Garmin 010-02228-00 Owner's manual

Category
Car navigation systems
Type
Owner's manual

This manual is also suitable for

CAMPER 785 / RV 785 / RV 700
Owner’s Manual
© 2019 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of
Garmin.
Garmin Drive
, Garmin Express
, and myTrends
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
ACSI
is a trademark of Auto Camper Service International Holding B.V. Android
is a trademark of Google Inc. Apple
®
, iPhone
®
, and Mac
®
are trademarks of Apple Inc, registered in the U.S.
and other countries. The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. Foursquare
®
is a trademark of
Foursquare Labs, Inc. in the U.S. and in other countries. HISTORY
®
and the H logo are trademarks of A+E Networks and are protected in the United States and other countries around the globe.
All Rights Reserved. Used with Permission. microSD
®
and the microSDHC logo are trademarks of SD-3C, LLC. PlanRV
is the trademark of TruckDown Info International, Inc. TripAdvisor
®
is a
registered trademark of TripAdvisor LLC. WiFi
®
is a registered mark of Wi-Fi Alliance Corporation. Windows
®
is a registered trademark of Microsoft Corporation in the United States and other
countries.
Table of Contents
Getting Started............................................................... 1
Garmin® Overview..................................................................... 1
Mounting and Powering the Garmin Device in Your Vehicle...... 1
Turning the Device On or Off...................................................... 1
Acquiring GPS Signals............................................................... 2
Home Screen.............................................................................. 2
Opening an App..................................................................... 2
Adding Shortcuts to the Home Screen.................................. 2
Viewing Notifications.............................................................. 2
Status Bar Icons.....................................................................2
Using the Touchscreen............................................................... 2
Adjusting the Screen Brightness................................................ 2
Vehicle Profiles............................................................... 2
Adding a Vehicle Profile..............................................................3
Car Profile................................................................................... 3
Switching the Vehicle Profile...................................................... 3
Editing a Vehicle Profile.............................................................. 3
Adding Propane Tanks.......................................................... 3
Dash Cam........................................................................ 3
Aligning the Camera................................................................... 3
Dash Cam Controls.................................................................... 3
Dash Cam Recording.............................................................3
Saving a Dash Cam Recording..............................................3
Turning Audio Recording On or Off....................................... 4
Using the Dash Cam Gallery...................................................... 4
Dash Cam Videos on Your Computer........................................ 4
Viewing Videos and Photos on Your Smartphone...................... 4
Deleting a Video or Photo Using Your Smartphone.............. 4
Trimming and Exporting a Video............................................4
Replacing the Dash Cam Memory Card..................................... 4
Formatting the Dash Cam Memory Card............................... 4
Driver Awareness Features and Alerts........................ 4
Enabling or Disabling Driver Alerts............................................. 5
Red Light and Speed Cameras.................................................. 5
Advanced Driver Assistance System.......................................... 5
Forward Collision Warning System........................................ 5
Lane Departure Warning System...........................................6
Warning and Alert Symbols........................................................ 6
Restriction Warnings.............................................................. 6
Road Condition Warnings...................................................... 6
Alerts...................................................................................... 6
Finding and Saving Locations...................................... 6
Finding a Location Using the Search Bar................................... 7
Finding an Address..................................................................... 7
Location Search Results............................................................. 7
Changing the Search Area.................................................... 7
Location Search Results on the Map..................................... 7
Changing the Search Area Using the Map............................ 8
Points of Interest......................................................................... 8
Finding a Location by Category............................................. 8
Finding Campgrounds............................................................8
Finding RV Services.............................................................. 8
Finding National Parks........................................................... 8
Finding HISTORY Points of Interest...................................... 8
Foursquare.............................................................................8
TripAdvisor............................................................................. 9
Navigating to Points of Interest Within a Venue.................... 9
Search Tools...............................................................................9
Finding an Intersection...........................................................9
Finding a Location Using Coordinates................................... 9
Parking........................................................................................9
Finding Parking Near Your Current Location......................... 9
Finding Parking Near a Specified Location............................ 9
Understanding Parking Colors and Symbols
....................... 10
Viewing Recently Found Locations.......................................... 10
Clearing the List of Recently Found Locations.................... 10
Viewing Current Location Information...................................... 10
Finding Emergency Services and Fuel................................ 10
Getting Directions to Your Current Location........................ 10
Adding a Shortcut..................................................................... 10
Removing a Shortcut........................................................... 10
Saving Locations...................................................................... 10
Saving a Location................................................................ 10
Saving Your Current Location.............................................. 10
Editing a Saved Location..................................................... 10
Assigning Categories to a Saved Location.......................... 10
Deleting a Saved Location................................................... 10
Following a Route.........................................................10
Routes...................................................................................... 10
Starting a Route........................................................................ 11
Starting a Route by Using the Map...................................... 11
Going Home......................................................................... 11
Your Route on the Map............................................................ 11
Active Lane Guidance.......................................................... 11
Viewing Turns and Directions.............................................. 11
Viewing the Entire Route on the Map.................................. 11
Arriving at Your Destination...................................................... 12
Parking Near Your Destination............................................ 12
Changing Your Active Route.................................................... 12
Adding a Location to Your Route......................................... 12
Shaping Your Route.............................................................12
Taking a Detour................................................................... 12
Changing the Route Calculation Mode................................ 12
Stopping the Route................................................................... 12
Using Suggested Routes.......................................................... 12
Avoiding Delays, Tolls, and Areas............................................ 12
Avoiding Traffic Delays on Your Route................................ 12
Avoiding Toll Roads............................................................. 13
Avoiding Toll Stickers...........................................................13
Avoiding Road Features...................................................... 13
Avoiding Environmental Zones............................................ 13
Custom Avoidances............................................................. 13
Navigating Off Road................................................................. 13
Using the Map............................................................... 13
Map Tools................................................................................. 13
Viewing a Map Tool............................................................. 14
Up Ahead.................................................................................. 14
Viewing Upcoming Locations............................................... 14
Customizing the Up Ahead Categories................................ 14
Cities Ahead............................................................................. 14
Viewing Upcoming Cities and Exit Services........................ 14
Trip Information.........................................................................14
Viewing Customized Trip Information on the Map............... 14
Viewing the Trip Information Page....................................... 14
Viewing the Trip Log............................................................ 14
Resetting Trip Information....................................................14
Viewing Upcoming Traffic......................................................... 15
Viewing Traffic on the Map.................................................. 15
Searching for Traffic Incidents............................................. 15
Customizing the Map................................................................ 15
Customizing the Map Layers............................................... 15
Changing the Map Data Field.............................................. 15
Changing the Map Perspective............................................ 15
Live Services, Traffic, and Smartphone Features..... 15
Pairing with Your Smartphone.................................................. 15
Enabling or Disabling Bluetooth Features........................... 15
Pairing Additional Bluetooth Devices................................... 16
Smart Notifications....................................................................16
Table of Contents i
Receiving Notifications.........................................................16
Viewing the List of Notifications........................................... 16
Hands-Free Calling................................................................... 16
Placing a Call....................................................................... 16
Receiving a Call................................................................... 16
Using In-Call Options........................................................... 16
Saving a Phone Number as a Preset.................................. 16
Disconnecting a Bluetooth Device............................................ 17
Deleting a Paired Bluetooth Device.......................................... 17
Traffic............................................................................ 17
Receiving Traffic Data Using Your Smartphone....................... 17
Receiving Traffic Data Using a Traffic Receiver....................... 17
Enabling Traffic......................................................................... 17
