How to charge the Mega Vault:
1. Be sure to fully charge the Vault before first use.
2. Connect the included USB/Micro-USB cable to charge the Vault from
the USB port on a computer or compatible wall adaptor.
3. When charging, the LED light will flash three times then show the
remaining battery on the LCD display panel.
How to use the Mega Vault to charge a device:
1. Use the Micro-USB end of the provided cable and plug it into your
device. Plug the opposite end into the Vault's USB output.
2. Press the ON/OFF button to show the current battery standby state.
Tech Specifications: Device is compatible with most smartphones,
MP3 Players, and other devices that are able to run 5V/1A or 5V/2A.
Maintenance:
• Charge the power bank at least once every three months when not
in use.
• Keep the unit dry, avoid damp conditions and corrosive materials.
• Do not clean with harsh chemicals, soaps, or detergents.
Parameters
Model No.
Cell Type
Battery Capacity
Input
Output
Product Size
Product Color
Charging Time
PB17C088
Index
Li-ion
8800mAh
5V/1A
5V/1A & 5V/2A
10 x 7.5 x 2.3cm
White & Grey
13-14 hours