Eterna VECORDL12 User manual

Hello! I've analyzed the provided document, which contains instructions for disassembling Eterna LED recessed downlights, including models VECORDL6, VECORDL12, VECORDL18, and VECORDL24. It details the removal of the LED driver, various cables, springs, and internal components like the reflector and LED tape. I'm ready to answer your questions about these disassembly procedures.
What should I do before starting disassembly?

How do I release the LED Driver?

How do I remove the mains cable?

Disassemby Products LED Recessed Downlights 1 of 1

VECORDL6

VECORDL12

VECORDL18

VECORDL24

1 2 3 4 5

6 7 8 9 10

Component Material

Driver Various

Plug Lead Assy Various

Spring Stainless Steel

Rear Cover Steel

Body Aluminium Casting

Reflector Polycarbonate

Light Guide Polycarbonate

11 12 13 Diffuser Polycarbonate

Lift out and remove Light Guide Plate and

Diffuser

LED Tape can then be removed from

Body Casting

Unsolder Connector Lead from LED Tape

Fitting must be removed from

mains power

Control Gear - LED Driver

Remove both connection covers - lever

with screwdriver

Remove Mains cable by pressing terminal

release tabs

Remove LED output cable by pressing

terminal release tabs

New LED Driver with terninal covers

removed

Twist plug/socket anticlockwise to

release LED Driver

Remove Springs x2

Remove fixing screws to take off Rear

Cover

Lift out and remove Reflector assembly