Voice Command........................................................... 17
Setting the Wakeup Phrase...................................................... 17
Activating Voice Command.......................................................17
Voice Command Tips............................................................... 18
Starting a Route Using Voice Command.................................. 18
Muting Instructions....................................................................18
Using the Apps............................................................. 18
Viewing the Owner's Manual on Your Device........................... 18
Viewing the Weather Forecast..................................................18
Viewing Weather Near a Different City................................ 18
Viewing the Weather Radar................................................. 18
Viewing Weather Alerts........................................................18
Checking Road Conditions.................................................. 18
Logging Service History............................................................ 18
Adding Service Categories.................................................. 18
Deleting Service Categories................................................ 18
Renaming Service Categories............................................. 19
Deleting Service Records.................................................... 19
Editing a Service Record..................................................... 19
Trip Planner.............................................................................. 19
Planning a Trip..................................................................... 19
Editing and Reordering Locations in a Trip.......................... 19
Discovering Attractions Along Your Trip.............................. 19
Changing Routing Options for a Trip................................... 19
Navigating to a Saved Trip...................................................19
Editing and Saving Your Active Route................................. 19
photoLive Traffic Cameras........................................................19
Viewing and Saving photoLive Traffic Cameras.................. 19
Viewing photoLive Traffic Cameras on the Map.................. 20
Saving a Traffic Camera...................................................... 20
Viewing Previous Routes and Destinations.............................. 20
Settings......................................................................... 20
Navigation Settings................................................................... 20
Map and Vehicle Settings.................................................... 20
Route Preference Settings................................................... 20
Driver Assistance Settings................................................... 20
Traffic Settings..................................................................... 20
Dash Cam Settings................................................................... 20
Enabling Bluetooth Wireless Technology................................. 21
Connecting to a Wireless Network............................................21
Display Settings........................................................................ 21
Sound and Notification Settings............................................... 21
Adjusting Sound and Notification Volume............................ 21
Enabling or Disabling Location Services.................................. 21
Setting the Text Language....................................................... 21
Date and Time Settings............................................................ 21
Device Settings......................................................................... 21
Restoring Settings.................................................................... 21
Resetting Data and Settings..................................................... 21
Device Information....................................................... 22
Viewing E-label Regulatory and Compliance Information........ 22
Specifications
............................................................................22
Charging the Device................................................................. 22
Device Maintenance..................................................... 22
Garmin Support Center.............................................................22
Map and Software Updates...................................................... 22
Updating Maps and Software Using a WiFi Network.......... 22
Updating Maps and Software with Garmin Express............ 22
Device Care.............................................................................. 23
Cleaning the Camera Lens.................................................. 23
Cleaning the Outer Casing...................................................23
Cleaning the Touchscreen................................................... 23
Avoiding Theft...................................................................... 23
Restarting the Device............................................................... 23
Removing the Device, Mount, and Suction Cup....................... 23
Removing the Mount from the Suction Cup......................... 23
Removing the Suction Cup from the Windshield................. 23
Appendix....................................................................... 24
Backup Cameras...................................................................... 24
Connecting a Wired Backup Camera...................................24
Pairing a BC™ 35 Backup Camera with a Garmin Navigation
Device.................................................................................. 24
Viewing the Backup Camera................................................24
Connecting to a Wireless Display............................................. 24
Data Management.................................................................... 24
About Memory Cards........................................................... 24
Installing a Memory Card for Maps and Data...................... 24
Connecting the Device to Your Computer........................... 24
Transferring Data From Your Computer.............................. 24
Power Cables........................................................................... 25
Charging the Device............................................................ 25
Changing the Fuse in the Vehicle Power Cable.................. 25
Installing the RV Charging Station Accessory.......................... 25
Removing the Device, Mount, and Suction Cup....................... 26
Removing the Device from the Mount..................................26
Removing the Mount from the Suction Cup......................... 26
Removing the Suction Cup from the Windshield................. 26
Purchasing Additional Maps..................................................... 26
Purchasing Accessories........................................................... 26
Troubleshooting........................................................... 26
The suction cup will not stay on my windshield........................ 26
The mount does not hold my device in place while I drive....... 26
My device is not acquiring satellite signals............................... 26
The device does not charge in my vehicle............................... 26
My battery does not stay charged for very long........................ 26
My video recordings are blurry................................................. 26
My memory card has degraded and needs to be replaced...... 26
My video recordings are choppy or incomplete........................ 27
My device does not connect to my phone................................ 27
Some smartphone features do not work................................... 27
Index.............................................................................. 28
ii Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Install the camera memory card (Replacing the Dash Cam
Memory Card, page 4).
Update the maps and software on your device (Map and
Software Updates, page 22).
Mount the device in your vehicle and connect it to power
(Mounting and Powering the Garmin Device in Your Vehicle,
page 1).
Align the dash camera (Aligning the Camera, page 3).
Acquire GPS signals (Acquiring GPS Signals, page 2).
Adjust the volume (Garmin
®
Overview, page 1) and display
brightness (Adjusting the Screen Brightness, page 2).
Set up a vehicle profile for your camper (Adding a Vehicle
Profile, page 3).
Navigate to your destination (Starting a Route, page 11).
Garmin
®
Overview
Microphone for hands-free calling
Microphone for dash camera recording
Volume control
Camera
Power key
Micro USB power and data port
Map and data memory card slot
3.5mm audio jack
Magnetic mount interface with 14 pin connector
Speaker
Dash cam memory card below access panel (Replacing the Dash
Cam Memory Card, page 4)
Mounting and Powering the Garmin Device
in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause interference with some
internal medical devices, including pacemakers and insulin
pumps. Keep the device and its mount away from such medical
devices.
NOTICE
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause damage to some electronic
devices, including hard drives in laptop computers. Use caution
when the device or its mount is near electronic devices.
Before you use your device on battery power, you should charge
it.
1
Plug the vehicle power cable into the mini-USB port on the
mount.
2
Press the mount onto the suction cup until it snaps into
place.
NOTE: The mount and suction cup may already be
assembled in the package.
The Garmin logo on the mount should face right-side up. It is
easiest to connect the mount and suction cup when the
hinged arm on the suction cup is closed. The mount and
suction cup fit tightly, and you may need to press hard to
connect them.
3
Press the suction cup to the windshield, and flip the lever
back toward the windshield.
4
Place the back of the device onto the magnetic mount.
5
Select an option:
If your power cable has a vehicle power plug, plug it into a
power outlet in your vehicle.
If your power cable has bare wire connectors, follow the
wiring diagram included with your cable to connect the
cable to vehicle power.
Turning the Device On or Off
To turn the device on, press the power key , or connect the
device to power.
Getting Started 1
To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Power Off.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Verify appears in the status bar, and enable location
services if it does not.
3
If necessary, go to an open area with a clear view of the sky,
away from tall buildings and trees.
Acquiring Satellites appears at the top of the navigation map
until the device determines your location.
Home Screen
NOTE: The home screen layout may vary if it has been
customized.
Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight
brightness.
Hold to customize the wallpaper or add widgets to the home
screen.
Select to open the app drawer. The app drawer contains shortcuts
to all the apps installed on your device.
Opening an App
The home screen contains shortcuts for frequently used apps.
The app drawer contains all the apps installed on your device,
organized into two tabs. The Navigation tab contains Garmin
apps useful for navigation, dispatching, and hours of service
recording. The Tools tab contains apps useful for
communication and other tasks.
Select an option to open an app:
Select an app shortcut from the home screen.
Select , select a tab, and select an app.
Adding Shortcuts to the Home Screen
1
Select .
2
Select an app tab to view additional applications.
3
Hold an application, and drag it to a location on the home
screen.
Viewing Notifications
1
Swipe down from the top of the screen.
The list of notifications appears.
2
Select an option:
To launch the action or app mentioned in the notification,
select the notification.
To dismiss a notification, swipe the notification to the right.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device.
Location services is enabled.
Bluetooth
®
technology is enabled.
Connected to a Bluetooth device.
Connected to a WiFi
®
network (Connecting to a Wireless Network,
page 21).
Active vehicle profile. Swipe down twice and select to view the
vehicle profile settings.
Battery charge level.
Using the Touchscreen
Tap the screen to select an item.
Drag or swipe your finger across the screen to pan or scroll.
Pinch two fingers together to zoom out.
