2. Home Accents Holiday
  3. 21PA63007

Home Accents Holiday 21PA63007 Operating instructions

  • Hello! I've reviewed the user manual for the 5 FT Bone Throne. This document includes detailed assembly instructions, a parts list, and important safety warnings. It specifies that the throne is for decorative use and is suitable for both indoor and outdoor settings and holds up to 250 lbs. I'm ready to answer any questions you have about the Bone Throne or the information in this manual.
  • What is the Bone Throne for?
    Can children use this product?
    Where can this throne be used?
1 2
34
Step 7
SET-UP AND OPERATING INSTRUCTIONS
FOR THE 5 FT BONE THRONE
SKU#1006 128 759
INSTRUCTION MANUAL
READ CAREFULLY & RETAIN FOR FUTURE REFERENCE!
A. Legs
X 4
D. Right Arm Piece
X 1
G. Seat Cushion
X 1
H. Large Screws J. Small Screws
X 6X 2
I. Plastic Screwdriver
X 1
E. Throne Back-Lower
X 1
F. Throne Back-Top
X 1
B. Seat
X 1
C. Left Arm Piece
X 1
04252021_2008482
Printed in China
Step 1
WARNING: This is not a toy and is for decorative purposes only. For indoor and outdoor use. This item
is not intended for use by children under the age of 14 years. Do not place product near an open fire or
heat source such as a radiator, stove, etc.
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-877-527-0313, 8 a.m. to 5 p.m., EST, Monday-Friday or email at
[email protected].
G
B
ASSEMBLY:
Note: Bone Throne holds up to 250 lbs
Step 2
Step 3
Step 4
Step 5
Step 6
Use the plastic screw driver (I) and
2 x large screws (H) to securely
fasten the left arm piece (C) and
the right arm piece (D) to the
throne back-lower (E) as shown.
DO NOT OVERTIGHTEN.
Use the plastic screw driver
(I) and 4 x small screws (J)
to securely fasten the left
arm piece (C) and the right
arm piece (D) to the seat (B)
as shown.
DO NOT OVERTIGHTEN
Use the plastic screw driver (I)
and 2 x small screws (J) to
securely fasten the throne
back-top (F) to the throne
back-lower (E) as shown.
DO NOT OVERTIGHTEN.
A
A
A
A
B
B
D
C
I
J
E
BB
E
B
F
F
F
E
E
E
I
Step 8
Step 9
I
J
H
Fully Assembled Product
D
Step 9
23
Step 7
G
B
Note: Bone Throne holds up to 250 lbs
Step 4
Step 5
Step 6
Use the plastic screw driver (I) and 2 x large
screws (H) to securely fasten the left arm
piece (C) and the right arm piece (D) to the
throne back-lower (E) as shown.
DO NOT OVERTIGHTEN.
Use the plastic screw driver (I) and 4 x
small screws (J) to securely fasten the
left arm piece (C) and the right arm piece
(D) to the seat (B) as shown.
DO NOT OVERTIGHTEN
Use the plastic screw driver (I) and 2
x small screws (J) to securely fasten
the throne back-top (F) to the throne
back-lower (E) as shown.
DO NOT OVERTIGHTEN.
I
J
E
BB
E
B
F
F
F
E
E
E
I
Step 8
I
J
1
Step 1
ASSEMBLY:
Step 2
Step 3
A
A
A
A
B
B
D
C
H
Fully Assembled Product
D
/