2. Vivotek
  3. AU-001
AU-001

Vivotek AU-001 Installation guide

  • Hello! I've reviewed the Quick Installation Guide for the VIVOTEK AU-001 Network Horn Speaker. This document covers how to install the outdoor speaker, which has PoE and is compatible with VAST2. The guide includes connection diagrams and key information such as default login credentials. I'm ready to answer your questions about the device.
  • What type of cables should I use with the AU-001 Network Horn Speaker?
    What is the default username for the AU-001?
    What is the default password for the AU-001?
(C)
Ethernet
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
Use CAT5/5e/6/6e UTP/STP cables.
Default User name: admin
Default Password: 1234
AU-001 Network Horn Speaker
Quick Installation Guide
AU-001 IP Network Horn Speaker is an outdoor speaker providing long range voice alarm to warn the intruders who can
be detected and triggered by smart VCA. It is also compatible with VAST2 for all the functionalities.
The loudspeaker has a high sound with a sensitivity of 104 dB. The AU-001 can be placed anywhere, enabling a exible,
scalable and cost-eective approach to system design. It is easy to install with built-in PoE (Power over Ethernet).
IMPORTANT:
INTRODUCTION
https://www.dropbox.com/sh/eo7e72dc1vh6vtc/AADVuNErcli6woSgWBA1RyDta?dl=0
CONNECTION
* 1x Network Horn Speaker * 1x Quick Installation Guide * 1x Cable Gland
PACKAGE CONTENTS
Pole mount bracket: AM-314
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282|F: +886-2-82455532|E: [email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298|E: [email protected]
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T: +31 (0)20 800 3817 E: [email protected]
All specications are subject to change without noice.
Copyright © 2021 VIVOTEK INC. All rights reserved.
Ground screw
PoE Out
PoE Switch
* Make sure the grounding
resistance is lower than
0.5Ω.
< 1 meter
Equip Out
Line In
#1
#2
< 1 meter
LED
Equip Out
Line In
Ground screw
* Make sure the grounding
resistance is lower than
0.5Ω.
/