Spread two fingers apart to zoom in.
Adjusting the Screen Brightness
The device uses an ambient light sensor to adjust the screen
brightness to your vehicle conditions automatically. You can also
adjust the brightness manually, using either the notification
panel or the settings menu.
1
Select an option:
Swipe down twice from the top of the screen to expand
the quick settings in the notification panel.
Select Settings > Display > Brightness Level.
2
Use the slider bar to adjust the brightness.
Vehicle Profiles
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customized separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
2 Vehicle Profiles
Adding a Vehicle Profile
You should add a vehicle profile for each camper to be used
with your device.
1
Select Vehicle.
2
Select your vehicle type:
To add a motorhome with a permanently attached
camper, select Motorhome.
To add a motorhome pulling a trailer, select Motorhome
with Trailer.
To add a camper pulled behind a passenger vehicle,
select Vehicle with Trailer.
3
If necessary, select your trailer type:
To add a camper pulled using a standard hitch, select
Travel Trailer.
To add a camper pulled using a fifth-wheel hitch, select
Fifth Wheel.
NOTE: This trailer type is not available in all areas.
To add a boat trailer pulled using a standard hitch, select
Boat Trailer.
To add a trailer pulled using a standard hitch, select
Trailer.
4
Follow the on-screen instructions to enter the vehicle
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information (Editing a Vehicle Profile,
page 3).
Car Profile
The car profile is a preloaded vehicle profile intended for use in
an automobile without a trailer. While using the car profile, the
device calculates standard automobile routes, and routing for
large vehicles is not available. Some features and settings
specific to large vehicles are not available while using the car
profile.
Switching the Vehicle Profile
You can manually switch to another vehicle profile at any time.
1
Select an option:
Select Vehicle.
Swipe down twice from the top of the screen, and select
the vehicle profile icon, such as or .
2
Select a vehicle profile.
The vehicle profile information appears, including
measurements and weight.
3
Select Select.
Editing a Vehicle Profile
You can change basic vehicle profile information or add detailed
information to a vehicle profile, such as maximum speed.
1
Select Vehicle.
2
Select the vehicle profile to edit.
3
Select an option:
To edit the vehicle profile information, select , and select
a field to edit.
To rename a vehicle profile, select > > Rename
Profile.
To delete the vehicle profile, select > > Delete.
Adding Propane Tanks
NOTE: This feature is not available on all product models.
When you add your propane tanks to your vehicle profile, the
device avoids routing through areas with propane tank
restrictions that may affect your route. The device also alerts
you when you approach areas that require you to shut off your
propane tanks.
1
From the vehicle profile, select > Propane Tanks > Add
Tank.
2
Enter the weight of the propane tank, and select Save.
Dash Cam
Aligning the Camera
WARNING
Do not attempt to align the camera while driving.
You should align the dash camera each time you mount or
reposition the device.
1
Select Dash Cam.
2
Tilt the device to align the camera.
The crosshairs should point straight ahead, and the horizon
line should be centered between the top and bottom of the
screen.
TIP: If the suction cup appears in the dash cam field of view,
you should move the hinged arm toward the suction cup.
Dash Cam Controls
NOTICE
Some jurisdictions regulate or prohibit use of this device. It is
your responsibility to know and comply with applicable laws and
rights to privacy in jurisdictions where you plan to use this
device.
You can control the dash cam using either the dash cam app or
the notification panel.
Select > Dash Cam, or swipe down from the top of the
screen.
Select to save a dash cam recording.
Select to stop dash cam recording.
Select to start dash cam recording.
Select to enable audio recording.
Select to disable audio recording.
Dash Cam Recording
While the dash cam is recording, it records continuously,
overwriting the oldest, non-saved video.
You can start and stop dash cam recording using the dash
cam controls (Dash Cam Controls, page 3).
If you enable the Auto Record option (Dash Cam Settings,
page 20), the dash cam starts recording automatically when
the device receives power through the powered mount. This
is most useful when the mount is connected to an ignition
switched power source.
When the device is removed from the mount or the mount
loses power, the dash cam stops recording automatically
after a 15 second delay.
Saving a Dash Cam Recording
You can save a portion of the recorded video to prevent it from
being overwritten by new video.
1
While the dash cam is recording, select > Dash Cam > .
The device saves the video footage before, during, and after
you select .
2
Select again to extend the saved recording time (optional).
A message indicates the amount of video footage to be
saved.
Dash Cam 3
The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Dash
Cam Videos on Your Computer, page 4).
Turning Audio Recording On or Off
NOTICE
Some jurisdictions may regulate or prohibit recording audio with
this device. It is your responsibility to know and comply with
applicable laws and rights to privacy in jurisdictions where you
plan to use this device.
The device can record audio using the integrated microphone
while recording video. You can turn audio recording on or off at
any time.
1
Select > Dash Cam.
2
Select or .
Using the Dash Cam Gallery
You can use the dash cam gallery to view recorded dash cam
video, delete unneeded videos, and save a clip from the
unsaved video footage.
NOTE: The device stops recording video while you view videos.
1
Select > Dash Cam Gallery > OK.
2
Select a saved video, or select Unsaved.
The video starts playing automatically.
3
Select an option:
To save a clip of unsaved video footage, use the slider to
select the video segment to save, and select .
The device saves the segment of video between the
orange pointers on the slider.
To delete a video, select .
Dash Cam Videos on Your Computer
Videos and photos are stored in the DCIM folder on the camera
memory card. Videos are stored in MP4 file format, and photos
are stored in JPG format. You can view and transfer photos and
videos by connecting the memory card or the device to your
computer (Connecting the Device to Your Computer, page 24).
The videos and photos are sorted into several folders.
100EVENT: Contains videos saved automatically when the
device detected an incident.
101SAVED: Contains videos saved manually by the user.
104UNSVD: Contains unsaved video footage. The device
overwrites the oldest unsaved video when the storage space
for unsaved video is full.
Viewing Videos and Photos on Your
Smartphone
Before you can view videos and photos on your smartphone,
you must pair your Garmin device with the Garmin Drive
app
(Pairing with Your Smartphone, page 15).
NOTE: The device stops recording and alerts are disabled while
viewing videos or photos.
1
From the Garmin Drive app on your smartphone, select
Review Footage.
2
Select an option:
To view a photo or video you saved, select a file from the
Saved Footage category.
To view recent video footage that has not been saved,
select a video from the Temporary Footage category.
Deleting a Video or Photo Using Your Smartphone
1
When you are viewing the list of saved videos or photos on
your smartphone, select Select.
2
Select one or more files.
3
Select .
Trimming and Exporting a Video
You can trim the length of your video to remove unnecessary
footage before exporting it.
1
From the Garmin Drive app, select Review Footage.
2
Select a video.
3
Drag the handles on the video progress bar left or right to
trim the video length.
4
Select Export.
NOTE: You must keep the app in the foreground when
exporting a video.
The app exports the trimmed video to your smartphone.
Replacing the Dash Cam Memory Card
You can replace the dash cam memory card to increase the
storage capacity or to replace a card that has reached the end
of its useful life. The dash cam requires a microSD
®
memory
card from 4 to 64 GB with a speed rating of Class 10 or higher.
1
Press on the two marked areas, and slide the back panel
down to open it.
2
Locate the memory card slot .
3
Press the existing memory card in until it clicks, and release
it.
The existing memory card ejects from the slot.
4
Remove the existing card from the slot
5
Insert the new memory card into the slot.
6
Press the card in until it clicks.
7
Replace the panel, and slide it upward until the panel clicks
into place.
Formatting the Dash Cam Memory Card
The dash cam requires a memory card formatted using the
FAT32 file system. You can use the device to format your card
using this file system.
You should format your memory card at least one time every 6
months to help extend the useful life of the memory card. You
must also format a brand new memory card if it is not formatted
using the FAT32 file system.
NOTE: Formatting the memory card deletes all videos, photos,
and data on the card.
