©2020 Lavelle Industries, Inc.
665 McHenry Street • Burlington, WI 53105 • www.korky.com
®
How to Plunge a Sink
Sink Plunger
Cover Vents/Openings
1
Cover sink vents or openings with a wet rag.
Common examples include:
Dishwasher vent Sink overflow opening
Add Water
2
Ensure there is enough water in the sink
to cover the base of the plunger.
Plunge
3
Angle plunger into the sink, letting the head fill
with water as you completely cover the drain.
Pulse plunger in even up-and-down motion
for 10-15 seconds, then break the seal.
Repeat this process until the water drains/clog is cleared.
Clear Debris
4
Once the clog is cleared, run hot water to clear out
any leftover debris and help prevent future clogs.
Double sink
/
