2. urban ambiance
  3. UQL3982

urban ambiance UQL3982 Installation guide

  • Hello! I've reviewed the installation instructions for the Light Fixture UQL3982. This document provides the necessary steps for installation including wiring and assembly and lists the required tools and parts included. I'm ready to answer your questions about this device.
  • What type of bulbs are required?
    Are bulbs included?
    What should I do before starting the installation?
1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
4BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
E
Wiring Shade&Bulb
Table of
Contents
STEP 2 STEP 4
Fixture Body
STEP 3
Inner Backplate
STEP 1
Shade
x4
F
Inner
Backplate
x1
A
PARTS BAG
Mounting
Screw
x2
D
Outlet Box Screw
x2
B
Wire Connector
x3
C
Installation Instructions: UQL3982
www.urbanambiance.com
STEP 1
2of3
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
3of3
STEP 4 1 2
www.urbanambiance.com
/