1
Select > Navigation > Dash Cam Gallery.
2
Select > Format memory card.
Driver Awareness Features and Alerts
CAUTION
The driver alerts and speed limit features are for information
only and do not replace your responsibility to abide by all posted
4 Driver Awareness Features and Alerts
speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you
receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer
driving and increase efficiency, even when you are driving in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone for some types of driver alerts. Not all alerts are
available in all areas.
Schools: The device plays a tone and displays the speed limit
(if available) for an upcoming school or school zone.
Speed limit exceeded: The device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Speed limit change: The device plays a tone and displays the
upcoming speed limit so you can be prepared to adjust your
speed.
Railroad crossing: The device plays a tone to indicate an
upcoming railroad crossing.
Animal crossing: The device plays a tone to indicate an
upcoming animal crossing area.
Curves: The device plays a tone to indicate a curve in the road.
Slower traffic: The device plays a tone to indicate slower traffic
when you approach slower traffic at a higher speed. Your
device must be receiving traffic information to use this feature
(Traffic, page 17).
Risk of grounding: The device plays a tone and displays a
message when you approach a road where your vehicle
could become grounded.
Lateral wind: The device plays a tone and displays a message
when you approach a road where there is risk of lateral wind.
Narrow road: The device plays a tone and displays a message
when you approach a road that may be too narrow for your
vehicle.
Steep hill: The device plays a tone and displays a message
when you approach a steep hill.
State and country borders: The device plays a tone and
displays a message when you approach the border of a state
or country.
Shut off propane: The device plays a tone and displays a
message when you approach an area where propane should
be turned off.
Forward collision warning: The device alerts you when it
detects that you are not maintaining a safe distance between
your vehicle and the vehicle in front of you (Forward Collision
Warning System, page 5).
Lane departure warning: The device alerts you when it detects
you may be crossing a lane boundary unintentionally (Lane
Departure Warning System, page 6).
Enabling or Disabling Driver Alerts
You can enable or disable several types of driver alerts.
1
Select Settings > Navigation > Driver Assistance > Driver
Alerts.
2
Select or clear the check box next to each alert.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
In some areas, your device can receive live red light and
speed camera data while connected to a smartphone running
the Garmin Drive app.
You can use the Garmin Express
software (garmin.com
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Advanced Driver Assistance System
Your device includes an advanced driver assistance system
(ADAS), which uses the integrated dash camera to provide
warnings and alerts about your driving environment.
You can enable or disable each of the advanced driver
assistance features in the Driver Assistance settings (Driver
Assistance Settings, page 20).
Forward Collision Warning System
WARNING
The forward collision warning system (FCWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
FCWS relies on the camera to provide a warning of upcoming
vehicles and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
NOTE: This feature is not available in all areas or for all product
models.
The FCWS feature alerts you when the device detects that you
are not maintaining a safe distance between your vehicle and
the vehicle in front of you. The device determines your vehicle
speed using GPS, and it calculates an estimated safe following
distance based on your speed. The FCWS activates
automatically when your vehicle speed exceeds 48 km/hr
(30 mph).
When the device detects that you are too close to the vehicle
ahead of you, the device plays an audible alert, and a warning
appears on the screen.
Forward Collision Warning System Performance Tips
Several factors affect the performance of the forward collision
warning system (FCWS). Some conditions may prevent the
FCWS feature from detecting a vehicle ahead of you.
The FCWS feature activates only when your vehicle speed
exceeds 50 km/h (30 mph).
The FCWS feature may not detect a vehicle ahead of you
when the camera's view of the vehicle is obscured by rain,
fog, snow, sun or headlight glare, or darkness.
The FCWS feature may not function properly if the camera is
incorrectly aligned (Aligning the Camera, page 3).
The FCWS feature may not detect vehicles greater than 40 m
(130 ft.) away or closer than 5 m (16 ft.).
The FCWS feature may not function properly if the camera
placement settings do not correctly indicate your vehicle
height or the placement of your device in the vehicle (Aligning
the Camera, page 3).
Driver Awareness Features and Alerts 5
Lane Departure Warning System
WARNING
The lane departure warning system (LDWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
LDWS relies on the camera to provide warnings for lane
markers and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
The LDWS feature alerts you when the device detects you may
be crossing a lane boundary unintentionally. For example, the
device alerts you if you cross some solid painted lane
boundaries. The LDWS feature provides alerts only when your
vehicle speed exceeds 64 km/h (40 mph). The alert appears on
the left or right side of the screen to indicate which lane
boundary you crossed.
NOTE: For the best LDWS performance, you should set the
Camera Placement option to indicate the location of the device
in your vehicle.
Setting the Camera Placement
You can mount the device in the left, center, or right of your
windshield or dash. For the best LDWS performance, you
should set the Camera Placement option to indicate the location
of your device in the vehicle.
1
Select Settings > Dash Cam > Camera Placement >
Horizontal Position.
2
Select the location of the device.
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure
warning system (LDWS). Some conditions may prevent the
LDWS feature from detecting lane departures.
The LDWS feature provides alerts only when your vehicle
speed exceeds 65 km/h (40 mph).
The LDWS feature may not function properly if the camera is
incorrectly aligned.
The LDWS feature may not function properly if the camera
placement settings do not correctly indicate your vehicle
height or the placement of your device in the vehicle (Aligning
the Camera, page 3).
The LDWS feature requires a clear, continuous view of the
lane divider lines.
Lane departures may not be detected when divider lines
are obscured by rain, fog, snow, extreme shadows, sun or
headlight glare, road construction, or any other visual
obstruction.
Lane departures may not be detected if lane divider lines
are misaligned, missing, or heavily worn.
The LDWS feature may not detect lane departures on
extremely wide, narrow, or winding roads.
Warning and Alert Symbols
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Warning and alert symbols may appear on the map or in route
directions to alert you to potential hazards and road conditions.
Restriction Warnings
Height
Weight
Length
Width
Trailer height
Trailer weight
Trailer length
Trailer width
No boat trailers allowed
No campers allowed
No trailers allowed
No propane
No left turn
No right turn
No U turn
Road Condition Warnings
Risk of grounding
Lateral wind
Narrow road
Sharp curve
Steep down hill
Tree overhang
Alerts
Weigh station
Road not verified for motorhomes
Finding and Saving Locations
The maps loaded in your device contain locations, such as
restaurants, hotels, auto services, and detailed street
information. The Where To? menu helps you find your
destination by providing several methods to browse, search, and
save this information.
From the main menu, select Where To?.
To quickly search all locations on your device, select Enter
Search (Finding a Location Using the Search Bar, page 7).
To find an address, select Address (Finding an Address,
page 7).
To browse or search pre-loaded points of interest by
category, select Categories (Finding a Location by Category,
page 8).
To search near a different city or area, select next to the
current search area (Changing the Search Area, page 7).
To view and edit your saved locations, select Saved (Saving
Locations, page 10).
6 Finding and Saving Locations
To view locations you have recently selected from the search
results, select Recent (Viewing Recently Found Locations,
page 10).
To search for RV parks and campgrounds, select All
Campgrounds(Finding Campgrounds, page 8).
To browse, search, and check into Foursquare
®
points of
interest, select Foursquare (Searching Foursquare Points of
Interest, page 9).
To browse and search TripAdvisor
®
points of interest and
reviews, select TripAdvisor (TripAdvisor, page 9).
To browse and search HISTORY
®
points of interest, photos,
and information, select History® (Finding HISTORY Points
of Interest, page 8).
To find national parks and explore park maps, select
National Parks (Finding National Parks, page 8).
To navigate to specific geographic coordinates, select
Coordinates (Finding a Location Using Coordinates,
page 9).
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
1
Select Where To?.
2
Select Enter Search in the search bar.
3
Enter all or part of the search term.
Suggested search terms appear below the search bar.
4
Select an option:
To search for a type of business, enter a category name
(for example, "movie theaters").
