Aaeon EMB-H110B User manual

Industrial Motherboard

EMB-H110B

ii

E14396

Revised Edition v3

May 2018

Copyright Notice

This document is copyrighted, 2017. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

®

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

®

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1 Product overview

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.4.1 Installing the CPU ........................................................... 2-7

2.4.2 CPU heatsink and fan assembly installation ................... 2-9

2.5 System memory ......................................................................... 2-11

2.5.1 Installing a DIMM .......................................................... 2-11

2.6 Jumpers ...................................................................................... 2-12

2.7 Connectors ................................................................................. 2-15

2.7.1 Rear panel connectors .................................................. 2-15

2.7.2 Internal connectors ....................................................... 2-16

2.8 Power Supply Considerations .................................................. 2-26

Chapter 3 BIOS setup

3.1 BIOS setup program .................................................................... 3-1

3.1.1 BIOS menu screen .......................................................... 3-2

3.1.2 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 CPUConguration .......................................................... 3-2

3.3.2 SATAConguration ........................................................ 3-3

3.3.3 USBConguration .......................................................... 3-3

3.3.4 PCH-FWConguration ................................................... 3-4

3.3.5 SIOConguration ........................................................... 3-4

iv

3.3.6 Hardware Monitor ........................................................... 3-5

3.3.7 Power Management ........................................................ 3-7

3.3.7 DigitalIOPortConguration ........................................... 3-8

3.4 Chipset menu ............................................................................... 3-9

3.4.1 SystemAgent(SA)Conguration ................................... 3-9

3.4.2 PCH-IOConguration ................................................... 3-10

3.5 Security menu ............................................................................ 3-10

3.5.1 Administrator Password ................................................ 3-10

3.5.2 User Password .............................................................. 3-10

3.6 Boot menu .................................................................................. 3-11

BootConguration ....................................................................... 3-11

3.7 Save & Exit menu ....................................................................... 3-12

Appendix

Notices .......................................................................................................A-1

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA cable

1 x SATA power cable

1 x I/O Shield

1 x Support CD

NOTE: If any of the above items is damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• Intel

®

Socket 1151 for 6

th

/7

th

Generation Core™ i7/Core™ i5 / Core™ i3,

Pentium

®

and Celeron

TM

Processors up to 65W

• Two 260-pin Dual Channel DDR4 2133/1867MHz SO-DIMMs up to 32GB

• 2 x SATA 6.0 Gb/s, 4 x USB3.0, 6 x USB2.0, 2 x COM header

• 1 x PCI Express 2.0 [x1]

• 1 x Full/Half-size Mini card ( default: mSATA) (PCIe +USB optional)

• 1 x Half-size Mini card

• Multi Display: HDMI, (DP optional by BOM change), LVDS, eDP

Chapter 1

Product overview

EMB-H110B

1-2

1.3 Specifications

SYSTEM

CPU

LGA1151 socket for Intel

®

6

th

/7

th

Generation Core™ i7 / Core™ i5 /

Core™ i3, Pentium

®

/ Celeron

®

processors

Supports Intel

®

CPU Max. 65W TDPs

Chipset

Intel

®

H110 Express Chipset

Memory

2 x SO-DIMM, max. 32GB, non-ECC DDR4 2133 / 1867 MHz

Dual-channel memory architecture

Graphics

Intel

®

HD Graphics

I/O Chipset

NCT6791D

Storage

2 x SATA 6Gb/s

Ethernet

2 x Realtek

®

8111G PCIe Gigabit LAN

Audio

Realtek

®

ALC887 with Amp.

