vikings MCFP-D5 Installation guide

MCFP-D5
Brand
vikings
Model
MCFP-D5
Category
Network media converters
Type
Installation guide

The vikings MCFP-D5 is a PoE Media Converter designed to convert 10/100Mbps Ethernet data over optical fiber. It supports Singlemode or Multimode, 1 or 2 fiber cores SFP modules and can power PoE PD type devices with up to 30W on cat cable, following IEEE802.3af/at standards. With its compact size and DIN rail or wall mountable design, the MCFP-D5 is suitable for various applications, including industrial automation, security surveillance, and network expansion.

The vikings MCFP-D5 is a PoE Media Converter designed to convert 10/100Mbps Ethernet data over optical fiber. It supports Singlemode or Multimode, 1 or 2 fiber cores SFP modules and can power PoE PD type devices with up to 30W on cat cable, following IEEE802.3af/at standards. With its compact size and DIN rail or wall mountable design, the MCFP-D5 is suitable for various applications, including industrial automation, security surveillance, and network expansion.

2021-11-23
QUICK INSTALLATION GUIDE
MCFP-D5 / MCGP-D5 series
Industrial PoE Ethernet Media Converter
Overview
This PoE Media Converter is designed to convert 10/100Mbps (MCFP-D5) or
10/100/1000Mbps (MCGP-D5) Ethernet data over optical fiber through
selectable SFP module options. It supports 100Mbps or 1000Mbps, Singlemode
or Multimode, 1 or 2 fiber cores SFP modules. This media converter also acts as
PoE PSE device and can power PoE PD type devices with up to 30W on cat cable,
following IEEE802.3af/at standards.
Package Contents
MCFP-D5 or MCGP-D5 Converter x 1
Wall mount bracket x 1
This Quick Installation Guide x 1
Installation
1. To install Media Converter on a DIN rail, lock the upper part of the DIN rail
clip on the upper side of the DIN rail and then gently press it until the clip is
securely locked on the track. To install it on the wall, unscrew the DIN rail clip
and replace it with included wall mount bracket and screw it on the wall.
2. Connect your network device to the RJ45 Ethernet port with a network cable.
3.
Insert the appropriate and matching SFP module into the SFP port. Connect
the fiber cable to SFP module fiber port.
4. Connect your power supply (48-57VDC range) to green 2pins power terminal
block. Follow marked polarity.
5. After the device is powered on, the PWR indicator will be on. If the indicator
is not on, check the power supply and its connection. If all cables are
correctly connected, the indicators will lit as per following LEDs status.
LEDs status
LED Color Indication
PWR Green Lit when unit is powered
100M Green Steady lit when 100Mbps link on SFP port is established,
flashing when transmitting or receiving data on SFP port
1000M
Green
Steady lit when 1000Mbps link on SFP port is established,
flashing when transmitting or receiving data on SFP port
(MCGP-D5 only)
L/A Green
Steady lit when valid network connection is established on
RJ45 port, flashing when transmitting or receiving data on
RJ45 port
PoE Yellow Steady lit when PoE is supplied to PoE device
Contact information
Vikings Technology Co. LTD.
www.vikingstechnology.com
support@vikingstechnology.com
  • Page 1 1

vikings MCFP-D5 Installation guide

MCFP-D5
Brand
vikings
Model
MCFP-D5
Category
Network media converters
Type
Installation guide

The vikings MCFP-D5 is a PoE Media Converter designed to convert 10/100Mbps Ethernet data over optical fiber. It supports Singlemode or Multimode, 1 or 2 fiber cores SFP modules and can power PoE PD type devices with up to 30W on cat cable, following IEEE802.3af/at standards. With its compact size and DIN rail or wall mountable design, the MCFP-D5 is suitable for various applications, including industrial automation, security surveillance, and network expansion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents