RKI Instruments 82-5201-01 User manual

Brand: RKI Instruments

Model: 82-5201-01

Category: Power generators

Type: User manual

RKI Instruments 82-5201-01 is a versatile device capable of monitoring 4 sets of contacts, sending emails and text messages when a contact opens or closes, and even when it's powered up. With its ability to connect to a 2.4 GHz WiFi network, you can receive notifications straight to your phone or computer. Installation is simple, and the configuration can be done through a web interface.

RKI Instruments, Inc.

www.rkiinstruments.com

82-5201-01 Email/Text Generator

Operator’s Manual

Part Number: 71-0556

Revision: P9

Released: 3/16/22

82-5201-01 Email/Text Generator Operator’s Manual • 2

Product Warranty

RKI Instruments, Inc. warrants gas alarm equipment sold by us to be free from defects in

materials, workmanship, and performance for a period of one year from date of shipment from

RKI Instruments, Inc. Any parts found defective within that period will be repaired or replaced, at

our option, free of charge. This warranty does not apply to those items which by their nature are

subject to deterioration or consumption in normal service, and which must be cleaned, repaired, or

replaced on a routine basis. Examples of such items are:

Warranty is voided by abuse including mechanical damage, alteration, rough handling, or repair

procedures not in accordance with the operator’s manual. This warranty indicates the full extent

of our liability, and we are not responsible for removal or replacement costs, local repair costs,

transportation costs, or contingent expenses incurred without our prior approval.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES

AND REPRESENTATIONS, EXPRESSED OR IMPLIED, AND ALL OTHER

OBLIGATIONS OR LIABILITIES ON THE PART OF RKI INSTRUMENTS, INC.

INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL RKI

INSTRUMENTS, INC. BE LIABLE FOR INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL LOSS OR DAMAGE OF ANY KIND CONNECTED WITH THE USE

OF ITS PRODUCTS OR FAILURE OF ITS PRODUCTS TO FUNCTION OR OPERATE

PROPERLY.

This warranty covers instruments and parts sold to users by authorized distributors, dealers, and

representatives as appointed by RKI Instruments, Inc.

We do not assume indemnification for any accident or damage caused by the operation of this gas

monitor, and our warranty is limited to the replacement of parts or our complete goods.

a) Absorbent cartridges d) Batteries

b) Pump diaphragms and valves e) Filter elements

c) Fuses

3 • 82-5201-01 Email/Text Generator Operator’s Manual

Table of Contents

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Entering Configuration Mode and Initial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

WiFi Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Soft AP Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Email Client Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Calibration Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Power On and Input Emails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Overview • 4

Overview

The 82-5201-01 email/text generator is capable of monitoring 4 sets of contacts and sending out

an email and/or text message when a contact opens or closes. It can also send out an email and/or

text message when it is powered up.

The email/text generator is installed in a plastic housing that has a strain relief bushing on the

bottom. An AC/DC power supply is installed beneath the email/text generator. The power

supply’s AC input terminals are wired to a terminal strip at the bottom of the mounting plate to

make it easy to connect power at the installation site. The DC output wires are wired to the email/

text generator’s input terminals.

Figure 1: Component Location

Email/Text

Generator

DC Terminal Strip

Power Supply

Strain Relief Bushing

AC Terminal Strip

5 • Specifications

Specifications

Input Power 9 - 12 VDC

110/240 VAC

Current Draw 100 mA max

Email Broker SMTP (what most email brokers, such as Gmail and Outlook, use)

Note: Email broker must be SMTP. Password for email account cannot contain

‘&’ symbol. Outlook accounts require verification to send emails/texts to more

than one recipient.

WiFi 2.4 GHz

* Does not support 5 GHz networks, captive portal networks, or networks whose

passwords have special characters such as #$%*

Contacts 4 contact closure input ports

LED Flashing White Device is trying to connect to WiFi.

Flashing Green Device is properly connected to WiFi and is ready

for operation.

Yellow Device is booting up.

Flashing Blue 1x/second Device is in Configuration Mode and should

appear as a WiFi network on your computer,

phone, or tablet.

Flashing Blue 2x/second Device is trying to send an email and/or text.

Flashing Random Colors Device is restoring factory default settings.

Single Red Flash Email/text sending failed. It is normal for the gen-

erator to return to flashing green after 5 seconds.

Double Red Flash There is an issue with Device Settings. It is normal

for the generator to return to flashing green after 5

seconds.

Triple Red Flash WiFi connection cannot be established with con-

figured network.

Installation • 6

Installation

1. Select the mounting site. When you select the mounting site consider the following factors:

• Is an AC or DC power source available?

• Is there enough room to open the housing door and make wiring connections (see Figure

2)?

2. The mounting feet and hardware to install the mounting feet are shipped in a bag inside the

housing. Install the mounting feet as shown below.

3. Position the monitor on a vertical surface at eye level (4 1/2 to 5 feet from the floor).

4. Use 3/16” screws through the slots in the mounting feet at each corner of the housing to secure

the housing to the mounting surface.

7 • Installation

Figure 2: Dimensions

Ø 0.21 x 0.33 slot, 4X

10.439.33

5.20

5.98

Wiring • 8

Wiring

1. If using AC power:

a. Unscrew and remove the kep nuts from the AC terminal strip’s cover.

b. Route the AC wires through the strain relief bushing on the bottom of the housing.

c. Connect a line wire from the AC power source to the “H” terminal on the AC terminal

strip.

d. Connect a neutral wire from the AC power source to the “N” terminal on the AC terminal

strip.

e. Connect a ground wire from the AC power source to the “G” terminal on the AC terminal

strip.

f. Reinstall the AC terminal strip’s cover using the kep nuts.

Figure 3: AC Wiring

GNL

AC Power

Source

9 • Wiring

2. If using a 9 - 12 VDC power source:

a. Disconnect the factory-installed red and black wires from the email/text generator’s input

terminals.

b. Route the DC wires through the strain relief bushing on the bottom of the housing.

c. Connect the power source’s “+” line to the “+” terminal on the DC terminal strip.

d. Connect the power source’s “-” line to the “-” terminal on the DC terminal strip.

Figure 4: DC Wiring

3. Wire the 2 terminals for each Contact Closure Input to the contacts they are intended to

monitor.

4. Tighten the screw on the strain relief bushing to secure the wires.

5. Turn on the power source.

DC Power

Source

Configuration • 10

Configuration

Entering Configuration Mode and Initial Connection

1. Connect power to the device. If it’s the first time the device has been turned on, it will turn on

in Configuration Mode and the LED will be flashing blue. If the LED is flashing green, press

the Mode button on the right side of the device to switch to Configuration Mode using a tool

with a 90° angle.

2. Navigate to the WiFi screen on your computer, phone, or tablet and find NCD_Email.

3. The password to join the network is NCDBeast.

11 • Configuration

4. Your device may automatically launch a browser and take you to the configuration web

interface. If it does not, you may need to tap the network name again (on a phone or tablet) or

type 172.217.28.1 into a Chrome, Firefox, or Safari browser window (on a computer).

5. The device’s configuration web interface appears.

Tap again

Configuration • 12

WiFi Configuration

1. Network: Select a 2.4 GHz WiFi network from the drop down menu. The device does not

support 5 GHz networks.

2. Hidden Network: If your network does not appear, manually enter the 2.4 GHz network’s

SSID. The device does not support 5 GHz networks. Do not enter anything in the Hidden

Network field if you selected a network from the Network drop down menu.

3. Password: If your network is password-protected, enter the password. The device does not

support networks whose passwords have special characters such as #$%*. If your network is

not password-protected, leave this field blank.

4. DHCP: Select the box if the network you are connecting to is a DHCP network. Deselect the

box if you need to assign a static IP address.

NOTE: The rest of the fields are only active if DHCP is deselected.

5. Default Gateway: Enter the network’s default gateway IP.

6. Subnet Mask: Enter the network’s subnet mask IP.

7. DNS Primary: Enter a valid DNS primary server IP. The IP can match the network settings or

it can be a common DNS server. 8.8.8.8 is the IP for Google’s primary DNS lookup server.

8. DNS Secondary: Enter a valid DNS secondary server IP. The IP can match the network

settings or it can be a common DNS server. 8.8.4.4 is the IP for Google’s secondary DNS

lookup server.

9. Static IP: Enter the static IP address that you want the device to use on your network.

13 • Configuration

Soft AP Configuration

1. Soft AP SSID: While in Configuration Mode, the device acts as a WiFi access point and

broadcasts an SSID. Enter the SSID you’d like the device to broadcast.

2. Soft AP Password: Enter the password you want the device to require when trying to connect

to its WiFi access point.

Configuration • 14

Email Client Configuration

1. Host: Enter the email broker’s SMTP host address. Common addresses are smtp.gmail.com

and smtp-mail.outlook.com.

NOTE: Email broker must be SMTP.

2. Host Port: Enter the email broker’s SMTP port. Most email brokers that support SMTP

connection use port 587.

3. Login Email: Enter the email address you’d like to use to generate emails/texts.

4. Password: Enter the password used to access the email address entered in Login Email.

NOTE: The email account’s password cannot contain the ‘&’ symbol.