TPM

InneonSLB96XXTT1.2/2.0(default:No)

Expansion slots

1 x PCI Express 2.0 [x1] slot (Gen 2)

1 x Half size Mini Card (PCIe +USB)

1 x Full/Half size Mini Card (default: mSATA) (PCIe +USB optional)

BIOS

64Mbit Flash ROM, AMI BIOS

H/W Monitor

Temperature monitor on CPU/Chassis

Voltage Monitor on Vcore/5V/12V

Fan Monitor on CPU/Chassis

Watchdog Timer

1~255 steps by software program

Wake on LAN

Yes(WOL/PXE)(PXEonlysupportwithLAN1)

Smart Fan Control

CPU Fan(3.3V PWM control) / Chassis Fan

Power State

S3, S4, S5

GRAPHICS

Graphics Chipset

Intel

®

HD Graphics

Graphics Multi-

Display

2HDMI+LVDS, 2HDMI+eDP, HDMI+LVDS+eDP; both 2HDMI

coulbe be replaced with DP by BOM change

HDMI

Up to 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz, with Digital

Audio

DisplayPort

Up to 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz, with Digital

Audio

LVDS/eDP

LVDS Up to 1920 x 1200 @60 Hz, Dual Channel 18/24 bit,

eDP UP to 4096 x 2340 @ 60Hz

Backlight Control

Voltage / PWM

(continued on the next page)

1-3

Chapter 1: General information

I/O

Storage

2 x SATA 6Gb/s

1 x Full size Mini Card (SATA 6Gb/s)

4 pin SATA power (5V, 12V @1A)

USB

4 x USB 3.0 ports (4 ports in Rear IO)

6 x USB 2.0 ports (4 ports at mid board, 2 port for mini card)

Display I/O

1 x LVDS, 1 x eDP, 2 x HDMI (DP optional by BOM change)

Audio I/O

Mic-in, Line-out, AAFP at internal connector for 2 additional channel

(default Line-out, Mic-in), speaker

LAN I/O

2 x RJ-45

Serial port

1 x RS-232 (mid board)

1 x RS-232/422/485 supports 5V/12V/RI option (mid board)

DIO

8-bit Digital I/O interface (4-in/4-out)

FAN

1 x CPU Fan connector (4-pin)

1 x Chassis Fan connector (4-pin)

ENVIRONMENT, POWER, & ME

Battery

Lithium battery

Power requirement

DC input: +12 (± 5%) VDC

Back Panel DC jack (5.5/2.5mm)

4-pin internal power connector

NOTE:Pleaseusexedvoltagepowersupply.

Operating

Temperature

0~60°C

Operating Humidity

0% ~ 90%RH, non-condensing

Certificate

CE & FCC (Class A)

Form Factor

MiniITXFormFactor,6.7”x6.7”(170mmx170mm)

Weight

1.1 lb (0.5 Kg)

PLACEMENT

Back I/O ports

1 x DC Jack

1 x HDMI / DP (HDMI and DP colay; default: HDMI)

2 x LAN (RJ45)

4 x USB 3.0

1 x Audio jacks (Mic-In) pink connector

1 x Audio jacks (Line-Out) green connector

(continued on the next page)

EMB-H110B

1-4

PLACEMENT

Internal I/O

connectors

1 x PCIe[x1] Slot

1 x Full/Half-size Mini Card slot

2 x SATA 6Gb/s

2 x USB 2.0 connectors support additional 4 USB ports (2.00 mm)

2 x boxer header for COM (COM1: RS-232/422/485 supports

5V/12V/RI; COM2: RS-232)

1 x LVDS connector (Top side)

1 x eDP connector (Bottom side)

1 x Panel 3.3V /5V jumper

1 x Panel backlight DC / PWM mode jumper

1 x Panel backlight connector (inverter)

1 x Panel backlight 12V /5V jumper

1 x Digital I/O box header

1 x 4 PIN (2x2) internal power connector

1 x 4 PIN CPU Fan connector

1 x 4 PIN Chassis Fan connector

1 x Front Panel connector

1 x AAFP

1xSpeakerfor2W/4Ω

1 x Chassis Intrusion follow ASUS pin out

1 x Buzzer on board (Pin Header)

1xAT/ATXmodeselectjumper

1 x clear CMOS jumper

OTHERS

OS Support

Windows

®

7 32 bit / 64 bit (not supported when a Kaby Lake processor is

used)

Windows

®

8.1 32 bit / 64 bit (not supported when a Kaby Lake processor

is used)

Windows

®

10 64 bit

Linux Fedora

Accessories

1 x SATA cable

1 x SATA power cable

I/O Shield

Support DVD

NOTE: Specicationsaresubjecttochangewithoutnotice.

