Gianni Industries DL-360TB Installation guide

Gianni Industries
Brand
Gianni Industries
Model
DL-360TB
Category
Security device components
Type
Installation guide
Copyright © All Rights Reserved. P-MU-DL-360TB-N Published: 2018.11.09
DL-360TB Power Transfer Door Loop (Detachable Terminal Blocks)
Installation Instructions
Installation Steps
Remove the security screws
using the enclosed tool.
Remove the head covers.
Position the two end caps
where you plan to mount
them and mark the holes on
the door and frame.
Drill holes in the marked positions,
and secure the two ends by using
4x25 screws.
Screw hole diameter: 3.3mm
Outlet hole diameter: 12mm
Mount the head covers and
tighten the screws.
Wiring Diagram
41mm
30mm
*Each terminal is wired on a one to one basis.
Whatever is wired to a particular terminal
number on one block will be connected to the
same terminal number on the other block.
56mm38mm
12mm
1
2
3
4
8
7
6
5
Screw hole
Outlet hole
(1) )3()2(
)6()5()4(
Design with convenient terminal block concept and
saves installation time
Full system test prior to unit installation saves
considerable time
No chance of accidental site damage during last
minute installation
High grade components optimism operational life
Patent M510002
Attach the wires to the detachable
terminal blocks and plug into each
end.
DL-360TB with
Detachable Terminal
Blocks
Voltage rating 2A/12VDC
  • Page 1 1

Gianni Industries DL-360TB Installation guide

Gianni Industries
Brand
Gianni Industries
Model
DL-360TB
Category
Security device components
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents