Inepro DocuPRO Installation guide

Installation Guide

DocuPRO Embedded

Client for Xerox

Product Version: 7.0

Version of this manual: 7.0.9

DocuPRO Embedded Client for Xerox

Congratulations on selecting an Inepro Solution. We are certain you will be pleased with

your purchase of one of the finest solutions of the market.

We want to help you get the best result out of your Inepro Solution and to operate in

an efficient manner. This manual contains information on how to do that; please read it

carefully. Due to continuous product improvements this manual is subject to changes

without notice.

We strongly recommend you read the license agreement to fully understand its

coverage and your responsibilities of ownership.

Your Inepro buisiness partner is dedicated to your satisfaction and will be pleased to

answer your questions and your concerns.

Best wishes,

Inepro BV.

The most efficient embedded solution

including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the

publisher.

Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The

publisher and the author make no claim to these trademarks.

This product has been developed using Xerox Corporation proprietary embedded architecture or other proprietary Xerox products.

This document includes information which has been provided by Xerox Corporation, and such information is © Xerox Corporation or

its licensors. Copying in whole or in part of the Xerox information without permission of Xerox is prohibited, except to the limited

extent permitted by mandatory applicable law.

While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for

errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and

source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other

commercial damage caused or alleged to have been caused directly or indirectly by this document.

Version 7.0.9 created: October 2014 in Nieuw-Vennep, The Netherlands

Publisher

Managing Editor

Technical Editors

Cover Design

Inepro B.V.

K. de Graaf

R. Post

K. de Graaf

Production

Inepro B.V.

Team Coordinator

R. Groen

H. Wagenaar

DocuPRO Embedded Client for Xerox

Version 7.0.9 Inepro B.V. http://www.inepro.com

Table of Contents

Introduction 2

Requirements 4

Networking/Firewall Configuration 6

Installation 8

Configuration 12

........................................................................................................................................................ 121 Auto configure MFP’s

........................................................................................................................................................ 182 MFP Configuration

....................................................................................................................................................................................................... 18System Timeout

....................................................................................................................................................................................................... 19Confirmation / Error Reports

....................................................................................................................................................................................................... 20Secure Access

....................................................................................................................................................................................................... 22Web Services

........................................................................................................................................................ 223 Check MFP Settings

....................................................................................................................................................................................................... 23Enable SSL

....................................................................................................................................................................................................... 23Network Accounting

....................................................................................................................................................................................................... 25Lock All Applications

....................................................................................................................................................................................................... 26Set Default Application

....................................................................................................................................................................................................... 26Secure Access

Business Server Settings 28

Appendix I 32

Introduction

PartI

Introduction

2 - DocuPRO Embedded Client for Xerox

Introduction

Extensible Interface Platform (EIP) is a platform on which developers can create

an application that can drive the copier, scan and print functions.

DocuPRO embedded client for Xerox can release print jobs, copy and scan, and

will register and optionally enforce payment for those functions.

The DocuPRO client for Xerox embedded system has a number of basic functions:

§Print

§Copy

§Scan

The main focus of the system is a payment and accounting system for the basic

machine functions and provide a print release option for the Inepro DocuPRO

system. In order for this to work the system prevents the machines to be used

freely until a user is logged in. It also records all the transactions a user does

until the user logs out and store these to a central server

Requirements

PartII

Requirements

4 - DocuPRO Embedded Client for Xerox

Requirements

§The Xerox MFP’s must have the “Xerox Secure Access” authentication method

and the “Network Accounting” method installed. You may need to contact Xerox

to enable these functionalities.

§Ensure that the Xerox MFP’s are connected to the network.

§Have the network addresses of the Xerox MFP’s available. It is recommended

that the MFP’s are configured with a static IP.

§Have the network address available of the system running the Inepro Business

Server.

§Ensure your DocuPRO version is 7.0.14 or higher.

§Ensure your Xerox EIP (Extensible Interface Platform) version is 2.0 or higher

Networking/Firewall Configuration

PartIII

Networking/Firewall Configuration

6 - DocuPRO Embedded Client for Xerox

Networking/Firewall Configuration

Ensure that your networking/firewall configuration allows port 10056 for inbound TCP connections

from the Xerox MFP’s.

Make a rule, select port. Click .

Enter the port number (10056) and click

'Next'.

Choose 'Allow Connection' and click

Installation

PartIV

Installation

8 - DocuPRO Embedded Client for Xerox

Installation

Start setup.exe (not the msi file!) to begin the installation process. Follow the instructions on

screen to begin installing DocuPRO Embedded Client for Xerox.

You will be prompted to install Microsoft WSE 3.0, Ultidev WebServer and .Net 4.0 if not installed

already.

Continue the installation by clicking

Continue the installation by clicking .

Version 7.0.9 - 9

Confirm the installation by clicking .

Choose your installation folder, recommended is that you leave this default.

Continue the installation by clicking .

Installation

10 - DocuPRO Embedded Client for Xerox

Finish the installation by clicking

Configuration

PartV

Configuration

12 - DocuPRO Embedded Client for Xerox

Auto configure MFP’s

UltiDev Web Server settings

1. When the installation is completed start the UltiDev Web Server Explorer.

Check if the iXeroxEmbedded application is running.

2. Next go to the Network Addresses tab

3. Add a SSL Listen Address at port 10056 (Click 'Create a new certificate').

4. A new window opens.

Version 7.0.9 - 13

5. Create a self-assigned test certificate.

6. Select or type 'localhost', click .

7. Select certificate, click .

8. Fill out the port number, click .

Configuration

14 - DocuPRO Embedded Client for Xerox

9. Click Save config changes.

10.When the application is running again, browse to

https://localhost:10056/iXeroxEmbedded or click this shortcut on the desktop:

.

11.Fill in the Business server IP or host name and log in with your Inepro

Manager staff authentication (username and password). A Inepro

authentication must have been created in the Inepro Manager, please refer to

the Inepro Back Office Manager for instruction on creating authentication

accounts in the Inepro Back Office Manager.

12.Click login to continue.

Page is loading ...

Inepro DocuPRO Installation guide

Inepro DocuPRO Installation guide

Related papers

Other documents