To search for a business name, enter all or part of the
name.
To search for an address near you, enter the house
number and street name.
To search for an address in another city, enter the house
number, street name, city, and state.
To search for a city, enter the city and state.
To search for coordinates, enter latitude and longitude
coordinates.
5
Select an option:
To search using a suggested search term, select the term.
To search using the text you entered, select .
6
If necessary, select a location.
Finding an Address
NOTE: The order of the steps may change depending on the
map data loaded on your device.
1
Select Where To?.
2
If necessary, select to search near a different city or area.
3
Select Address.
4
Follow the on-screen instructions to enter address
information.
5
Select the address.
Location Search Results
By default, the location search results appear in a list, with the
nearest location at the top. You can scroll down to view more
results.
Select a location to view the option menu.
Select to view detailed information about the selected location.
Select to find parking areas near the location.
Select to view alternate routes to the locations.
Go!
Select to start navigating to the location using the
recommended route.
Select to view the search results on the map.
Changing the Search Area
By default, the device searches for locations near your current
location. You can also search other areas, such as near your
destination, near another city, or along your active route.
1
Select Where To?.
2
Select next to the current search area .
3
Select a search area.
4
If necessary, follow the on-screen instructions to select a
specific location.
The selected search area appears next to . When you search
for a location using any of the options in the Where To? menu,
the device suggests locations near this area first.
Location Search Results on the Map
You can view the results of a location search on the map instead
of in a list.
From the location search results, select . The nearest location
appears at the center of the map, and basic information about
the selected location appears at the bottom of the map.
Finding and Saving Locations 7
Drag the map to view additional search results.
Additional search results. Select to view another location.
Selected location summary. Select to view detailed information
about the selected location.
Go!
Select to start navigating to the location using the
recommended route.
Select to view the search results in a list.
Changing the Search Area Using the Map
1
Select View Map.
2
Touch anywhere on the map.
3
Drag the map to the new search area.
4
Select Search Here.
Points of Interest
A point of interest is a place that you may find useful or
interesting. Points of interest are organized by category and can
include popular travel destinations such as gas stations,
restaurants, hotels, and entertainment venues.
Finding a Location by Category
1
Select Where To?.
2
Select a category, or select Categories.
3
If necessary, select a subcategory.
4
Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
four destinations you selected.
1
Select Where To? > Categories.
2
Select a category.
3
Select an option:
Select a destination from the quick search list on the right
side of the screen.
The quick search list provides a list of recently found
locations in the selected category.
Select a subcategory, if necessary, and select a
destination.
Finding Campgrounds
Select Where To? > All Campgrounds.
Finding Campgrounds with Amenities
You can search for RV parks and campgrounds based on the
amenities available.
1
Select Where To?.
2
Select an RV parks and campgrounds search provider, such
as PlanRV™ Parks, The Caravan and Motorhome Club, or
ACSI™.
NOTE: All search providers are not available on all product
models.
3
If necessary, select Filter by Amenities, select one or more
amenities, and select Save.
4
Select a location.
Finding iOverlander
Points of Interest
Your device includes iOverlander points of interest, which allow
you to find points of interest useful for overlanding, such as
camp sites, repair services, and lodging.
1
Select Where To? > iOverlander.
2
Select a category.
3
Select a location.
Finding Ultimate Campgrounds Points of Interest
NOTE: This feature is not available in all areas.
Your device includes Ultimate Campgrounds points of interest,
which allow you to find public campgrounds near your location.
1
Select Where To? > Ultimate Public Campgrounds.
2
If necessary, select Search Filters, select one or more
search filters, and select Search.
3
Select a location.
Finding RV Services
NOTE: This feature is not available in all areas.
You can find nearby locations that offer repair, towing, and other
services for RVs.
Select Where To? > PlanRV™ Services.
Finding National Parks
Device models that include maps for North America or the
United States also include detailed information for national parks
in the United States. You can navigate to a national park or to a
location within a national park.
1
Select Where To? > National Parks.
A list of national parks appears, with the nearest park at the
top.
2
Select Enter Search, and enter all or part of the park name
to narrow the results (optional).
3
Select a national park.
A list of categories for locations of features and amenities
within the park appears below the park name.
4
Select an option:
To start navigating to the park, select Go!.
To view more park information or explore the park
features and amenities, select .
To quickly find a location within the park, select a category
from the list below the park name, and select a location.
Exploring National Park Features and Amenities
On North American product models, you can explore detailed
information about the features and amenities available inside a
national park, and navigate to specific locations in the park. For
example, you can find campgrounds, landmarks, visitor centers,
and popular attractions.
1
From the location search results, select a national park, and
select .
2
Select Explore this Park.
A list of categories for park features and amenities appears.
3
Select a category.
4
Select a location, and select Go!.
Finding HISTORY Points of Interest
NOTE: This feature is not available on all product models.
Your device includes HISTORY points of interest, which allow
you to find and learn about historically significant locations and
attractions around the world, such as historic buildings,
monuments, museums, and notable locations of historic events.
1
Select Where To? > History®.
2
Select a category.
3
Select a location.
4
Select to view a photo and a short summary of the
location's history.
Foursquare
Foursquare is a location-based social network. Your device
includes pre-loaded Foursquare points of interest, which are
indicated by the Foursquare logo in your location search results.
8 Finding and Saving Locations
You can connect to your Foursquare account using the Garmin
Drive app on your compatible smartphone. This allows you to
view Foursquare location details, check in to a location, and
search for points of interest in the online Foursquare database.
Connecting to Your Foursquare Account
Before you can use this feature, your device must be connected
to a supported phone running the Garmin Drive app (Live
Services, Traffic, and Smartphone Features, page 15).
1
On your smartphone, open the Garmin Drive app.
2
Select > Foursquare > Login.
3
Enter your Foursquare login information.
Searching Foursquare Points of Interest
You can search for Foursquare points of interest loaded on your
device. While your device is connected to your Foursquare
account using the Garmin Drive app, the search provides the
most up-to-date results from the online Foursquare database
and customized results from your Foursquare user account
(Connecting to Your Foursquare Account, page 9).
Select Where To? > Foursquare.
Viewing Foursquare Location Details
Before you can use this feature, your device must be connected
to your Foursquare account using the Garmin Drive app
(Connecting to Your Foursquare Account, page 9).
You can view detailed Foursquare location information, such as
user ratings, restaurant pricing information, and hours of
operation.
1
From the location search results, select a Foursquare point of
interest.
2
Select .
Checking in with Foursquare
Before you can use this feature, your device must be connected
to your Foursquare account using the Garmin Drive app
(Connecting to Your Foursquare Account, page 9).
1
Select Where To? > Foursquare > Check In.
2
Select a point of interest.
3
Select > Check In.
TripAdvisor
Your device includes TripAdvisor points of interest and ratings.
TripAdvisor ratings appear automatically in the search results list
for applicable points of interest. You can also search for nearby
TripAdvisor points of interest and sort by distance or popularity.
Finding TripAdvisor Points of Interest
1
Select Where To? > TripAdvisor.
2
Select a category.
A list of nearbyTripAdvisor points of interest for the category
appears.
3
Select Sort Results to sort the search results by distance or
popularity (optional).
Navigating to Points of Interest Within a Venue
NOTE: This feature may not be available in all areas or for all
product models.
You can create a route to a point of interest (POI) within a larger
venue, such as a store in a shopping mall or a specific terminal
in an airport.
1
Select Where To? > Enter Search.
2
Select an option:
To search for the venue, enter the name or address of the
venue, select , and go to step 3.
To search for the POI, enter the name of the POI, select
, and go to step 5.
3
Select the venue.
A list of categories appears below the venue, such as
restaurants, car rentals, or terminals.
4
Select a category.
5
Select the POI, and select Go!.
The device creates a route to the parking area or venue
entrance closest to the POI. When you arrive at the destination,
a checkered flag indicates the recommended parking area. A
labeled point indicates the location of the POI within the venue.
Exploring a Venue
NOTE: This feature may not be available in all areas or for all
product models.
You can view a list of all points of interest located within each
venue.
1
Select a venue.
2
Select > Explore this Venue.
Search Tools
Search tools allow you to search for specific types of locations
by responding to on-screen prompts.
Finding an Intersection
You can search for an intersection or junction between two
streets, highways, or other roads.
1
Select Where To? > Intersections.
2
Follow the on-screen instructions to enter street information.
3
Select the intersection.
Finding a Location Using Coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1
Select Where To? > Coordinates.
2
If necessary, select , and change the coordinate format or
datum.
3
Enter the latitude and longitude coordinates.
4
Select View on Map.
Parking
Your Garmin device includes detailed parking data, which can
help you find nearby parking based on the likelihood of available
parking spots, type of parking area, price, or accepted payment
methods.
NOTE: Detailed parking data is not available in all areas or for
all parking locations.
Finding Parking Near Your Current Location
1
Select Where To? > Parking.
2
Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: Detailed parking data is not available in all areas or
for all parking locations.
3
Select a parking location.
4
Select Go!.
Finding Parking Near a Specified Location
1
Search for a location.
2
From the location search results, select a location.
3
Select .
A list of parking areas near the selected location appears.
4
Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: Detailed parking data is not available in all areas or
for all parking locations.
Finding and Saving Locations 9
5
Select a parking location.
6
Select Go!.
Understanding Parking Colors and Symbols
Parking locations that include detailed parking data are color-
coded to show the likelihood of finding parking. Symbols indicate
the type of parking available (street or lot), relative pricing
information, and payment type.
You can view the legend for these colors and symbols on the
device.
From the parking search results, select .
Viewing Recently Found Locations
Your device stores a history of the last 50 locations you have
found.
Select Where To? > Recent.
Clearing the List of Recently Found Locations
Select Where To? > Recent > > Clear > Yes.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
Finding Emergency Services and Fuel
You can use the Where Am I? page to find the nearest
hospitals, police stations, and fuel stations.
1
From the map, select the vehicle.
2
Select Hospitals, Police Stations, Fuel, or Roadside
Assist..
NOTE: Some service categories are not available in all
areas.
A list of locations for the selected service appears, with the
nearest locations at the top.
3
Select a location.
4
Select an option:
To navigate to the location, select Go!.
To view the phone number and other location details,
select .
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1
From the map, select the vehicle.
2
Select > Directions to Me.
3
Select a starting location.
4
Select Select.
Adding a Shortcut
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1
Select Where To? > Add Shortcut.
2
Select an item.
Removing a Shortcut
1
Select Where To? > > Remove Shortcut(s).
2
Select a shortcut to remove.
3
Select the shortcut again to confirm.
4
Select Done.
Saving Locations
Saving a Location
1
Search for a location (Finding a Location by Category,
page 8).
2
From the search results, select a location.
3
Select > Save.
4
Enter a name, and select Done.
Saving Your Current Location
1
From the map, select the vehicle icon.
2
Select Save.
3
Enter a name, and select Done.
4
Select OK.
Editing a Saved Location
1
Select Where To? > Saved.
2
If necessary, select a category.
3
Select a location.
4
Select .
5
Select > Edit.
6
Select an option:
Select Name.
Select Phone Number.
Select Categories to assign categories to the saved
location.
Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7
Edit the information.
8
Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after you
have saved at least 12 locations.
1
Select Where To? > Saved.
2
Select a location.
3
Select .
4
Select > Edit > Categories.
5
Enter one or more category names, separated by commas.
6
If necessary, select a suggested category.
7
Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1
Select Where To? > Saved.
2
Select > Delete Saved Places.
3
Select the box next to the saved locations to delete, and
select Delete.
Following a Route
Routes
A route is a path from your current location to one or more
destinations.
The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode (Changing the Route Calculation
Mode, page 12) and avoidances (Avoiding Delays, Tolls,
and Areas, page 12).
10 Following a Route
The device can automatically avoid roads that are not
appropriate for the active vehicle profile.
You can start navigating to your destination quickly using the
recommended route, or you can select an alternate route
(Starting a Route, page 11).
If there are specific roads you need to use or avoid, you can
customize the route (Shaping Your Route, page 12).
You can add multiple destinations to a route (Adding a
Location to Your Route, page 12).
Starting a Route
1
Select Where To?, and search for a location (Finding and
Saving Locations, page 6).
2
Select a location.
3
Select an option:
To start navigating using the recommended route, select
Go!.
To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
To edit the course of the route, select > Edit Route, and
add shaping points to the route (Shaping Your Route,
page 12).
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your Route on
the Map, page 11). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route (Adding a Location to Your Route,
page 12).
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1
Select View Map.
2
Drag and zoom the map to display the area to search.
3
If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4
Select an option:
Select a location marker.
Select a point, such as a street, intersection, or address
location.
5
Select Go!.
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1
Select Where To? > Go Home.
2
If necessary, enter your home location.
Editing Your Home Location
1
Select Where To? > > Set Home Location.
2
Enter your home location.
Your Route on the Map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
Next action in the route. Indicates the next turn, exit, or other action
and the lane in which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of
upcoming actions.
Vehicle speed.
Name of the road on which you are traveling.
Estimated arrival time.
TIP: You can touch this field to change the information it shows
(Changing the Map Data Field, page 15).
Map tools. Provides tools to show you more information about your
route and surroundings.
Active Lane Guidance
As you approach some turns, exits, or interchanges in your
route, a detailed simulation of the road appears beside the map,
if available. A colored line indicates the proper lane for the
turn.
Viewing Turns and Directions
While navigating a route, you can view upcoming turns, lane
changes, or other directions for your route.
1
From the map, select an option:
To view upcoming turns and directions as you navigate,
select > Turns.
The map tool displays the next several turns or directions
beside the map. The list updates automatically as you
navigate the route.
To view the complete list of turns and directions for the
entire route, select the text bar at the top of the map.
2
Select a turn or direction (optional).
Detailed information appears. An image of the junction may
appear for junctions on major roadways, if available.
Viewing the Entire Route on the Map
1
While navigating a route, select anywhere on the map.
2
Select .
Following a Route 11
Arriving at Your Destination
When you approach your destination, the device provides
information to help you complete your route.
indicates the location of your destination on the map, and a
voice prompt announces you are approaching your
destination.
When you approach some destinations, the device
automatically prompts you to search for parking. You can
select Yes to find nearby parking areas (Parking Near Your
Destination, page 12).
When you stop at your destination, the device automatically
ends the route. If the device does not detect your arrival
automatically, you can select Stop to end your route.
Parking Near Your Destination
Your device can help you find a parking spot near your
destination. When you approach some destinations, the device
automatically prompts you to search for parking.
1
Select an option:
When the device prompts you, select Yes to search for
nearby parking.
If the device does not prompt you, select Where To? >
Categories > Parking, and select > My Destination.
2
Select Filter Parking, and select one or more categories to
filter parking by availability, type, price, or payment methods
(optional).
NOTE: Detailed parking data is not available in all areas or
for all parking locations.
3
Select a parking location, and select Go! > Add As Next
Stop.
The device guides you to the parking area.
Changing Your Active Route
Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route (Starting a Route, page 11).
You can add locations to the middle or end of your route. For
example, you can add a fuel station as the next destination in
your route.
TIP: To create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a Trip, page 19).
1
From the map, select > Where To?.
2
Search for a location (Finding and Saving Locations, page 6).
3
Select a location.
4
Select Go!.
5
Select an option:
To add the location as the next destination in your route,
select Add As Next Stop.
To add the location to the end of your route, select Add
As Last Stop.
To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.
Shaping Your Route
Before you can shape your route, you must start a route
(Starting a Route, page 11).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1
Touch anywhere on the map.
2
Select .
The device enters route shaping mode.
3
Select a location on the map.
