SIMPLIFIED MFG B08Z5R4VMH User manual

Brand: SIMPLIFIED MFG

Model: B08Z5R4VMH

Category: Soundbar speakers

Type: User manual

SIMPLIFIED MFG B08Z5R4VMH is a high-performance 4K HDMI switch with various features for versatile use in your home theater setup. It supports 4K resolution at 60Hz, ensuring stunning visuals for your 4K TV or projector. With four HDMI inputs, you can easily connect multiple devices such as Blu-Ray players, gaming consoles, and streaming devices. The switch also supports audio extraction, allowing you to connect your soundbar or AV receiver for immersive audio experiences.

SW4:1

4×1 4K@60 HDMI Switch

User manual

Thank you for purchasing this device

The Simplified MFG SW4:1 is designed to provide years of reliable service.

At Simplified MFG, we want the experience with this device to be the best

possible and are committed to helping achieve that experience.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged

by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge

protection such as the HDSURGE and other systems is highly recommended

to protect and extend the life of your equipment.

I. Introduction

The SW4:1 a high-performance HDMI 4x1 switch that supports HDTV formats up to

4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio to separate

digital and analog audio output. This product supports HDCP repeater/CEC/ARC functions.

Select any of the inputs by front panel button or IR Remote, the corresponding indicator

LED on the front panel will be illuminated.

II. Features

• Compliant with HDMI 2.0a, DVI 1.0 standards

• HDCP 2.2 and HDCP 1.4 compliant

• Video formats up to 4Kx2K@60 and all HDMI 3D video formats

• Supports PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH

• Digital and analog audio output

• Supports smart EDID management (Auto/2CH/5.1CH/7.1CH selectable)

• Supports input port auto switching or manual switching mode

• Audio Return Channel (ARC) support

III. Package

• 1 x HDMI 4x1 Switch

• 1 x 5V/1A Power Adapter

• 1 x 38KHz IR Rx cable

• 1 x Optical converter (for SPDIF audio output)

• 1 x IR Remote

• 1 x Operation Manual

IV. Specifications

Frequency Bandwidth 18Gbps

Input Ports 4 HDMI Female ports, 1 IR Receive port and 1 RS232 port

Output port 1 HDMI Female port and 1 L/R & Optical port

HDMI Audio Output PCM2.1/5.1/7.1CH, Dolby5.1,DTS5.1, Dolby-TrueHD, DTS-HD

ESD Protection Human Body Model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

Dimensions (mm) 180 (D) x 85 (W) x 11.6 (H)

Weight (g) 300

Power Consumption Max 2.5W

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

V. Switch Operation controls and Functions

Front Panel:

① Input indicator LED, corresponding port LED will be illuminated when its port is

selected.

② Auto or manual select button:

Press this button >2 seconds to select auto switching or manual switching mode.

Under manual switching mode, short pressing this button to select input port.

③ EDID status LED (Auto means the EDID of the display is being utilized).

④ EDID select button (Press this button to select EDID mode Auto/2.1CH/5.1CH/7.1CH)

⑤ ARC status LED (this LED will be illuminated if ARC is enabled successfully)

⑥ ARC function on/off button

Rear Panel:

① HDMI output port, connect to display via HDMI cable

②③④⑤ HDMI input ports, connect with HDMI source via HDMI cable

⑥ Audio output (including L/R analog and optical audio out)

⑦ RS232 port ⑧ IR receiver port ⑨ DC 5V input port

VI. IR Remote

ARC: Press this button to enable or disable ARC function. ARC

LED on front panel will be illuminated if ARC function is

enabled successfully.

Auto/2.1ch/5.1ch/7.1ch: Press these buttons to select different

EDID setting and corresponding LED on front panel will be

illuminated.

Auto Source: Press this button to select auto switching or

manual switching mode.

In1/In2/In3/In4: Under manual switching mode, press this

button to select input.

