listening to the tracks, adjust the EQ setting as per your desire.
Note:
1. Make sure the music files are as MP3, WMA format or else the music system will not be able to read the files.
2. Make sure the music files are recorded to the root directory.
3. It is advisable to remove unnecessary files for faster reading of the content.
4. The USB is only meant to connect a USB pen drive. The USB port is not compatible for HDD devices, or MP3
player.
SD/MMC FUNCTION:
Make sure your SD/MMC card is formatted as FAT32.
Insert the SD/MMC card into the SD slot of the Sound system
The unit should detect the SD/MMC card automatically and play the first track
If in the case the SD/MMC card does not start automatic playback, press the Mode button (1) and select USB mode.
If you wish to pause the music, simply press the pause button (B)
To select the next track, simply press the “Next” button (F)
To select the previous track, simply press the “Previous” button (E)
While listening to the tracks, adjust the EQ setting as per your desire.
Recording function
Before using the recording function, make sure you have inserted a USB or a SD card in Control panel 1.
Note: The recording function will only record voice. It is therefore necessary to connect a microphone to use this
function.
Record:
- Press the “MODE” button (1) to select the Recording function.
- “Record” should appear on the LCD display.
- Press the “Pause/Play” button to start the recording of the voice into an external memory such as a USB or a SD
card.
- If the external memory is used for the first time, a new folder will be created into the memory and named as
“REC001, REC002” etc.
- Press “Pause/Play” or “Mode” button to stop the recording.
Playback:
- To playback a recorded file, make sure you have inserted the USB or SD card where the files are stored.
- Press and hold the “Play/Pause” button to start playback of the recorded files.
- Press the Next and Previous buttons to select the desired recorded track.
Mixer function
With the Pro Mixer Sound sytech SY-XT9000DJ and dual control panel, you will be able to mix and produce music on
the fly.
Simply connect it and start the party anywhere, anytime thanks to its powerful 2 x 12” woofers. Mix from any source,
including Bluetooth, USB, and FM Radio. Become a Pro with the SY-XT9000DJ.
Mixing options:
Channel 1 Channel 2
SD Card 1 SD2 / USB2 / AUX2 / Mic
USB 1 SD2 / USB2 / AUX2 / Mic
Bluetooth 1 SD2 / USB2 / AUX2 / Mic
FM radio 1 SD2 / USB2 / AUX2
Mic SD2 / USB2 / AUX2
AUX1 SD2 / USB2 / AUX2 / Mic
Line In SD2 / USB2 / AUX2 / Mic
Recorded file SD2 / USB2 /AUX2 / Mic
Note:
The following functions are only available through Channel 1:
. Bluetooth
. FM radio
. Recording
. Remote control
Rear Connection
1 2
1. Power ON/OFF
2. Power supply: AC 220-240v, 50Hz
Main technical specifications
Basic Specifications
• 2 x 12"DJ speaker with wooden cabinet
• 2 Channels with DJ Mixer function
• 8 DJ sound effects
• Channel 1: USB/SD/FM/Bluetooth/Recorder/Aux1
• Channel 2: USB/SD/Aux2
• Folder and track search
• 2 x LCD displays with ID3 (supports folder and track name)
• Headphone monitor Cue function
• Microphone input
• Remote control (Channel 1)
• RGB light on woofer grill
• Output power: 150W RMS.
• Output power: 1125W PMPO
• Power supply: AC220V-240V, 50Hz
Bluetooth Specifications
• Bluetooth Module: B020705
• Bluetooth Version: V3.0 + EDR
• Bluetooth Profiles: A2DP, AVRCP
• Bluetooth Pairing name: SY-XT9000DJ
• Compatible Audio Formats in Bluetooth: MP3/WMA/WMV
USB/TF card Specifications
• 2.0 USB Port (Max Capacity: 32GB)
• SD Card Slot (Max Capacity: 32GB)
• Compatible Audio Formats in USB: MP3/WMA/WMV
• Compatible Audio Formats in SD: MP3/WMA/WMV
Technical Specifications
• Output power: 1125W PMPO
• Output power: 150W RMS
•
SNR:
93dB±3dB
• Frequency response:
45-20 KHz
• Power supply: AC220V-240V, 50Hz
• Driver unit:
2
x 12" woofer, 2 x 3" tweeter
Above specifications are the specifications of “SY-XT9000DJ” SPEAKER and are for reference purpose only.
Due to continuous product development, specifications may be subject to change without prior notification.
Do not expose to adverse weather conditions (Such as rain or high temperatures) as it can cause malfunctions
Simple troubleshooting
Try the troubleshooting steps below if you are having problems while using your speaker. If problems still exist,
please look for a qualified technician or contact Sytech technical department.
To prevent electric shock or expand the scope of the malfunction, do not repair by yourself.
Symptom Possible problem Solution
No function light & no
sound
1. Plug is not well connected
Insert the plug into electrical outlet
2. Speaker power button is
not turned on
Turn on the button
Function light on but no
sound
1. Cable misconnected Turn off the power, check the input jack to ensure
proper audio signal is connected to relevant input jack
2.Speaker are not connected
or misconnected
Power off, then check and confirm the cable
connection again
3.Audio signal is not
transmitted to speaker
Check all the speaker if there is audio signal output
Remote control does not
work
1. Before you press any function button, first select the correct source with the remote
control instead of the main unit
2. Reduce the distance between the remote control and the unit
3. Insert the battery with its polarities (+/- signs) aligned as indicated
4. Replace the battery
5. Aim the remote control directly at the sensor on the front of the unit
Cannot display some files
in the USB device
1. The number of folders or filed in the USB device exceeds the max limit. This is not a
malfunction of the unit.
2. The formats of these files are not supports
USB device not supported 1. The USB device is incompatible with the unit. Try another one.
Poor radio reception 1. Increase the distance between the unit and your TV or VCR
2. Fully extend the FM antenna
Bluetooth does not connect
with external device
1. Verify that the external device is compatible with A2DP
2. Verify that the external device is within the transmission range
3. Verify that the external device has already been paired with the unit.
4. Verify if there is no other external device paired with the unit.
If the problem exists after checking related procedures above, please refer to the appointed service agent or
professional technician to fix it. Do not attempt to open the cover, otherwise we assumes no responsibility
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Trolley Speaker
Sytech® SY-XT9000DJ complies with the following directives:
R&TTE Standard: Directive 2014/53/EU
ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
/