5. Device Name: Enter the text you want to appear in the signature of sent emails/texts.

6. Retries: Enter the number of times you want the device to attempt to send emails and/or texts

if the initial attempt is unsuccessful.

NOTE: If you are going to use a Gmail address to send emails/texts, make sure the “Allow less

secure apps” setting is selected in your Google account.

15 • Configuration

Calibration Configuration

1. Debounce Cycles: This setting defines how many CPU cycles are needed to determine a

change in status. Most contacts bounce when they first make contact and this setting prevents

those bounces from being recorded as separate events.

Do not change this setting unless recommended by RKI Instruments, Inc.

2. Input Validate: This setting defines how many milliseconds the contact must stay in a changed

state before the device sends an email and/or text. The default setting is 5000 milliseconds (5

seconds).

Power On and Input Emails/Texts

The device will generate emails and/or texts when the device powers on and/or when any of the

contacts close or open. You must make email/text settings for each event type (Power On, Input 1

Close, Input 1 Open, etc.) individually, even if they are all going to the same email address and/or

phone number. If you don’t want emails/texts sent for a particular event type, leave the fields

blank.

If you are using an Outlook account and want to send emails/texts to more than one recipient, you

will need to verify the Outlook email address the first time the email/text generator sends an

email/text. The first attempt at sending an email/text will not be successful, and Outlook will send

an email to your Outlook email address, asking you to verify your account.

Configuration • 16

1. Subject: Enter the subject title for the email/text generated from the event type. The text must

be alphanumeric and cannot contain any special characters.

2. Message Body: Enter the body for the email/text generated from the event type. The text must

be alphanumeric and cannot contain any special characters.

NOTE: The Power On message includes a WiFi signal strength percentage in addition to any

entered text.

3. Recipients: Enter the email address(es) and/or phone number(s) you want to receive emails/

texts for the event type. Separate multiple email addresses and/or phone numbers with a

comma (ie. [email protected],[email protected]). Do not add any spaces between email

addresses or phone numbers. For phone numbers, you must use a XXXXXXXXXX@______

format where the domain name used in the blank field depends on the number’s wireless

carrier.

Wireless Carrier Domain Name

AT&T txt.att.net (SMS)

mms.att.net (MMS)

Boost Mobile sms.myboostmobile.com (SMS)

myboostmobile.com (MMS)

Cricket sms.cricketwireless.net (SMS)

mms.cricketwireless.net (MMS)

17 • Configuration

Google Fi msg.fi.google.com (SMS & MMS)

Metro PCS mymetropcs.com (SMS & MMS)

Sprint messaging.sprintpcs.com (SMS)

pm.sprint.com (MMS)

T-Mobile tmomail.net (SMS & MMS)

Tracfone mmst5.tracfone.com (MMS)

U.S. Cellular email.uscc.net (SMS)

mms.uscc.net (MMS)

Verizon vtext.com (SMS)

vmpix.com (MMS)

Virgin Mobile vmobl.com (SMS)

vmpix.com (MMS)

Xfinity Mobile vtext.com (SMS)

mypixmessages.com (MMS)

Wireless Carrier Domain Name

Troubleshooting • 18

Troubleshooting

NOTE: The email/text generator is a 3rd party device. Please contact NCD at

https://community.ncd.io/ for email/text generator support.

Problem Solutions

Unable to access configura-

tion web interface

• If the LED is not flashing blue, press the Mode button on the

side of the device using a tool with a 90° angle.

• Try using a different computer, phone, or tablet.

• On a computer that is connected to the device, launch a

Chrome, Firefox, or Safari window and type in 172.217.28.1.

LED repeatedly flashes 3

times (won’t connect to

WiFi network)

• Ensure the network you are trying to connect to is a 2.4 GHz

network. The device does not support 5 GHz networks.

• Ensure the network password does not contain characters like

#$%*.

• Move the device to within 10 feet of the router/access point and

try again.

LED repeatedly flashes

twice (email/text not going

through)

• Ensure the “Allow less secure apps” setting is selected in your

Google account.

• Ensure the settings in the Email Client portion of the

configuration web interface are correct.

• Ensure the email account’s password does not contain the ‘&’

symbol.

Email/text sent but not

received

• Ensure the email is not caught by the spam filter or junk filter.

• If an Outlook account is being used, check the account’s inbox

for the account verification email from Outlook. Follow the

email’s steps on verification.

RKI Instruments 82-5201-01 User manual

Brand: RKI Instruments

Model: 82-5201-01

Category: Power generators

Type: User manual

Download PDF

report

RKI Instruments 82-5201-01 User manual

RKI Instruments 82-5201-01 User manual

Related papers

Other documents