TIP: You can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
4
If necessary, select an option:
To add more shaping points to the route, select additional
locations on the map.
To remove a shaping point, select .
5
When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1
From the map, select > Change Route.
2
Select an option:
To detour your route for a specific distance, select Detour
by Distance.
To detour around a specific road on the route, select
Detour by Road.
Changing the Route Calculation Mode
1
Select Settings > Navigation > Route Preferences >
Calculation Mode.
2
Select an option:
Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
Select Off Road to calculate point-to-point routes (without
roads).
Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Stopping the Route
From the map, select > Stop.
From the home screen, select Stop.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device Settings,
page 21).
Using the myTrends
feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls, and Areas
Avoiding Traffic Delays on Your Route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using Your Smartphone,
page 17).
By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page 20), you can view and avoid
traffic delays manually.
1
While navigating a route, select > Traffic.
2
Select Alternate Route, if available.
12 Following a Route
3
Select Go!.
Avoiding Toll Roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1
Select Settings > Navigation > Route Preferences.
2
Select an option:
NOTE: The menu changes based on your area and the map
data on your device.
Select Toll Roads.
Select Tolls and Fees > Toll Roads.
3
Select an option:
To be asked each time before routing through a toll area,
select Always Ask.
To always avoid tolls, select Avoid.
To always allow tolls, select Allow.
4
Select Save.
Avoiding Toll Stickers
If the map data on your device contains detailed toll sticker
information, you can avoid or allow roads that require toll
stickers for each country.
NOTE: This feature is not available in all areas.
1
Select Settings > Navigation > Route Preferences > Tolls
and Fees > Toll Stickers.
2
Select a country.
3
Select an option:
To be asked each time before routing through an area that
requires toll stickers, select Always Ask.
To always avoid roads that require toll stickers, select
Avoid.
To always allow roads that require toll stickers, select
Allow.
4
Select Save.
Avoiding Road Features
1
Select Settings > Navigation > Route Preferences >
Avoidances.
2
Select the road features to avoid on your routes, and select
OK.
Avoiding Environmental Zones
Your device can avoid areas with environmental or emissions
restrictions that may apply to your vehicle. This option applies to
the vehicle type in the active vehicle profile.
1
Select Settings > Navigation > Route Preferences >
Environmental Zones.
2
Select an option:
To be asked each time before routing through an
environmental zone, select Always Ask.
To always avoid environmental zones, select Avoid.
To always allow environmental zones, select Allow.
3
Select Save.
Custom Avoidances
Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a Road
1
Select Settings > Navigation > Route Preferences >
Custom Avoidances.
2
If necessary, select Add Avoidance.
3
Select Add Avoid Road.
4
Select the starting point of the section of road to avoid, and
select Next.
5
Select the ending point of the road section, and select Next.
6
Select Done.
Avoiding an Area
1
Select Settings > Navigation > Route Preferences >
Custom Avoidances.
2
If necessary, select Add Avoidance.
3
Select Add Avoid Area.
4
Select the upper-left corner of the area to avoid, and select
Next.
5
Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6
Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1
Select Settings > Navigation > Route Preferences >
Custom Avoidances.
2
Select an avoidance.
3
Select > Disable.
Deleting Custom Avoidances
1
Select Settings > Navigation > Route Preferences >
Custom Avoidances.
2
Select an option:
To delete all custom avoidances, select .
To delete one custom avoidance, select the avoidance,
and select > Delete.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
Select Settings > Navigation > Route Preferences >
Calculation Mode > Off Road > Save.
The device ignores roads and calculates routes using straight
lines between destinations.
Using the Map
You can use the map to navigate a route (Your Route on the
Map, page 11) or to view a map of your surroundings when no
route is active.
1
Select View Map.
2
Touch anywhere on the map.
3
Select an option:
Drag the map to pan left, right, up, or down.
To zoom in or out, select or .
To switch between North Up and 3-D views, select .
To filter the displayed points of interest by category, select
.
To start a route, select a location on the map, and select
Go! (Starting a Route by Using the Map, page 11).
Map Tools
Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: Stops navigation of the active route.
Using the Map 13
Camera: Provides dash cam controls and displays forward
collision and lane departure alerts. Also allows you to access
the dash cam viewfinder and the driver assistance settings.
Change Route: Allows you to take a detour or skip locations in
your route (Changing Your Active Route, page 12).
Mute: Mutes the master volume.
Cities Ahead: Shows upcoming cities and services along your
active route or along a highway (Cities Ahead, page 14).
Up Ahead: Shows upcoming locations along the route or the
road on which you are traveling (Up Ahead, page 14).
Elevation: Displays elevation changes ahead.
Traffic: Displays traffic conditions along your route or in your
area (Viewing Upcoming Traffic, page 15). This feature is
not available in all areas or for all device models.
Trip Data: Displays customizable trip data, such as speed or
mileage (Viewing Customized Trip Information on the Map,
page 14).
Turns: Displays a list of upcoming turns in your route (Viewing
Turns and Directions, page 11).
Phone: Displays a list of recent phone calls from your
connected phone, and displays in-call options while a phone
call is active (Using In-Call Options, page 16).
Weather: Displays weather conditions for your area.
photoLive: Displays live traffic cameras from your photoLive
subscription (photoLive Traffic Cameras, page 19).
Report Camera: Allows you to report a speed or red light
camera. This tool is available only when you have speed or
red light camera data on your device and you have an active
connection to the Garmin Drive app (Live Services, Traffic,
and Smartphone Features, page 15).
Viewing a Map Tool
1
From the map, select .
2
Select a map tool.
The map tool appears in a panel at the edge of the map.
3
When you are done using the map tool, select .
Up Ahead
The Up Ahead tool provides information about upcoming
locations along your route or the road on which you are
traveling. You can view upcoming points of interest by category,
such as restaurants, fuel stations, or rest areas.
You can customize three categories to show in the Up Ahead
tool.
Viewing Upcoming Locations
1
From the map, select > Up Ahead.
While you are traveling, the map tool shows the next location
along your road or route in each of the three categories.
While you are not traveling, the map tool shows the three
category names.
2
Select an option:
If the map tool shows categories, select a category to view
a list of nearby locations in that category.
If the map tool shows upcoming locations, select a
location to view location details or start a route to the
location.
Customizing the Up Ahead Categories
You can change the location categories that appear in the Up
Ahead tool.
1
From the map, select > Up Ahead.
2
Select a category.
3
Select .
4
Select an option:
To move a category up or down in the list, select and drag
the arrow next to the category name.
To change a category, select the category.
To create a custom category, select a category, select
Custom Search, and enter the name of a business or
category.
5
Select Save.
Cities Ahead
While you are traveling on a highway or navigating a route that
includes a highway, the Cities Ahead tool provides information
about upcoming cities along the highway. For each city, the map
tool shows the distance to the highway exit and the services
available, similar to the information on highway road signs.
Viewing Upcoming Cities and Exit Services
1
From the map, select > Cities Ahead.
While you are traveling along a highway or an active route,
the map tool shows information about upcoming cities and
exits.
2
Select a city.
The device shows a list of points of interest located at the
selected city exit, such as fuel stations, lodging, or
restaurants.
3
Select a location, and select Go! to start navigating.
Trip Information
Viewing Customized Trip Information on the Map
You can use the trip data map tool to show customized trip
information on the map.
1
From the map, select > Trip Data.
2
Select an option:
Select a data field in the trip data tool , and select the
information to show in the field.
Select the customizable map data field , and select the
information to show in the field.
Viewing the Trip Information Page
The trip information page displays your speed and provides
statistics about your trip.
From the map, select Speed.
Viewing the Trip Log
Your device keeps a trip log, which is a record of the path you
have traveled.
1
Select Settings > Navigation > Map & Vehicle > Map
Layers.
2
Select the Trip Log check box.
Resetting Trip Information
1
From the map, select Speed.
2
Select > Reset Field(s).
14 Using the Map
3
Select an option:
When not navigating a route, select Select All to reset
every data field except the speedometer, on the first page.