VII. Application Example

Warranty

Should you feel your product does not function adequately due to defects in materials or

workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated

below (starting from the original date of purchase) either: a) Repair the product with new or

refurbished parts. or b) Replace it with a new or refurbished product.

All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty. During this

period, there will be no charge for unit repair, replacement of unit components or replacement

of product if necessary. The decision to repair or replace will be made by the warrantor. The

purchaser must mail-in the product during the warranty period. This limited warranty only

covers the product purchased as new and is extended to the original purchaser only. It is

non-transferable to subsequent owners, even during the warranty period. A purchase receipt

or other proof of original purchase date is required for the limited warranty service.

1. This Limited Warranty ONLY COVERS failures due to defects in materials or

workmanship and DOES NOT COVER normal wear and tear or cosmetic damage.

The limited warranty also DOES NOT COVER damage that occurs in shipment or

failures caused by products not supplied by the warrantor, failures resulting from

accident, misuse, abuse, neglect, mishandling, misapplication, alteration, incorrect

installation, set-up adjustment, implementation of/to consumer controls, improper

maintenance, power line surge, lightening damage, modification, service by

anyone other than a manufacturer-approved service center or factory authorized

personnel, or damage attributable to acts of God.

2. There are no express warranties except as listed under “limited warranty

coverage.” The warrantor is not liable for incidental or consequential damage

resulting from the use of this product or arising out of any breach of this

warranty. For example: damages for lost time, the cost of having a

person/persons remove or re-install previously installed equipment, travel to and

from service location, loss of or damage to media, images, data or other

recorded/stored content. The items listed here are not exclusive, but are for

illustration only. Parts and service not covered by this limited warranty are not the

responsibility of the warrantor and should be considered the responsibility of the

individual.

Simplified MFG Publication Disclaimer

The material contained in this document consists of information that is the sole property of

Simplified MFG. This document is intended to provide information to allow interfacing to the

relevant Simplified MFG equipment by third party products. Simplified MFG IS NOT

RESPONSIBLE FOR MALFUNCTIONS AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED

BY THE APPLICATION OF THIS INFORMATION, WHETHER EXPECTED OR NOT. Simplified

MFG reserves the right to change software, control codes and specifications without notice.

Simplified MFG will not be liable for any use of this information or any changes it may make to

those products. The use of this information constitutes an agreement by the user to these

limitations and exclusions.

Contact

Sales and Tech Support

P 1-833-HDMI-411 E [email protected]

How to extract audio

from HDMI

Sound BarSound Bar

HDMI Cable or Extender

Stereo or up to 5.1 Audio AUDEX1 HDMI

Optical or Stereo

1. Audio Extraction with no conversion. AUDEX1

extracts the audio in the format sent up to 5.1

2. Audio Extraction with down conversion. DAC1

extracts the audio from any format and down

converts it to stereo

HDMI Cable or Extender

with any audio format DAC1 HDMI

Sound BarSound Bar

Optical or Stereo

3. Audio Extraction with no conversion via audio

breakout on RX of EX1L HDMI Extender

Category cable EX1L RX

EX1L RX

HDMI HDMI

Sound BarSound Bar

Optical or Stereo

4. Fully uncompressed audio extraction from display

back to AVR via eARC (including Atmos)

Category cable

full uncompressed

audio returns from

display

EXeARC1 RX

EXeARC1 TX

HDMI HDMI

5. Several sources, no AVR audio extraction at

display to soundbar via SW4:1

Blu-RayBlu-Ray

STBSTB

SW4:1

Up to 4 inputs

Sound BarSound Bar

HDMI

Optical or Stereo

Note: SW4:1 does not convert audio

Can be switched automatically or with IR remote

also supports ARC from display

SIMPLIFIED MFG B08Z5R4VMH User manual

Brand: SIMPLIFIED MFG

Model: B08Z5R4VMH

Category: Soundbar speakers

Type: User manual

Download PDF

report

SIMPLIFIED MFG B08Z5R4VMH User manual

SIMPLIFIED MFG B08Z5R4VMH User manual

Related papers

Other documents