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,alwaysremovetheACpower

by unplugging the power cord from the power outlet. Failure to do so may

causeseveredamagetothemotherboard,peripherals,orcomponents.

Standby Power LED

The motherboard comes with a standby power LED that lights up to indicate that

thesystemisON,insleepmode,orinsoft-offmode.Thisisareminderthatyou

shouldshutdownthesystemandunplugthepowercablebeforeremovingor

plugging in any motherboard component. The illustration below shows the location

of the onboard LED.

EMB-H110B

EMB-H110B Onboard LEDs

LED_5VSUS

ON

Standby Power Powered Off

OFF

LED_5V

ON

Main Power Main Power Off

OFF

EMB-H110B

2-2

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

EMB-H110B

EATX_PWR2

EATX_PWR1

USB3_12

USB3_34

LAN2

LAN1

CLRTC

RTL

8111G

17.0cm(6.7in)

SATA6G_2SATA6G_1

F_PANEL

SPEAKER

CHASSIS

USB78USB56

CHA_FAN1 CPU_FAN1

DDR4 DIMM_A1 (64bit, 260-pin module)

DDR4 DIMM_B1 (64bit, 260-pin module)

INV

LJ2

LJ1

LJ3

DIOCOM2COM1

COM_V

LVDS

BOTTOM:EDP

DP1

or

HDMI1

DP2

or

HDMI2

SATA_PWR

ALC

887

RT3607CE

BIOS_P

Intel

®

H110

Super

I/O

PCIEX1_1

MINICARD1

MINICARD2

CH7511

LGA1151

LINE-OUT

MIC-IN

AMP_CON

AAFP

BATTERY_H

LED_+5V

LED_+5VSUS

128Mb

BIOS

8 9763 41 2

16

15

11

10

13

14

1920 18 17

24

25

26

18

2123 22

5

12

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. EATXpowerconnector(4-pinEATX_PWR2) 2-24

2. CPUandchassisfanconnectors(4-pinCPU_FAN1,4-pinCHA_FAN1) 2-17

3. SerialATA6.0Gb/sconnectors(7-pinSATA6G_1/2) 2-19

4. COM1Ring/+5V/+12Vselection(COM1_V) 2-13

5. Serialportconnectors(10-pinCOM1,COM2) 2-23

6. DigitalI/Oconnector(10-pinDIO) 2-18

7. DDR4SO-DIMMslots 2-11

8. InverterBacklightControlmodeselection(3-pinLJ3) 2-14

9. Invertervoltageselection(3-pinLJ2) 2-13

10. LVDSpanelvoltageselection(3-pinLJ1) 2-13

11. Backlightinverterpowerconnector(5-pinINV) 2-22

12. EmbeddedDisplayPort(40-pinEDP) 2-24

13. LVDSconnector(40-pinLVDS) 2-17

14. ClearRTCRAM(CLRTC) 2-12

15. Chassisintrusionconnector(4-1pinCHASSIS) 2-18

16. Intel

®

LGA1151CPUsocket 2-6

17. SPIashprogrammableconnector(8-pinBIOS_P) 2-22

18. Full/HalfsizeMiniCard(mSATA)(MINICARD2)

HalfsizeMiniCard(PCIe+USB)(MINICARD1)

2-20

19. Frontpanelsystempanelconnector(10-1pinF_PANEL) 2-19

20. Speakerconnector(4-pinSPEAKER) 2-20

21. StandbypowerLEDs(LED_+5V,LED_+5VSUS) 2-1

22. Batteryconnector(2-pinBATTERY_H) 2-22

23. Audioamplierconnector(4-pinAMP_CON) 2-16

24. Frontpanelaudioconnector(10-1pinAAFP) 2-25

25. SATApowerconnector(4-pinSATA_PWR) 2-16

26. USB2.0connectors(10-pinUSB56,USB78) 2-21

EMB-H110B

2-4

2.3 Screw size

2.3.1 Component side

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

EMB-H110B

2-6

IMPORTANT:UnplugallpowercablesbeforeinstallingtheCPU.

CAUTION!

• Uponpurchaseofthemotherboard,ensurethatthePnPcapison

thesocketandthesocketcontactsarenotbent.Contactyourretailer

immediatelyifthePnPcapismissing,orifyouseeanydamagetothe

PnPcap/socketcontacts/motherboardcomponents.Themanufacturerwill

shoulderthecostofrepaironlyifthedamageisshipment/transit-related.

• Keepthecapafterinstallingthemotherboard.Themanufacturerwill

processReturnMerchandiseAuthorization(RMA)requestsonlyifthe

motherboardcomeswiththecapontheLGA1151socket.

• Theproductwarrantydoesnotcoverdamagetothesocketcontacts

resultingfromincorrectCPUinstallation/removal,ormisplacement/loss/

incorrectremovalofthePnPcap.

2.4 Central Processing Unit (CPU)

ThemotherboardcomeswithasurfacemountLGA1151socketdesignedforthe

Intel

®

6

th

/7

th

GenerationCore™i7/Core™i5/Core™i3,Pentium

®

/Celeron

®

processors.

EMB-H110B

EMB-H110B CPU socket LGA1151

2-7

Chapter 2: Motherboard information

2.4.1 Installing the CPU

1

A

B

2 3

CAUTION!LGA1156CPUisnotcompatiblewiththeLGA1151socket.DO

NOTinstallanLGA1156CPUontheLGA1151socket.

EMB-H110B

2-8

A

B

C

4

5

2-9

Chapter 2: Motherboard information

2.4.2 CPU heatsink and fan assembly installation

CAUTION!ApplytheThermal

InterfaceMaterialtotheCPU

heatsinkandCPUbeforeyou

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

1

2

3 4

EMB-H110B

2-10

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-11

Chapter 2: Motherboard information

2.5 System memory

ThismotherboardcomeswithtwoDoubleDataRate4(DDR4)SmallOutlineDualInline

MemoryModule(SO-DIMM)sockets.ThegurebelowillustratesthelocationoftheDDR4

SO-DIMMsockets:

Channel Sockets

ChannelA SO-DIMM_A1

ChannelB SO-DIMM_B1

2.5.1 Installing a DIMM

3

To install a DIMM

To remove a DIMM

3

EMB-H110B

EMB-H110B 260-pin DDR4 SO-DIMM sockets

DIMM_B1

DIMM_A1

EMB-H110B

2-12

2.6 Jumpers

1. Clear RTC RAM (CLRTC)

ThisjumperallowsyoutocleartheRealTimeClock(RTC)RAMinCMOS.

YoucancleartheCMOSmemoryofsystemsetupparametersbyerasing

theCMOSRTCRAMdata.TheonboardbuttoncellbatterypowerstheRAM

datainCMOS,whichincludesystemsetupinformationsuchassystem

passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Movethejumpercapfrompins1-2(default)topins2-3.Keepthecapon

pins2-3forabout5~10seconds,thenmovethecapbacktopins1-2.

3. Plug the power cord and turn ON the computer.

4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetup

to reenter data.

CAUTION!ExceptwhenclearingtheRTCRAM,neverremovethecapon

CLRTCjumperdefaultposition.Removingthecapwillcausesystemboot

failure!

NOTES:

• Ifthestepsabovedonothelp,removetheonboardbatteryandmovethe

jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,

reinstall the battery.

• YoudonotneedtocleartheRTCwhenthesystemhangsdueto

overclocking.Forsystemfailureduetooverclocking,usetheCPU

ParameterRecall(C.P.R)feature.Shutdownandrebootthesystemsothe

BIOScanautomaticallyresetparametersettingstodefaultvalues.

EMB-H110B

EMB-H110B Clear RTC RAM

1 2

2 3

RTC Batt.

(Default)

Clear CMOS

CLRTC1

Page is loading ...

Aaeon EMB-H110B User manual

Related papers

Other documents