Topeak TW013 Owner's manual

Brand: Topeak

Model: TW013

Type: Owner's manual

Art no. TW013

• Maximum Weight Capacity: 25 kg/ 55 lb

• Please read all instructions before ﬁrst use.

PREPSTAND™ RACE USER’S GUIDE

1. Always fully expand supporting legs for a steady foundation.

2. When setting up bike, make sure Quick Release Clamp Levers are tightened.

3. Keep main unit parallel with one of the Support Legs for stability.

4. Maximum weight capacity: 25 kg (55 lb)

5. Always use both hands to fold main unit, otherwise main unit may pinch your

ﬁngers and cause injury.

6. Always make sure the Quick Release Clamp levers and adjusting knobs are

securely locked after mounting bike.

2-year Warranty: All mechanical components against manufacturer defects only.

Warranty Claim Requirements

To obtain warranty service, you must have your original sales receipt. Items returned without a

sales receipt will assume that the warranty begins on the date of manufacture. All warranties

will be void if the product is damaged due to user crash, abuse, system alteration, modiﬁcation,

or used in any way not intended as described in this manual.

* The speciﬁcations and design are subject to change without notice.

Please contact your Topeak dealer with any questions. For USA customer service,

call: 1-800-250-3068

www.topeak.com

WARRANTY

Main Unit

Supporting Legs

OPTIONAL ACCESSORIES

Tool Tray

Art No. TW001-SP02

WARNING

Handlebar Stabilizer

Art No. TW001-SP03

NOTE OF BB HOLDER

Fences of Bottom

Bracket Cradle

If the frame does not ﬁt the BB cradle properly,

install the BB Holder* on fences of the bottom

bracket cradle for stability.

* Compatible with regular frames.

MAIN UNIT ADJUSTMENT

Lock the Main Unit by turning the Fold / Unfold

Knob clockwise.

Unfold the Main Unit by turning the Fold / Unfold

Knob counter clockwise.

Press the Main Unit down until "click" is heard.

For 130 mm Rear Dropout (Road Bike)

PrepStand™ Race can be ﬁtted with Quick Release Fork or 2

type rear dropout widths (130 and 135mm) by changing the

positions of shims as below.

1. Main Unit

1a. 20mm Thru-Axle Mount

1b. Sleeve for 15mm Thru-Axle Mount

1c. QuickRelease Skewer

1d. DualMount Adjusting Knob

1e. Bike Wheel Hook

1g. Velcro Fastener

1h. Fold/ unfold Knob

1i. B.B. Cradle

1j. Spacer x 2

1k. B.B. Holder

2. QuickRelease Clamp

3. Support Legs

DETAILED PARTS DESCRIPTION IMPORTANT

Shims x 2

Install bikes with Quick Release Fork

For 135 mm Rear Dropout (Mountain Bike)

* For Quick Release Skewer

Install bikes with Rear Dropout

Always make sure the Main Unit is

securely locked in place.

Click

1 2 3

: Fork or Rear Dropout mounting position.

4 5

42 3

Quick Release

Skewer is

stored in the

inner pocket

of storage bag

Release Support Legs by opening the Quick

Release Clamp Lever.

5mm Allen Key

Clamping strength

adjustment

Fully expand the Support Legs.

Recommended

Torque:

3 Nm or

26.5 in-lb

Adjust the height of the Main Unit by releasing the

Quick Release Clamp Lever.

Ready to use.

Always fully expand support legs

for a steady foundation.

Clamping strength

adjustment

5mm

Allen Key

SUPPORT LEGS ASSEMBLY

Release knob to adjust for proper

position.

Store front wheel on hook.

Install Fork on Quick Release Skewer. Tighten

the Adjusting Knob and lock the Quick Release

Skewer Lever.

Set up bikes with Quick Release Fork

Remove front wheel.

fork mounting position

Loosen the Quick Release Skewer Lever.

Place bottom bracket into cradle and

secure with hook and loop fastening strap.

A. INSTALL BIKES WITH QUICK RELEASE FORK

4 5 6

7 8

1 2

3 4

5 6

Recommended

Torque:

3 Nm or

26.5 in-lb

6 7

B. INSTALL BIKES WITH THRU-AXLE FORK

Release knob to adjust for

proper position.

Remove axle ﬁrst.

Mount fork onto Thru-Axle Mount. Reinstall the axle properly. Store front wheel on hook.

Release Adjusting Knob and reinstall the DualMount from opposite

side.

Place bottom bracket into cradle

and secure with hook and loop

fastening strap.

Remove front wheel.

C. INSTALL BIKES WITH REAR DROPOUT FOR MAINTAINING FRONT BRAKE

Remove rear wheel carefully.

Release knob to adjust for proper position.

Store rear wheel on hook.Install Rear Dropout on Quick Release Skewer.

Tighten the Adjusting Knob and lock the Lever.

Rear dropout mounting position

Loosen the Quick Release Skewer Lever.

Place bottom bracket into cradle and

secure with hook and loop fastening strap.

(back view)

For 130 mm Rear Dropout (Road Bike)

For 135 mm Rear Dropout (MTB)

Sleeves for 15 mm Thru-Axle

Spacer x 2

included

For 15 mm Thru-Axle Fork

For 20 mm Thru-Axle Fork

1 2

3 4 5

6 7 8

1 2

3 4

5 6

Topeak TW013 Owner's manual

Topeak TW013 Owner's manual

Topeak TW013 Owner's manual

Related papers

Other documents