Select Reset Trip Data to reset the information on the trip
computer.
Select Reset Max. Speed to reset the maximum speed.
Select Reset Trip B to reset the odometer.
Viewing Upcoming Traffic
Before you can use this feature, your device must be receiving
traffic data (Traffic, page 17).
You can view traffic incidents coming up along your route or
along the road on which you are traveling.
1
While navigating a route, select > Traffic.
The nearest upcoming traffic incident appears in a panel on
the right side of the map.
2
Select the traffic incident to view additional details.
Viewing Traffic on the Map
The traffic map shows color-coded traffic flow and delays on
nearby roads.
1
From the main menu, select > Navigation > Traffic.
2
If necessary, select > Legend to view the legend for the
traffic map.
Searching for Traffic Incidents
1
From the main menu, select > Navigation > Traffic.
2
Select > Incidents.
3
Select an item in the list.
4
If there is more than one incident, use the arrows to view
additional incidents.
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as
icons for points of interest and road conditions.
1
Select Settings > Navigation > Map & Vehicle > Map
Layers.
2
Select the check box next to each layer you want to show on
the map.
Changing the Map Data Field
1
From the map, select a data field.
NOTE: You cannot customize Speed.
2
Select a type of data to display.
Changing the Map Perspective
1
Select Settings > Navigation > Map & Vehicle > Driving
Map View.
2
Select an option:
Select Track Up to display the map in two dimensions (2-
D), with your direction of travel at the top.
Select North Up to display the map in 2-D with north at
the top.
Select 3-D to display the map in three dimensions.
Live Services, Traffic, and
Smartphone Features
The Garmin Drive app allows your device to receive smart
notifications and live information, such as live traffic data and
weather information.
Live traffic data: Sends real-time traffic data to your device,
such as traffic incidents and delays, construction zones, and
road closings (Traffic, page 17).
Weather information: Sends real-time weather forecasts, road
conditions, and weather radar to your device (Viewing the
Weather Forecast, page 18).
Smart Notifications: Displays phone notifications and
messages on your device. This feature is not available for all
languages.
Hands-Free calling: Allows you to place and receive phone
calls using your device, and allows you to use the device as a
hands-free speaker phone. If the selected language supports
the voice command feature, you can place calls using voice
commands.
Send locations to device: Allows you to send locations from
your smartphone to your navigation device.
Foursquare check in: Allows you to check in to Foursquare
locations using your navigation device (Checking in with
Foursquare, page 9).
Pairing with Your Smartphone
You can pair your Garmin device with your smartphone and the
Garmin Drive app to enable additional features and access live
information (Live Services, Traffic, and Smartphone Features,
page 15) .
1
From the app store on your smartphone, install the Garmin
Drive app.
2
Turn on your Garmin device, and place the device and your
smartphone within 3 m (10 ft.) of each other.
3
On your phone, open the Garmin Drive app.
4
Follow the on-screen instructions to sign in to a Garmin
account and complete the pairing and setup process.
The main app dashboard appears. After the devices are paired,
they connect automatically when they are turned on and within
range.
Enabling or Disabling Bluetooth Features
You can enable or disable hands-free calling and Garmin Drive
features for your paired smartphone.
1
Select Settings > Bluetooth.
2
Select next to your phone name.
3
In the Use for section, select an option:
To enable a connection to the Garmin Drive app, select
Garmin Drive.
To enable hands-free calling features, select Hands-Free.
4
Select OK.
Showing or Hiding App Notifications (Android
)
You can use the Garmin Drive app to customize which types of
smartphone notifications appear on your Garmin device.
1
On your phone, open the Garmin Drive app.
2
Select > Smart Notifications.
A list of your smartphone apps appears.
3
Select the toggle switch next to an app to enable or disable
notifications for the app.
Showing or Hiding Notification Categories for Your Apple
®
Device
If you are connected to an Apple device, you can filter the
notifications shown on your Garmin device by showing or hiding
categories.
1
Select > Navigation > Smart Notifications > .
2
Select the check box next to each notification to show.
Live Services, Traffic, and Smartphone Features 15
Pairing Additional Bluetooth Devices
1
Place your headset or phone and your Bluetooth device
within 33 ft. (10 m) of each other.
2
On your device, enable Bluetooth wireless technology.
3
On your headset or phone, enable Bluetooth wireless
technology and make it visible to other Bluetooth devices.
4
On your device, select Settings > Bluetooth.
A list of nearby Bluetooth devices appears.
5
Select your headset or phone from the list.
6
Select Pair.
Smart Notifications
While your device is connected to the Garmin Drive app, you
can view notifications from your smartphone on your Garmin
device, such as text messages, incoming calls, and calendar
appointments.
Receiving Notifications
WARNING
Do not read or reply to notifications while driving.
Before you can use this feature, your device must be connected
to a supported phone running the Garmin Drive app (Live
Services, Traffic, and Smartphone Features, page 15).
From most pages, a popup appears when the device receives a
notification from your smartphone. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
NOTE: If you are viewing the map, notifications appear in a map
tool.
To ignore a notification, select OK.
The popup closes, but the notification remains active on your
phone.
To view a notification, select View.
To listen to the notification, select View > Play.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: Additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Receiving Notifications while Viewing the Map
WARNING
Do not read or reply to notifications while driving.
Before you can use this feature, your device must be connected
to a supported phone running the Garmin Drive app (Live
Services, Traffic, and Smartphone Features, page 15).
When you are viewing the map, new notifications appear in a
map tool at the edge of the screen. If the device is moving, you
must verify you are a passenger and not the driver before you
can view notifications.
To ignore a notification, select , or wait for popup to expire.
The popup closes, but the notification remains active on your
phone.
To view a notification, select the notification text.
To listen to the notification, select Play Message.
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
To listen to the notification using a voice command, say Play
Message.
NOTE: This option is available only when the selected
language supports the voice command feature and appears
in the map tool.
To perform additional actions, such as dismissing the
notification from your phone, select View, and select an
option.
NOTE: Additional actions are available for only some
notification types and must be supported by the app
generating the notification.
Viewing the List of Notifications
You can view a list of all active notifications.
1
Select > Navigation > Smart Notifications.
The list of notifications appears. Unread notifications appear
black, and previously read notifications appear gray.
2
Select an option:
To view a notification, select the notification description.
To listen to a notification, select .
The device reads the notification using text-to-speech
technology. This feature is not available for all languages.
Hands-Free Calling
NOTE: While most phones and headsets are supported and can
be used, it cannot be guaranteed that a particular phone or
headset can be used. All features may not be available for your
phone.
Using Bluetooth wireless technology, your device can connect to
your mobile phone and wireless headset or helmet to become a
hands-free device. To determine whether your device with
Bluetooth technology is compatible with your device, go to
www.garmin.com/bluetooth.
Placing a Call
1
Select .
2
Select an option:
To dial a number, select , enter the phone number, and
select .
To call a recently dialed or received phone number, select
, and select a number.
To call a contact from your phone book, select , and
select a contact.
Receiving a Call
When you receive a call, select Answer or Dismiss.
Using In-Call Options
In-call options appear when you answer a call. Some options
may not be compatible with your phone.
TIP: If you close the in-call options page, you can open it again
by selecting from the main menu.
To set up a conference call, select .
To transfer audio to your phone, select .
TIP: You can use this feature if you want to disconnect the
Bluetooth connection and remain on the call, or if you need
privacy.
To use the dial pad, select .
TIP: You can use this feature to use automated systems,
such as voice mail.
To mute the microphone, select .
To hang up, select .
Saving a Phone Number as a Preset
You can save up to three contacts as presets on the dial pad.
This allows you to quickly call your home phone number, family
members, or frequently called contacts.
1
Select > .
16 Live Services, Traffic, and Smartphone Features
1 / 1

Garmin 010-02228-00 Owner's manual

Category
Car navigation systems
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document