2. Ridetech
  3. 11349572

Ridetech 11349572 Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the installation instructions for the ridetech 1963-1964 C10 Steering Kit. This document outlines the components included, such as the Tie Rod Adjusters and Jam Nuts, and provides important safety information about thread engagement and the use of antisieze compound. I'm ready to answer any questions you may have about the installation process or the components of the kit.
  • What is the Tie Rod Adjuster designed to replace?
    Which end of the adjuster has a groove cut in it?
    What compound should be used when installing the Tie Rod Adjuster?
    What is the minimum thread engagement required for the tie rods?
1812-482-2932
Installation
Instructions
Recommended Tools
www.ridetech.com
Major Components .....In the box
QTY Part Number Description
2 90000091 Tie Rod Adjuster
2 99800002 5/8”-18 Right Hand Jam Nut
2 99800003 5/8”-18 Left Hand Jam Nut
1 90003043 Idler Arm
2 90003047 Outer Tie Rod End
2 90002918 Inner Te Rod End
Part # 11349572 - 1963-1964 C10 Steering Kit
NOTES:
This Tie Rod Adjuster is designed to take place of the OEM steel sleeve.
One end of the adjuster has a groove cut in it, this is the LEFT HAND threaded side.
When installing the Tie Rod Adjuster, use antisieze compound on the threads.
FOR YOUR SAFETY, THE TIE RODS NEED A MINIMUM 15/16” OF THREAD ENGAGEMENT INTO THE
TIE ROD ADJUSTER. USE THE SIGHT HOLE IN THE SIDE OF THE TIE ROD ADJUSTER TO ENSURE
PROPER THREAD ENGAGEMENT.
REV2 7/30/20
/