2. Fluke
  3. 725Ex Series Process Calibrator

Fluke 725Ex Series Process Calibrator User manual

  • Hello! I am an AI chatbot trained to assist you with the Fluke 725Ex Series Process Calibrator User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manual Supplement
© 2009-2014 Fluke Corporation. All rights reserved. Printed in U.S.A.
Manual Title: 725Ex Calibration Supplement Issue: 3
Part Number: 2406553 Issue Date: 2/14
Print Date: January 2005 Page Count: 1
Revision/Date: 1, 5/09
This supplement contains information necessary to ensure the accuracy of
the above manual. Enter the corrections in the manual if either one of the
following conditions exist:
1. The revision letter stamped on the indicated PCA is equal to or higher
than that given with each change.
2. No revision letter is indicated at the beginning of the change.
725Ex Calibration Manual Supplement
2/14 1
Change #1, 52976
On page 8, under General Specifications, Product Complaince, change the following:
From:
II 1 G EEx ia IIB 171 C
0344 KEMA 04ATEX1303
To:
II 1 G Ex ia IIB 171 C
0344 KEMA 04ATEX1303
Change #2
On page 43, Table 18:
Change:
Test lead, red
Test lead, black
688051
688066
1
1
To:
Fluke-7XX Test Lead Set 3397308 1
Change #3
On page 3, under Table 1, add:
Conforms to relevant South Korean EMC Standards.
/