Balt 202AF Operating instructions

Type
Operating instructions
C091322 M091322
Whiteboard Care
& Cleaning Tips
1. If your new board has a label on the surface telling you to
remove the protecve lm, follow the instrucons on the
label and remove the lm at this me.
2. Use glass cleaner to remove any adhesive residue
le on the board surface.
3. Do not allow dry erase marker ink to remain on
the board for several days without erasing.
4. Clean your dry erase board weekly to prevent
marker color build up. Use household glass cleaner
with a clean, so cloth to keep your board surface
looking new.
5. Use a dry erase marker to color over areas that
are hard to clean. Then erase. The solvent in the
ink will equently clean the soiled area.
Alternave dry erase board cleaners:
Soap and water
Rubbing alcohol
Mul-surface cleaners
Ceramic stove top cleaners
Non-abrasive household cleaners
MooreCo Inc.
2885 Lorraine Avenue | Temple, TX 76501
p: 800.749.2258 | f: 866.888.7483
www.moorecoinc.com
  • Page 1 1

Balt 202AF Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI