cartell CP-4 Operating instructions

Type
Operating instructions

Cartell CP-4 is a highly versatile, single-gang, 4-button keypad for use in access control, security, and automation systems. It features four programmable buttons, allowing for a variety of control options. The keypad can be used for simple on/off control, scene control, or as a 4-digit PIN pad for secure access. It also includes a built-in proximity reader for easy access control with key fobs or cards.

Cartell CP-4 is a highly versatile, single-gang, 4-button keypad for use in access control, security, and automation systems. It features four programmable buttons, allowing for a variety of control options. The keypad can be used for simple on/off control, scene control, or as a 4-digit PIN pad for secure access. It also includes a built-in proximity reader for easy access control with key fobs or cards.

CARTELL RMA/RETURN POLICY
The following constutes the return policy of Cartell:
1. Cartell prefers to deal directly with installers for technical support and returns.
It is best for installers to call 717-532-0033, opon 1 while in the eld before
uninstalling product. Have serial number, symptoms, and mulmeter handy.
Business hours are Monday - Friday, 8:30 a.m. - 5:00 p.m. Eastern me.
2. Cartell may choose to advance-replace installers product.
3. If installer, with an RMA number from Cartell, chooses to ask distributor to replace
defecve product, the laer may advance-replace the product, per its own policy.
4. Defecve products must be returned (at Cartell’s expense) directly to Cartell within
90 days. If product is not returned within that me frame, we reserve the right to
charge for the advance replacement.
5. Aer Cartell receives defecve product, we will test and determine if product has
a manufacturing defect that falls under the warranty. If product does not have a
manufacturing defect that falls under the warranty, an invoice may be issued to
cover advance replacement.
6. If a distributor has advance-replaced product for installers, and the returned
product falls under warranty and proves defecve, distributor may receive from
Cartell replacement product or be issued a credit, per distributors preference.
7. End users must contact installers for product troubleshoong and replacement.
510 West King Steet, Shippensburg, PA 17257 w 717-532-0033 w cartell.com
BAD OUT OF BOX
Cartell does 100% product tesng before products leave our factory. Therefore, it is
unlikely that a product will be bad out of box. However, if such occurs, do the following:
1. Before returning product, call Cartell immediately at 717-532-0033, opon 1.
2. Have serial number of defecve product handy. We will troubleshoot over the
phone, and determine if the product is bad out of box.
CARTELL WARRANTY
All Cartell products are warranted against defects in material and
workmanship for ve years. This warranty does not cover defects caused by,
but not limited to: acts of God, improper installaon, abuse, re damage,
electrical surges, integrated system failures, improper lid/gasket installaon,
over-ghtening screws, stripping screw holes, damage to cable caused by
slicing, pulling, tangling, improper splicing, and failure to run cable in non-
metallic conduit.
W
A
R
R
A
N
T
Y
W
A
R
R
A
N
T
Y
W
A
R
R
A
N
T
Y
Y
E
A
R
Eecve September 1, 2021
  • Page 1 1

cartell CP-4 Operating instructions

Type
Operating instructions

Cartell CP-4 is a highly versatile, single-gang, 4-button keypad for use in access control, security, and automation systems. It features four programmable buttons, allowing for a variety of control options. The keypad can be used for simple on/off control, scene control, or as a 4-digit PIN pad for secure access. It also includes a built-in proximity reader for easy access control with key fobs or cards.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI