2. pedestal
  3. Moon
Moon

pedestal Moon Installation guide

  • Hello, I've reviewed the Assembly Guide for the Pedestal Moon PRO TV stand. This guide details the steps needed to assemble your new stand, including how to mount the shelf, wheels, brackets, and finally the TV itself. I'm ready to assist with any questions you might have about the assembly process or features mentioned in the document.
  • What tools are needed for assembly?
    How do I ensure the TV brackets fit correctly?
    How do I secure the TV to the stand?
Assembly
Guide
Moon PRO
Tools
1: Wrench (Provided in the hardware bag)
2: Hex keys (Provided in the hardware bag)
3: Table
4: So cloth or blanket
5: Assiing friend
Congratulations on your new Pedeal produ.
We welcome you on our journey towards creating flexible
interior design solutions for tv-screens.
Back in the day, televisions were design objes –
beautifully made, and put on dilay. But somewhere
along the line, we began to care less about how they look.
Mo of us have a big screen at home. Personally,
we love them. We watch, zap, and binge with a single click.
But making them look good? Now, that’s a challenge.
Mounts, pods, links, ands, call them what you want.
Those things that hold your screen can really ruin your
feng shui. Seing up your screen at home can feel like
choosing between a living room — or a screening room.
So, we founded Pedeal.
We’re a small team of people who design furniture that
hold screens, inired by 20th century indurial aehetics.
They should look good and work ju right. That’s it.
You will need the tools listed below:
2
3
4
1
Moon PRO
Use the QR code or type in the URL to access our video guides.
www.pdl.com/pages/manuals
1.0 2.0Mount shelf Mount wheels
Parts Parts
Task Task
4 x M8 x 50mm bolts
4 x M8 Nuts 4 x Wheels
Mount the shelf horizontally onto both sides as shown.
Tighten all conneions.
Mount the four wheels into the boom of the feet as shown.
Make sure to place the lockable wheels in front.
Tighten all conneions.
Parts
Task
8 x M8 x 50mm bolts
8 x M8 Nuts
Mount the brackets horizontally onto both sides of the leg extenders
as shown. Make sure to orient the small threaded holes inwards.
Tighten all conneions.
3.0 Mount brackets
small threaded holes
3.1 Mount brackets detail
Task
Detailed view of ep 3.0.
Task
Task
Mount the top to the boom as shown.
Make sure to orient them correly.
Mount the top frame to the boom using the small set screws
and the smalle hex key.
Tighten all conneions.
4.0 5.0Mount top to boom Mount set screws
Parts
4 x M4 x 3 mm set screws
So far, so good Business as usual
6.0 Mount TV brackets
Parts
Task
Place your screen facing backside up on a tabletop with
a so cloth or blanket between the two in order to prote both.
Mount the TV brackets vertically using the fiing holes.
For corre fit, see ep 6.1
4 x suitably sized bolts
4 x M6/M8 washers
At lea 4 x suitably sized acers
6.1 TV brackets ing
Correct t
Incorrect t
Do not panic!
You will not need all of the remaining hardware.
The large seleion of remaining hardware is to
accommodate as many dierent screens as possible.
For a corre fit you will have to identify the right combination
of provided acers, washers and bolts.
Place the acers between the screen and the brackets
to ensure that the brackets do not touch the screen.
If for inance your screen has a curved backside, you might
have to use more than one layer of acers.
Now screw the appropriately dimensioned bolts with washers
through the brackets and acers into the threaded holes on
the backside of the screen. Tighten the bolts until you have a
snug fit. Be sure not to overtighten. The bolts mu not reach
the boom of the threaded holes. Overtightening might cause
damage to your screen.
1 2
7.0 Mount TV
Task
Hang TV on and
8.0 Mount safety hooks
Parts
Task
2 x M5 x 8 mm
Secure the TV to the and with the provided safety hooks as shown.
Tighten all conneions.
All done
www.pdl.com
/