2. urban ambiance
  3. UQL3977

urban ambiance UQL3977 Installation guide

  • Hello! I've reviewed the installation instructions for the UQL3977 light fixture. This document details the necessary tools, safety precautions, and step-by-step procedures for mounting, wiring, and completing the fixture installation. It also specifies that the fixture uses two E26 medium base, type A bulbs (not included). Feel free to ask me any questions you may have about this document or the installation process.
  • What type of bulbs does the fixture require?
    Are the bulbs included?
    What should I do if I have missing or damaged parts?
1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
2BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
E
Wiring Shade&Bulb
Table of
Contents
STEP 2 STEP 4
Fixture Body
STEP 3
Inner Backplate
STEP 1
Shade
x2
F
Inner
Backplate
x1
A
PARTS BAG
Mounting
Screw
x2
D
Outlet Box Screw
x2
B
Wire Connector
x3
C
Installation Instructions: UQL3977
www.urbanambiance.com
STEP 1
2of3
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
3of3
STEP 4 1 2
www.urbanambiance.com
/